Just me and my FX Verminator. Oahu, Hawaii.

Hello,
I have a super nice Vet in .25 with several magazines, o-ring kits, biathlon style cocking handle, digital gauge (originals also), speed dial, with attached Donnie FL Tanto. I have gotten out of the airgun hobby, and need to move it. I am located in north Alabama, but will ship CONUS for $925. There are zero known issues with the rifle. All I ever did was shoot it a bit.

I purchased the rifle here, on AGN a few years back. It is in immaculate condition. Please PM me for pics, and I can text them to you or discuss on the phone.

Thanks for looking,

Chris

The holiday season is upon us!

Certainly we’ve all had our eyes on a special something for our favorite shooter.

Personally I’d love a custom stock for my favorite Airgun to wear at the next turkey silhouette shooting event. My Marauder HFT pistol needs a new dress. Just can’t decide between a short skirt like corrocan makes or a full length evening gown like Airgun revisions sells.

How about you?

Daystate Air Wolf MCT with the carbon fiber bottle in .22, with 3 mags. This thing is an absolute laser. I have gotten 1/4 MOA groups at 30 on more than one occasion with jsb 18's. I just never shoot it. Has a few small pressure marks and a slow leak $900 shipped Paypal F&F

Great little gun, just don't shoot anymore. No issues, loves the jsb 15.89. Includes fill probe and 2 mags
$750 shipped Paypal F&F currently tuned for 40 shots at 24 fpe

I recently bought an Fx impact m4. It seems to be shooting inconsistently on a double stand setup (no I wasn’t holding it) when I was zeroing it. Would anyone know the reason?

This is one of my newest old rifles, a HW50 I believe from 1972. I was shooting it and it was making noises that were alien when jacking.
I took apart last night. First rifle I was able to just twist off the trigger housing without pounding it. Felt like Sampson.
I read a post where Mycapt said to sand the slot for the cocking shoe. Bingo Not the cleanest pic. He think he nailed it. A big thanks.
When I removed the piston this was it’s position. 1/4 turn and it fell out.Is this the correct piston seal?
I read here the transfer port is different for the leather seal. I will convert back if it’s leather. The gun was accurate .
I took some of the sharp edges out, did want to go too far A few deep gouges hopefully smoothed out enough.
My main concern is the piston seal. Crow

Never used 580cc 300bar carbon fiber bottle.

Manufacture daddy of 11/2024

Say 125 shipped

After getting more into hunting in thick cover, I'm considering incorporating air bolts into my hunting repertoire. What I am unable to get around is the idea of finding bolts that passed through the animal traveling into brush and soil. Without an illuminated nock these will be very difficult to recover. Can any members suggest options to illuminate another part of the bolt to aid in recovery?

Hi All,
Hope someone can help me find a replacement bolt probe handle. It's for a .357 Rogue. I snapped it off in the probe but was able to back out the threads and remove it.
It's 55ish mm long and stem is 6mm. I'm guessing thread is 8x32 which I think is standard for benjamin ?
Just looking for where to get a replacement or if someone can machine one ?

These came with a package I bought and have no use for them.

All are unopened, full tins.

1 tin JSB knockouts .217
1 tin JSB Knockouts .216
1 tin H&N .217 23 grain
1 box NSA .2165 24.8
1 box NSA .217 24.8
1 box Javelin gen 2 .217 23 grain
1 ZAN .22 sampler pack (see photo)

Say 85.00 shipped for the lot.

hey guys got the acura .22 few weeks ago . very excited, got with box had been opened [RETURN?] , and was flopping around in box un-secure. the owners manual had been taken out of the accesory box, which had been crushed in transit. so loved it ,beautiful ,compact and very sweet looking. perfectly balanced,excellent trigger, and super sweet action.!!!. went to shoot and could not get the mags in as the breech was SUPER TIGHT! had to shove in with about 2-3 lbs of pressure, then push out with same, as they went FLYING!
OK WELL iim thinking they will break in. started to shoot and very 4-5 pellet at 50 yds. throwing about 12- 18 inchs to left. tryed many pellets and have lots of experience, but it ....SUCKED!!! well noticed my shroud was sssuper loose, you could grab and turn with a crunching sound....man i loved it wanted to keep, but $450 ???? to many issues. so contact vendor and they sent return label. waited a week and no money after they received??? went to bank and no deposit or any one "trying". called the VENDOR to see about refund and they said they tryed. i had gotten rid of the card that i purchased it on. they said that was the issue???/ ive gotten many refunds back on cards that id deleted as its ASSOCIATED with the same account.
anyway have bought pellets the last couple days and they took the money off my new debit card. if they can take my money they can RETURN/REFUND ME ON MY NEW DEBIT CARD, as they have no problem taking it! really bummed as i received a defective item and i get DRAMA, NO REFUND, NO CHECK and its been about a month. hopefully they will refund BACK INTO MY ACCOUNT FROM THE BANK THEY TOOK IT FROM!!! thanks guy will keep posted,j PS loved the acura and would love another , IF IT WILL SHOOT WELL!!!!!!

TEXT 680 223 5182
condition perfect operation.possible trade $1150 shipped. Everything as it came from Thermalsales of Oklahoma.




View attachment 518838

So I am looking through a couple of parts boxes and see that there are different numbers on these original Record trigger levers. I can't see anything different between them other than the #s.

Does anyone know the meaning of these #s? Produced on different machines? Subcontractors!

TIA
Al

I just had to rebuild the regulator on my .30 RAW. After I rebuilt it I set the regulator at 145 bar.

In a string of 36 shots the first 9-10 shots are pretty close in the low 900 FPS range. The next 10-12 shots will be in the upper 880 FPS range and the last shots will be back in the lower 900 FPS range again. I end with a standard deviation around 11-12 FPS.

Before the rebuild it would be in 5-8 standard deviation. Accuracy seems pretty good but the velocity swing seems strange to me. Can someone explain it? Do I need to adjust the regulator?

Had a short plinking session with my Pathfinder XR in my backyard today wind at 9 mph with gusts to 21 mph. Simply amazed at the hits and near misses on wine corks cut in half. Shooting at 25, 40 and 50 yards. Connecting while holding over and holding off for wind is satisfying. The near misses teach me something, if I can see the pellet crossing the line of sight or the impact point. After that I was watching a little of the movie “Olympus Has Fallen”. Which inspired me to pull out my Atomic with the red dot sight and front monopod. Set up a tombstone shaped target at 25 yards and a tennis ball. And engaged the target action style like in my 3 gun competition days. Tombstone down and hits on the tennis ball from 25 to 40 yards, shots standing and taking a knee. Da friggin Atomic is sweet, but so is the Pathfinder and my Ghost Carbine? Safe Queen at the moment…

So a couple days ago my new AEA challenger bullpup .25 from Fox Air Power arrived, packaged good, on time ,inspected and tested with inspection sheet and air still in it, so thank you fox for that.
I just dialed in my scope using h&n baracuda 30gr and at around 50yrd it was shooting great, then i switched to Baracuda hunter extreme 28gr and those shot good too. So far a good experience except for hand pumping because i dont have electric yet. What a workout, a break was needed.

Looking for a 75yd and under 22 cal that is capable of shooting light weight slugs ver accurately. Now I’m not looking for super power, I’m just looking for the flatter trajectory of a slug over a pellet without worrying about it being minute of squirrel. I know the vets are heavy, but I’ve heard the new ones do well with slugs, and they are much cheaper than most slug options.

Not much of a pistol guy, unless they're converted to carbine lol.

I had a bunch of parts laying around and decided to come up with this.

Pcp, running 550 fps on a 2000 psi fill and current spring. Have some better springs coming for it, hopefully break into the 600s with this 10" barrel. I've seen north of 20 fpe with this barrel, so shouldn't be too hard to achieve my goals.

Getting plenty of shots off the 100cc tube, and pretty quiet thanks to the shortened Prod shroud and air stripper. No baffles needed for now.

Trigger could be better since it's a single stage, but it's as light as I can get it. Maybe put a Prod trigger group on it some day if it proves worthy.

Drilled and tapped the breech for the metal iron sights I stole of a gun I can't even remember, as well as the front sight tapped to the shroud.

So far I'm holding quarter sized groups at 20 feet, so hopefully I will achieve my goal of squirrel hunting soon.

Maybe a nice set of zebrawood target grips to finish off? Need to repaint the grip frame too.

I haven't taken a poll but I would bet that most of us have, and have had many other hobbies. When I was a kid I loved reading about WW1 and WW2 because my Dad and Grandpa served in these wars. Airplanes, jets, rockets/Mercury, Apollo etc.. Model building, kite building, model rocket building, and I could many more that just burned out. But the one I stuck with was Airguns. This started in the 70's... As I said i'm sure others have had this many and many more but I'd like to hear about them as hobbies have always been a way to calm my ADHD. Go!

Hello,

Looking to sell my Dreamlite .22 set up. Which is to include the rifle itself (which is tuned to shoot 850-860 with JSB 18s)
Plus -

Aztec Emerald 5.5 - 25 x 50 FFP (Gen. 2)
Atlas Bipod
Saber Tactical Bottle Clamp
Saber Tactical Bag Rider
CF Barrel Liner Sleeve
Donny Fl Tatsu
5 Magazines (1 FX 4 CARM)
Case it is in
Also included but not pictured is another Butt Stock (also has a bag rider but no weights)

I am asking $1200 shipped via USPS, payment via PayPal F&F / GS add 4%. Please reach out if there are any questions. Willing to negotiate price, but looking to sell as a complete set up.

Thank you

I have a question for you all. How can you know if the air rifle you purchase from a dealer is new or if it was a returned item that's being sold as new? Is there a way to know or is it just based on what the dealer says?

Weihrauch HW35 .177 With Nikko Stirling GameKing scope 3.5-10x44 with 1pc high rings. Except for the buggered screw at the front of the stock the rifle is in excellent++ condition & works great. Shooting JSB 7.33 @ about 11FPE and JSB 8.44s at 12FPE. Includes manual & front sight inserts. Pictures of targets w/ 5-shot groups added on 12-12-24 $335 shipped to where legal in the lower 48 states US. Preferred payment types are USPS Money Order, bank MO or PayPal F&F.. I would also accept regular paypal + 4%. No trades.

It looks like I may have to invest in a new regulator for my carbon fiber tank. I cant seem to find any, and what I have found I'm not just sure if it will work on my tank.
Looking for some help please.
Thank you

Weihrauch HW30S .177 with Deluxe stock. Includes Leapers UTG Accushot 4-16x44 3omm compact scope with sidewheel & 1Pc UTG hi-mount. EZ-tap illuminated SCP3-UM416AOIEW The rifle is in excellent+ condition. Shooting JSB 7.33 @ a little over 7FPE. $365 shipped to where legal in the lower 48 states US. Preferred payment types are USPS Money Order, bank MO or PayPal F&F.. I would also accept regular paypal + 4%. No trades.