I'm the original owner with the original box and all that came with the gun. It has 3 Daystate magazines and a Daystate single shot tray. Has HUMA regulator. 600MM barrel.
$800.00 plus shipping

I’m getting ready to get a new EVO and I am going to use it for pesting raccoons on occasion. When you degas the rifle after using it, does it change POI when you gas it up again? I’ll typically wake up in the middle of the night when these raccoons show up and I need the rifle dead on when turning the bottle valve on. Raccoons require a perfect head shot and a changing POI rifle isn’t good.

I had a nightmare scenario happen with a FX one time and don’t want that happening again.

For sale is this AGT Uragan 2 600 mm barrel in .25 cal. I bought this air rifle this last winter and have probably put 1 to 2 tins of pellets down the barrel. It's a great gun , but it just doesn't fit me. Like every AGT , it's built like a tank with great fit and finish. I took it out today and shot 6 10 shot groups at 50 yards . The wind was probably 4 to 5 mph and a slight overcast. I did not cherry pick these groups , this is how it played out. I'm not a strong shooter , but I think the gun did a very good group with the FX .34 gr. pellets. This gun is $1595 plus shipping new..............................I'm selling for $1200 NOW $1175 shipped with insurance to the conus. What is in the picture is included , the cylindrical noise reduction unit also includes 2 extra sections . although not needed. At my listing price , you have some coin to put some great glass on it. Not interested in trades or offers at this time. Please deal by pm.
Thanks for looking . Herb

Hi folks! I hope you're doing well.

I know this question has been asked a dozen times, but I just want to make sure, so I apologize for beating a dead horse quail here.

Can I use goo gone to clean my Lothar Walther barrel? I know we are not supposed to use products with an excess of petroleum, and I see goo gone has petroleum distillates, but I honestly am not sure if that is the same significance.

I also have 99% ISO - would that be suitable? I sort of figured not, because it will destroy any lubrication or maybe damage o-rings.

Thanks in advance!

I've been struggling with a decision on my Sidewinder for some time, and it has to do with quieting down the action. I had been thinking that if I put some mastic over the sides of the action it might help quiet down the gun some, or at least improve the sound quality of the gun when shot. But I knew it would not look good, so I had not tried it until today. It turns out it works great, and both quiets the action AND improves the sound quality!

I find the gun to be a great shooter, but the action is so loud and jarring (in terms of sound quality) that it really is not pleasant to shoot without adding hearing protection. I found that I was just not shooting it much anymore, so I decided that I should either go ahead and try the mastic or just sell it to somebody that would shoot it more. I also have a .22 Huben K1, and it has been so much more pleasant to shoot - to the point that it was getting all the use and none was going to the Sidewinder. This despite the fact that I had tamed the muzzle sounds a lot with a Huma 40 moderator on it - but the action noise remained, and it was very loud and unpleasant to shoot (at least to my ears).

So I put some on both sides of the action, cutting it to not cover anything functional, and tried it out. The results are fantastic! It now is in the situation where the impact of the pellet is far louder than the gun, and it was nowhere close to that before. In fact, the impact sound to the shooter was barely louder than the ringing and vibrations coming from the action before.

Sadly, I have to admit that the result is that the gun looks like it was hit with an "ugly stick," but the acoustic results are too good to pass up. For me, the choice is one of having a nice looking gun that I don't really want to shoot, or a gun I can enjoy shooting even if it looks no where near as nice . . . I gotta go with "form following function" in this case.

Here is what the action looks like now - it looks ugly, but sounds great:

Got this in May rom AoA and shot about 20 rounds through it, enough to know break barrels are not my thing and I will stick with my pcps.

$375 shipped conus obo

My cell is in the picture for faster contact

I just received my new to me D75 and am a little confused. I believe it is a 9mm front dovetail but the nice Gehmann front sight and what seems to be a riser are both 11mm. I nave a picture from the seller showing this sight on the gun, no idea how. Where is the best place to get a 9mm to 11mm adapter to replace the Gehmann riser. The original front sight is also pictured.

WOOHOO. These look nice and are priced right.

Selling a custom .357 carbine that can also be converted to a pistol. Comes with a pistol barrel, 2 longer carbine barrels (threaded for 1/2”-20 UNF), rear sight and rear cap for pistol setup(not pictured).
comes with custom moderator that works very well and 2 sealed tins of pellets.
gun produces 150FPE with its full fill of 3000psi with 2 accurate shots.
custom Cothran power house valve installed and porting done.
i have taken a couple hogs and a few coon's with it. got a new project coming
so this has gotta go. no leaks and functions properly. very accurate & fun airgun i must say !!

caldwell turrent, scope & rings not included!

$350 $300 shipped, CONUS paypal friends or add 4% for the fees.

as always, i thank yall for look'n.......

Just as the title asks, I'd like to know which airgun manufacturer has the best customer service in your experience (you make pick two if you must). This can includes aftermarket support and warranty services. I'm not asking about the customer service of the vendor or shop that you purchased the airgun from, but the company that made the gun. Also tell us a little about your experiences and why you selected the manufacture that you chose. If the best experiences occurred with another company please name them and tell us about your experience(s) with them.

Help please! I am new to pcp. I bought a Umarex Notos. I tried the hand pump option and decided it wasn't for me. I then bought an air compressor for air guns on Amazon. Here is the link: https://www.amazon.com/dp/B0BZ7F8H8V
It seems pretty straightforward but after 35 minutes, the needle has not moved. I disconnected it, turned it on, and a little bit of air (similar to the hand pump) and a fair amount of moisture came out. Am I doing something wrong???!! As always, thanks for your help. You guys are always very helpful!
Will

Does anybody use this gun for HFT? My mags load from left side and would interfere with yardage wheel. Is there a single feed ( CARM) loader that slides in the right side or am I just over thinking this?

I am just starting into this whole airguns thing and have been enjoying the heck out of my .22 RTI prophet. I was thinking of a .30 cal barrel kit, but want to see what deals are out there on a second rifle to further this pneumatic addiction. Whatcha got?

Thanks!

this magazine was left on the window sill for 2hrs while i was out for a job interview.. its all warped and won’t fit into my rifle anymore. what’s up with that maple/carm?

do you all think they’ll replace it if i send them a message?

I have a used good shooting Concept XR 22. It has some wear marks but operates flawlessly. It’s tuned to shoot 18gr at 880 currently. I always grab one of my compact rifles to shoot instead, so it’s not getting used. I put in a brand new huma reg, I still have the factory huma reg and a huma rebuild kit. It also has the folding stock adapter, and comes with the solid mount if you want that. I put a Magpul grip on it. If you’re interested I will send photos. There is a wear mark on the lower just above the safety, it’s just the finished, not a scratch. I bought it used with that mark already there. No optic, rings, or moderator included in the deal.

Top of my list trade would be an atomic 22 first, or a 177. I’m interested in a lot of compacts so let me know what you have. Sorry, I’m not interested in any FX.

Hello, I bought the Huben Cricket power regulator brand new directly from Huben. I put it on my Air Force Condor 22 cal, and the speed and power of the gun was literally cut in half.
The 40 grain .218 slugs shoot 907 fps without the regulator and 523 fps with the regulator. The lightest slug I have is 21 grains and they shoot 817 fps. The shots are all over the place too.
Shall I just give up on the regulator idea or is there something you guys know that I can do?

Vulcan 3 700mm
30 cal... 54gn slugs @ 976 fps

Bullfrogs are outta control in Arizona. Big problem for local Native Lepard Frogs, and they eat anything they can get their mouth around. Also can carry Chytrid Fungus which can basically wipe out other amphibians, sooo...today is eradication day!

I'm using Strelok Pro with with Zan Slugs and an Impact MK2 with the Heavy Slug Liner with a 1:18 twist rate. The projectiles are .25 Zan 37 grain. It's zero'd at 50 yards.
Projectile weight: 37.05 grain
Projectile speed: 985 fps set to measured temp and humidity (Metro)
BC 0.108
Target distance: 120 yd
Scope height: 8.0 cm (first focal plane)

Angle is minimal

The app says at 120 yd, the elevation should be 2.7 MRAD but in order to get on target, I'm having to set things to 3.4.
With NSA slugs it was very close to what the app called for. Having much better luck with ZAN.
So it's a riddle....what do you think I might be doing wrong?

Note: the scope is on FX elevator rings; perhaps that's messing with things?

Thanks for the help.
K

Planning to get one in .22, for a single purpose in my mind - my backyard property damage protection.
A single shot is fine with me but I need a good knocking power up to 20y.
I can get both at my location, which one to chose.

Selling my Fx Dreamline .25 cal with the much-desired Saber Tactical Chassis. FX replaced all seals last summer.

Comes with:
Arrow kit with 11 GoldTip Swift arrows
6 tins of JSB pellets
2 tins of JTS dead center pellets
200 count of Zan 33 grain slugs
4 magazines
FX case.

Lets get this off my bench and on yours $1000 Labor Day Special


I will be at the Pyramyd Air Cup to save shipping.

40th Anniversary Kymira .22 PCP rifle.
Comes with manual, hard case, fill adapter factory, two magazines, cardboard overbox.
Approximately 75 pellets through it. On par easily with Daystate Huntsman Revere regulated. Getting out of PCP’s, staying with springers.
Gun is three weeks old and in perfect condition. $1200+ shipping.
I do not have PP or anything like that. Cash, personal check, bank check or USPS Money Order. CONUS ONLY. I have an excellent seller feedback. My posting is 100% accurate. I have zero interest in compromising my excellent seller feedback.

I spent like 10 minuets on the boxes then got bored and drew the awsome anmials