Vulcan 3 700mm
30 cal... 54gn slugs @ 976 fps
15 yards

Almost passed on this one, it was soo damn close. Normally would have passed on such an easy shot but been a slow week and need 2 more rabbits for my stew

I set up a Birchwood Casey rimfire dueling tree in my back yard. This because I get bored shooting paper at the local firearms ranges and much prefer shooting steel. So I bought a Vevor pcp air compressor, Hatsan Jet 2 .22, and the dueling tree, to scratch that itch in my back yard. I am shooting off hand at 3" plates 15 yards distance. The Jet 2 is plenty accurate for 3" plates at that distance but it doesn't hit hard enough to reliably swing the plates around, even after applying lithium lube to the dueling tree. Ergo the question. How many foot lbs do I need. Maybe the Jet 2 in .25 would have gotten it done, but having shot the .22 for a couple months, I don't love the feel of the gun, + I am wrong handed for the lever, so still a lower level of satisfaction than I would like. Reading, I am not finding a specific answer anywhere to my main question. I suspect that a HW 44 in .22 might be a good choice for its accuracy and power, and the ability to switch the lever to the wrong hand, but I would like to read the opinion of the experienced folk on this forum. Also, in the $1K range of the HW 44 there might be far better choices of which I am unaware. Also looking at the .25 Viper and any GK1. For myself the only issues I have with the GK1 are, it's more of a hand cannon than a pistol, and my Vevor only pushes to 4500 PSI.

Hi,

I have the Yong Heng. Had it for a year or longer. No issues so far until today.

The compressor was not used for a few months. I have filled my Uragan II twice today. First to around 250 bars. No issues. The pump ran a little long because the gun was completely empty. The pump did seam to crank up a tiny bit slower than what I've remembered. Just enough for me to take notice. Other than that everything normal.

Next, about an hour later, I filled from 200 to 300 bars. When I disconnected the probe from the gun suddenly a good bit of water dripped out. It also looked like it had some "white" substance in it. But after it evaporated it left no marks. It is very humid here right now and the pump is not under AC. But it was the same last year and I don't remember water coming out.

Also, now I am wondering all this water is in the gun, the tank, etc. Perhaps I need to send it in for service. The gun has a tiny small leak anyways. It will deplete after a month or two. I need to send it in regardless eventually.

I guess my questions is two fold. Does the gun need immediate attention? Do I need a new pump?

Thanks!

Selling my lightly used wood stock tube avenge x in .22. has been amazing just moving to something more compact. Shoots ragged holes at 50.


Tuned for 18.13 JSB @ 905 and getting over 75 shots per fill. Great plinking or hunting gun.

Message me for more details. Scope not included.

$400 OBO , Buyer pays shipping.

Tell me what you guys think!

Buck rail handguard and picatinny rails
Deciball
Tactical light
2 carm mags
Utg bipod
6-24X50 aged scope and sunshade
Single point harness (picatinny)

I finally found a great combination sighting system for my pistol. First I tried open sights and couldn’t do too well, then a pistol scope and no joy there. So today I mounted a BSA compact rifle scope and I’m loving it. I’ve got it signed in for 10 yards and go just 2 pumps. A fun combo for sure! Charles

I think so But maybe assembled in a different plant. Maybe there quality control maybe not the same as good or maybe better. There
prices are all over the place. We may never know. I would think if someone bought one & tore it down, & checked it over making sure
all the bolt had lock tite on them & checked over, you could save money. You know they do not produce their own parts. They get
them from the same plants. I might bite the bullet & do that.

Fly

What is the max bar on the m4 here is what the manual States 5.2 Pressurize
Max overall pressure in system
Singel regulator setup = 250 BAR (more info found in section 8).
Dual regulator setup = 300 BAR (more info found in section 8).
Maxairreservoirpressure:Seemarkingsonairreservoir.
Remove dust-cap (34) Close ventilation screw on the charging source.

So do you need to get a first reg to use a 300 bar bottle?

Looking to get a new gun and my safe is full so I gotta make room up for grabs is a mk2 .30 with power plenum and a donny 1 mag 700cc bottle and stock bottle with no valve has a stx superior liner and a standard stx liner comes with stock plenum and block looking for 1500 obo

Hadn't been to these fields since last summer but touched base with the landowner and he told me to please come kill as many as I could.


Leaned on this fence for maybe 10-12 of them.

With all the grass, this area is kinda tough. All in all, spent about 2 hours and popped 35.

Used the Ghost and the JSB .20/15.89 pellets at around 920fps for just shy of 30fpe. Closest was about 30 yards, furthest was 184. Stuck to pellets because of the vicinity of horses.

At the gate I met the lady who leases the fields for her horses and she suspiciously asked what I was up to. Told the truth, shooting prairie dogs. I saw a flash of concern so I told her it's a relatively low power airgun capable of pdog head sized precision and that the only thing that will have extra holes when I'm done is the pdogs. That eased her concerns. She watched for a bit and then came over to tell me where more were, I presume because she saw that I was safe to her horses.

One extreme large one was lumbering around and I dropped him. I usually don't retrieve but I needed to see this chunker up close. He was a monster, by his BMI, MORBIDLY OBESE. Might be the biggest one I've ever seen.
Large one on the left here, next to him is the average size of them for my area, the two on the right are young ones, probably this year's pups.


Ghost is just the perfect tool for this.
Lots of fun!

24 inch barrel condor .25. Ar grip, 2 piece max size orifice . $400 obo.

Marauder pistol, comes with 1/2x20 extended adapter, larger transfer port and og transfer port as well as a utg red dot and a extra magazine.

Will be shipped in factory box.

$215 shipped pp f&f or $190 if within driving distance of metro detroit.

SOLD!!!!!

When I joined up here 7-8 years ago the Predator Polymag was a big favorite for hunters/pesters. Now you don't even hear a peep about that projectile.

Is anyone still using them? Or, have they been pretty much replaced with hollow-point slugs in their application?

I just don't find Myself shooting this very much so I figure I'll let this thing go.
Three magazines and the fill adapter included.Gun is accurate and holds air indefinitely.
This is the bonded moderator short barrel version.Scope is an FFP Ohunt that's been reliable and is included.

$775 Shipped lower 48 where legal

paypal preferred as goods and I'll pay the fee.Ships UPS ground.

Find out all you need to know about the Reximex ACCURA air rifle in this comprehensive review. Thanks for watching! -Nate

Vulcan 3 700mm
30 cal... 54gn slugs @ 976 fps
Dragon Fly @35 yds

I'm zeroed @ 25 and 50 yards.... @ 35 yards I'm about 1/2 mil high sooooo...
aimed 1/2 mil lower and SPLAT!

I gotta find a new spot for rabbits.
Nothing today again so to keep from getting rusty I'm smacking dragonflies

I just got the email from Airgun Depot that the Umarex Zelos is in stock. Just wondering if any of you pre-order-ers received it earlier and have done any testing on it? How close is it from the Snowpeak? I assume marginal difference (Non bottle version). I'm really pondering on picking one up in .25 caliber for small game hunting.

So a friend gave me this cable tie with a twist knob on it for a "throw lever" on my Zulus, but I have no idea where to get more and neither does he Anybody know what this item is really called?

Tony P.

I'm thinking of getting something in .22cal and like the looks of the BRK Sniper XR with the laminate stock. The length seems reasonable and the power adjuster is a plus when 30fpe isn't needed. Anyone have one and care to comment?

$650 cash if within driving distance of metro detroit. $725 pp f&f shipped elsewhere. gun has a huma regulator 3 magazines and 3 mag holders, SCOPE IS NOT INCLUDED. donnyfl IS included.
currently shooting mk2 jsb heavies at 900fps.

includes 3 tins of heavies and a hard carry case that it will be shipped in.


SOLD LOCALLY

Hello all!

So, I've convinced myself that I need a small semi-auto .22 FAC PCP just because.

That said I've gone down the rabbit hole and ended up with the "best" options, the GK1 and the Leishy 2.
I know the leishy 2 is not really a pistol, but if I buy the GK1 I'll adapt a carbide stock with fast disconnect. I want to be able to shoot at 50yds with either. And I would like if it wasnt too loud with a supressor.
I know both are good with some flaws, but I'm not sure what I really should get. The main downside (to me) from the leishy is the price, and from the gk1 is the fixed mag.

You guys think that the fixed mag is not really a big problem?
Are either not that loud with an apropriate moderator, or neither are backyard friendly without a huge moderator?
Can I get the pieces to mod an GK1 in europe?

Thanks for your insight!

Selling one of my Notos and goodies I acquired in the past few months. The gun was bought new in Feburary, 2024.
There is a missing screw in the grip panel, but it doesn't affect the functionality of the gun.
I'm selling because I need to fund my new hobbies.

Item list:
* Notos .22 PCP rifle ($230 Value)
* Bug Buster 3-9 AO mil-dot scope with QD rings ($80 Value)
* 3 Factory magazines (Free)
* Picatinny bipod mount ($10 Value)
* Picatinny Stock adapter for you to mount folding stocks ($20 Value)
* A small can of 250 JSB Hades pellets ($10 Value)
* And the other stuff I can't describe here ($40 Value)
* Added a beautiful Mlok handguard ($30 value)

Shipping included to CONUS
Get the whole package for $420 $299
or without the scope for $340 $239
or best offer

I'm new here but a reputable trader on Reddit. I'll accept Paypal F&F or Venmo.
PM me if you have any questions. Thanks!

I've had my fun with it and moved on to others, Great gun. Comes with one mag, fill probe and will ship in factory box. It has a power plenum installed for kicks so the tube is a little longer in the picture. Shoots 18.1 gr JSB at 925 fps with or with out the plenum so I had intended on removing it but got lazy. Also comes with the Aeron Rail to clear the magazine. This is the newest version of the dream line and I bought it new from Utah airguns. It came with and FT Stock that I sold and put on the Walnut stock that has a picitinny rail on the fore arm. $925 covers the paypal fee's, $900 if pay by usps MO.
PM me if you want any more info
Chip Smith

HW30 in .177 caliber. Traditional stock. Been tuned with a Vortek PG4 kit. Stock has been custom worked. Bisley butt pad added. Original included. Original spring, guide and seal also. Front sight inserts included. As new. Less than 100 pellets through it. Just not used and will fund another. Can’t seem to locate the original box. $400. $25 shipping. $45 West of Mississippi. Continental U.S Only.

Hello guys, anyone know where I can order the fx barrel tension clamp for the impact? I just want the clamp, not the kit. I have the 600mm impact so it's pointless to buy the kit since the kit only comes in 700mm. But site like prymaid air, Utah airgun, talontones, airgun depot, they only sell the kit. Like wth, why not have an option for us to buy the clamp without the kit. I see blackwood outdoor sell it separately but that's outside the USA. I am looking for a dealer in the USA that will sell the clamp separately. If you know a dealer in the USA that sells just the fx clamp, post it here. Thanks