Wts aaa evol 30. As new, very few rounds fired. Should still be under warranty. 2 factory, 1 Carm, ss tray. PayPal acceptable. Offers considered. Now $1800!! Ok, $1700 plus shipping. End of this.
Thanks, Doug

Benjamin marauder .22 synrod works perfect no leaks 450$ obo or trade my number is 601-641-1504

The ExtrudeHone company presented its rifling barrel method as the best so far in terms of speed, precision and price, I hope it's not a fairy tale.

Viper in excellent condition.

Hi Guys,

Names Jeremy and up for sale is my Zeus 58cal it’s gen 2 with a 32 inch barrel and the build was just completed and this rifle has had a total of 8 shots fired through it since me buying it new either April or may of this year. So with the Mountain Metal kit on this rifle as the gun sits in the picture I have about 2,500$ in it. I’d like to get as close to 2,000$ for it as possible as the gun is still in mint condition it’s had 8 rounds through it and a lot of love and no scratches at all. Please feel free to contact me at 3527403952. Due to a family emergency I’ll need to sell for cash and am unable to trade at this time. I honestly haven’t even got to shoot it in the chassis because of medical stuff going on but my loss could be your gain it’s definitely a power house and a 16inch barrel swap make this guy hunting season ready for carrying around in the woods right now it’s definitely outfitted for long range shooting. I have the 72 cal Mountain Metal Barrel Band & 72 cal Self-Timing Muzzle Break as well included as well as wood stock to go with it.
Local pick in Bowling Green Kentucky would be awesome but will ship for free with tracking with purchase of rifle. Will send copies of my identity and will need proof of yours as well as signature for the rifle upon delivery but would be awesome for you to see the gun in person and make decisions.





View attachment 488525

View attachment 488526

Not sure if anyone here will know the answer to this question. But I have an old chonry. It's the fold up shooting chory beta modem. Picture below. It uses 9v battery to power it. The battery runs out all the time and i always get the low battery warning. I'm tired of getting 9v battery for it since they cost like $8-9 for only 2 battery. I was thinking of cutting off the wire and attach an dean plug so I can use an lipo battery. The lipo battery will last way longer and I can always charge it. Then I won't have to buy those stupid 9v battery. But lipo comes in 2 cell (7.4v) and 3 cell (11.1v). The 2 cell is probably too low for it. The 3 cell when fully charge is about 12.6v. I am worried the 3 cell lipo will fried the chonry. So my question is, does anyone know if it's safe to use an 3 cell lipo battery for these type of chorny?

Looking to buy an airgun from them gad anyone bought from them before.. are they reliable? Take care of their costumer? Claims, issues, warranty, any problems thanks.

Hey Guys,

Never thought I’d be selling any of my stuff especially before even getting to use it but I’ll have several ad’s unfortunately going up due to a family emergency and me needing some (financial help quickly) and would prefer a local pickup if possible but I’m open to sell via shipping if needed.
I live in Bowling Green Kentucky and my name is Jeremy.
Up for sale is an unused Fx True Ballistic Chronograph with receipt. I’d like 800$ for it if you pick it up and I can ship it however you’d like as long as you’ll cover the shipping!
My phone number is 3527403952 if you’d like to call and talk to me. Appreciate ya checking out my ad.

I'm in need of a moderator for a 357 build that has 1/2-20 threads. Currently has a mod but it still requires me to use ear pro when the gun is full tilt.

I was thinking of getting a 30 cal Donny with 1/2-20 threads and just bore the passages open for the 357/9mm projectiles to pass thru.

Shouldn't compromise the moderator I think. Going bigger threads isn't an option, nor is shrouding the barrel on this one.

Anyone know which mod, Donny or other serviceable type brands, that can handle 130 fpe and make it backyard friendly or at least mostly?

I'm not sure why, but 2021-2022 has some of the best AGN hunting threads I've read. Thankfully I was able to be a part of that era. We had guys nailing everything from chipmunks, raccoons, squirrels, and woodchucks to hogs, coyotes, nutria, deer and more. Then the pesters were going crazy on starlings, rats, grounds squirrels and more. I may have to start compiling some of my favorite threads from that period. Maybe it was due in part to the pandemic shutdowns. I'm not sure, but we had a nice crop of airgun hunters. The one's I can think of are @gendoc, @Cheplicki, @AncientSword, @davidsng, @jwrabbit123, @Emu, @Flintsack, @sasquatch, @Monkyshine, @L.Leon, @Max115, @N2 Shooter, @Blackpaw, @Dairyboy, @dizzums, @Gerry52, @orion, Dana from Mountain Sport Airguns (he no longer has an AGN account, but still has a YouTUbe channel. His threads and videos have the username "Removed" on AGN) and more. Some folks had different user names back then, but it was a very active and memorable era. I know I left some folks out because I'm not recalling everyone off of the top off my head. I went back and reviewed threads from page 65 to around page 109 in the "Hunting" forum this evening. Good stuff. I got a bit nostalgic reading some of my older threads. I'm glad I documented some of my activity and shared it with y'all. One thread in particular was some of the best time I've ever spent airgun hunting. I learned a lot and some members were extremely helpful in my learning. For those that were around and participated in the beaver thread, thank you all for being a part of it. I loved it!! If you go back and read some these guy's threads, you'll probably learn some things. You will definitely be entertained if you're into hunting and outdoors. I don't know what's going on right now, but I'd like to see an uptick in the "hunting" forum. Some variety and excitement. Many of us used to get excited to be outside and excited for one another. I miss that. I dont' know what to expect in response to this post. It was just something on my mind.

RTI Prophet Performance with the .22 long range pellet barrel. Shoots the Redesigns at 970 currently with more than enough room to go up or down to shoot the 18.13.

Very accurate, reg is stable at 140 bar and comes with 2 magazines, hard case, after market cheek rest. Not a safe queen by any means but functions as she should and the accuracy and power for these guns is damn impressive.

Bought this for a small barn gun but just more than I need for what my purpose is.

Say 700 shipped.

Scope, rings, Atlas bipod and moderator not included.

I almost pulled the trigger on the m4 but then found out they got rid of the 1st reg. Why did they get rid of the first reg for? To save cost? Or were ppl having too much problem with the 1st reg. I think I saw where ppl say they getting leaks from it. If fx got rid of the 1st reg then why sell it for $2199? Why not sell for $2000 since you removed the 1st reg and put a plug in. Now we have to spend $40 on a new gauge and $100-150 to get complete 1st reg to install on the m4. I could just get a m3 but the m4 look way cooler with other upgrades so why would I downgrade to the m3. But I am not gonna get the m4 due to them removing the 1st reg. Aint gonna spend $150-200 extra to install that. The reason I want 1st reg is to use 300 bar bottle and also lower the bottle pressure from 300 bar to 180 bar b4 it goes into the 2nd reg so less stress on 2nd reg. It will also creep less and also get more shots. Isnt that the reason they put the 1st reg in the m3? To battle reg creep and put less stress on the 2nd reg. Can't believe they would downgrade on that part. I guess I will wait for the m5 and see what happens.

Hey All,

Bought this on a whim for my daughter and is a bit much for her.

Original FX Crown .30 in green laminate stock, 600mm 1:40 liner, DonnyFL adapter, one magazine, regulator upgraded to current brass version and is very consistent.

Currently shooting the 44.75 at 850 on 145 bar reg and is smooth and quiet with the typical FX accuracy. Can be tuned for more power if desired.

Stock etc. is in fantastic shape.

Scope, rings, Atlas bipod, DonnyFL moderator, bottle clamp NOT included

Say 750 and we can half the shipping.

After much searching of countless reviews today, with screws falling out, bolts that have a heavy drag, triggers that freeze, what's described as a flimsy pump system and so on from some of the Seneca Dragonfly Mk2 owners and their reviews (although their are plenty of happy 4 and 5 star reviews that state no problems right out of the box) I've come to the conclusion that there has to be a manufacturer with better overall quality control than what I'm seeing from Air Venturi. It's maybe a step down, at least in price, but does Crosman still manufacture their air rifles in the USA, I've seen a general consensus in their reviews that for the low entry level price they are pretty reliable and accurate air rifles. It maybe that with the low prices no one has high expectations but I'm not sure.
I may have to give up my search for a multi-pump and go with a break-barrel but for now I would like for my first air rifle to be an accurate and reliable multi-pump... Any comments or suggestions would be appreciated...

Has anyone used 1/4 tubing for a transfer port for more power in their benjamin marauders does it hold up good and seal good? I'm building a .22 marauder slug gun

I won this in a raffle. It is new, never fired. 250mm barrel. $1800 shipped continental US

Old NOOB here,

I was taking one last look at my CZ 457 Pro Varmint which I am trading for an FX Streamline. For what I use an air rifle for the Streamline seems a fair trade. However, I have been looking at BRK and Daystate prices and wonder what makes these so expensive? Do you never need to change O-rings? Are they more accurate than powder burner Bench Rest rifles? Where does the perceived value come from for these >$3K air rifles. Or in what competition among experienced shooters do these expensive air rifles beat the "cheaper" competition. I'm not criticizing but am interested in understanding the value between a $1200 air rifle vs a +$3k air rifle. Will the squirrel be able to tell the difference? Or will ranking at some "national" shooting event tell the tale?

[No trade offers on this listing please...]

Hello AGN,

I'm selling my pride and joy: an absolutely beautiful custom FX Impact M3 Power Block 0.22 600mm professionally cerakoted in Distressed Red & Black w/ matching red FX high capacity Side-Shot magazine w/ Orion insert, Saber Tactical ST0034 Top Rail Support (TRS) Standard, Saber Tactical ST0022 Arca Rail, Saber Tactical ST0054 Ambidextrous Cheek Rest, stainless steel bolts installed and factory FX hard case. What makes this M3 stand out is the professional "distressed red & black" cerakoting done on the TRS rail, trigger guard, barrel shroud, cheek rest, rear side plates and cocking bolt. This is a multi-step process where the parts are cerakoted twice in the two different colors then hand sanded down to reveal the color underneath (this costs about $400-$500 to do given the time/labor involved). To top it all off, even the Hogue grip and FX magazine are accented in red to match the rifle. This rifle looks amazing and while it might already look pretty nice in the photos, you really do have to see it in person to fully appreciate it!

Performance wise, this rifle is currently set up to shoot 26.54g JSB Hades pellets at 880-890fps with great consistency and accuracy. It also comes with a complete set of stainless steel bolts already installed (with anti-seize compound applied); these bolts not only look better - they'll wear better over time as they will not rust. This rifle is in immaculate, as new condition, holds air perfectly and shoots extremely well.

Price is: $1950 $1850 $1800 plus 1/2 shipping within the continental US (scope and mounts are not included in the selling price...)

[Please note that the price is firm as you're getting about $450 in upgraded Saber Tactical parts as well as $400-$500 worth of cerakoting work on this rifle...scope and rings are not included in the selling price.]

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here as well as dating back to the old Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

I’d be glad to pay the shipping on these if you have any laying around that you haven’t tossed yet, and they are the plastic trays that the fx hybrids come in. The 22 caliber trays, I need four of them. Let me know if you got some laying around
Thanks!

EDIT- NO LONGER NEEDED!
Thank you to the folks that followed thru and sent me these trays!!

I’m looking to get a gun for both extreme field target and benchrest. Having a hard time making up my mind and would like some advice from the pros. It’s a big purchase for me. I’ve narrowed it down to a Redwolf, or Skout Evo. Seems like the Redwolf has been dominate in extreme field target years past. Do the Skouts perform well in an extreme field target layout? I’m new to the sport, so sorry if I’m asking dumb questions.

Ammo would be something you’d buy.

I will cover shipping cost to you. You will cover shipping back.

My LGU .22 and CZ .177 are both rentable as well.

Of course, I’ll need information from you to verify the rent, and so that it’s a safe process.

Let me know.



IT WILL BE A VERY EASY PROCESS FOR BOTH OF US IF YOU’RE IN SACRAMENTO/BAY AREA!


Picture of how you’d be receiving them is attached. Both are scoped. This Hawke Sidewinder’s reticle is on ChairGun…you can dial to any range. LGU has a Bushnell 4-12. CZ has no scope.

ALL ARE READY TO SHOOT. LGU is sighted in at 25 yards with 15.89s JSBs. Impact is sighted in at 50 yards with 27 grain NSAs.



Rent availability as of now:

Impact: NLA
LGU: Available
CZ: Available

I’ve got a MK2 Impact. It’s slug ready with 2023 superior heavy liner. 700mm barrel and 580cc bottle. It is tuned for 27 grain NSAs. If anyone would like to rent it, hit me up and let me know what you think is reasonable for a rent price and duration.

Ammo would be something you’d buy. I can supply an air tank.

I will cover shipping cost to you.

My LGU .22 and CZ .177 are both rentable as well.

Of course, I’ll need information from you to verify the rent, and so that it’s a safe process.

Let me know.


Picture of how you’d be receiving them is attached. CZ has no scope.

.22 AGT Vixen Short in perfect condition and very accurate. Gun is extremely quiet with an integrated custom BDIS (backward directed internal stripper) AGT made moderator.
It comes with:
Four original .22 magazines, custom 3D PETG printed handguard, three mags holder and butt stock
Fill probe, case and all original parts.
$850 includes shipping to Conus, not interested in any trades, PayPal F&F or you pay the fees.

I have a 22 acre mini-farm on a mountain top with a small cabin and I have a neighbor that has no intentions of ever keeping their goats on their property since most of their land is forested and so for a while now their goats have been coming to my pasture to graze and now that I'm retired I'm seeing the damage they are inflicting on my dogwood trees by standing on their hind legs and feasting on the leaves of the lower limbs so I'm looking for an air rifle that I can target the hindquarters of the larger billy goats with steel bb's or possibly pellets and I figured by using a multi-pump rifle I could dial down the impact sufficiently to run them off but do no irreparable harm and once the billy goats are on the run then the rest of the herd will follow. I'm wanting to try and sting but not penetrate their hide. Any suggestions as to a particular brand and model would be helpful since air rifles are an entirely new world for me. I was hoping for something manufactured in the U.S.A. or at least something not made in China...