While sitting on my porch feeding squirrels fresh lead sandwiches, I looked down and saw a bolt on the ground. Apparently, the bolt in the trigger guard had fallen out. That gave me a chance to tighten all the visible bolts in the hw97. Does anyone recommend using light lock tight on any of these bolts?
I’ve GOT A SCREW LOOSE
- Thread starter BurneyCA Dennis
- Start date
@BurneyCA Dennis I have a screw loose too. I mean that in a general sense. Did the screw appear to have any Lock Tite on it front the factory? Good question.
Upvote 0
Degrease both male a female threads with lacquer thinner. Use a TINY drop of blue Loctite (pin head) on the male thread. It will not come loose again. Use to much Loctite and it will be difficult to remove the screw.
Upvote 0
KWK is absloutely Korrect! VC-3 is amazing. It is firm but not locking. It is magic for things like triggers that you just want to firm up a bit. It is easy to clean off and won't damage fasteners. I would try to reserve loctite for life of service parts whenever possible.
Upvote 0
