Umarex Ruger Blackhawk .177 break barrel

Is anyone else shooting one of these? If so, I have a few questions.

1. what pellets have you found to be most accurate?
2. have you rescoped it and if so with what?
3. have you tried to quiet it down and if so, what have you done, and what results?
4. what do you use it for, target, or pesting or both?
5. do you have other spring piston rifles, and how does the Ruger Blackhawk compare to them?

Thanks to all that have replies to share.
 
Have a couple, one wood stock one synthetic both .177 cal. They are Chinese made and yes a copy of
the Diana 34 of which I have 3 copies. I picked them up from Flying Dragon and they were an absolute steal,
as I recall 60. each shipped. Great guns are easy to shoot ,accurate and handy.
Have a red dot on one and iron sights on the other. Do they measure up to the Diana 34s ,no they don't have the
fit or finish or great crisp Diana triggers or the level of accuracy. But for the money are great plinkers or pesters.
 
Have a couple, one wood stock one synthetic both .177 cal. They are Chinese made and yes a copy of
the Diana 34 of which I have 3 copies. I picked them up from Flying Dragon and they were an absolute steal,
as I recall 60. each shipped. Great guns are easy to shoot ,accurate and handy.
Have a red dot on one and iron sights on the other. Do they measure up to the Diana 34s ,no they don't have the
fit or finish or great crisp Diana triggers or the level of accuracy. But for the money are great plinkers or pesters.
Thanks for that information, I will keep checking on Flying Dragon for deals.
 
I had 1, it was junk. I gave it the benefit of the doubt, and tore it down for a tune. New seals, spring, guide and debur. Stil would not get better than coke can accuracy at 15 yards. Checked barrel, recrowned, and still junk. Threw it in the garbage.
I shoot targets at 67 feet, close to 22 yards. Hitting a 3-inch bullseye from a homemade bag rest, with the 4x scope that came with it. Averaging 3 out of 5 in that 3-inch bullseye, the misses I attribute to the pellets (Crossman domed 10.5 gr.) Thus, my question what pellets you are using? I know this springer is not top of the line, but I would not consider it junk. You should have passed it on to someone less fortunate not thrown into the trash, Imho. Thank you for your response.
 
I shoot targets at 67 feet, close to 22 yards. Hitting a 3-inch bullseye from a homemade bag rest, with the 4x scope that came with it. Averaging 3 out of 5 in that 3-inch bullseye, the misses I attribute to the pellets (Crossman domed 10.5 gr.) Thus, my question what pellets you are using? I know this springer is not top of the line, but I would not consider it junk. You should have passed it on to someone less fortunate not thrown into the trash, Imho. Thank you for your response.
3 inches at 22 yards is still not acceptable. I was trying to prep it for a "basic break barrel class" in field target. Only 1 shooter showed up, and he won the class with 6 hits out of 60 shots.

I tried every pellet I have from crosman, jsb, and H+N. I feel someone less fortunate would deserve better than that. They don't need more frustration.
 
3 inches at 22 yards is still not acceptable. I was trying to prep it for a "basic break barrel class" in field target. Only 1 shooter showed up, and he won the class with 6 hits out of 60 shots.

I tried every pellet I have from crosman, jsb, and H+N. I feel someone less fortunate would deserve better than that. They don't need more frustration.
You really busted my bubble. I thought I was doing fairly well. Guess not
 
You really busted my bubble. I thought I was doing fairly well. Guess not
As the old saying goes “once bitten, twice shy”. Hopefully this experience doesnt put too much of a damper on things. Airguns can sometimes be a real exercise in frustration. At least you don’t have too much money wrapped up in it.
 
Results vary from gun to gun and more so on cheap ones. It's a fact of life if you will.
My pair will do 3/4 inch groups at 20 yrds.
With pellets they like ,usually cheap Crosmans.

Not everyone is competing or even cares about that world. Most entry level buyers are looking for backyard plinkers and occasional pest shooting.
I have a fair pile of "higher end " European guns to include legit older 10 meter rifles. But trying to hold a Chinese import to them is like comparing a Ferrari to a Subaru.
Completely different ends of the spectrum.
There is plenty of room for budget guns in my collection at least.
 
As the old saying goes “once bitten, twice shy”. Hopefully this experience doesnt put too much of a damper on things. Airguns can sometimes be a real exercise in frustration. At least you don’t have too much money wrapped up in it.
As you quoted "once bitten twice shy" which I fully understand. Hence my username. It didn't put a damper on my day. Matter of fact it encouraged me to try a bit harder. I went out and shot 12 shots at my home-made target, before it started raining. I use cardboard cut from cereal boxes and stick a 3-inch circle on it to aim at. Well out of that 12, 10 were in that 3-inch circle. Pretty good for me! Shooting a junk rifle as some have said about my Blackhawk. Maybe someday I will be able to move up to a higher class of rifle.
Thanks for your reply

Twiceshy
 
  • Like
Reactions: Silver Ace
Results vary from gun to gun and more so on cheap ones. It's a fact of life if you will.
My pair will do 3/4 inch groups at 20 yrds.
With pellets they like ,usually cheap Crosmans.

Not everyone is competing or even cares about that world. Most entry level buyers are looking for backyard plinkers and occasional pest shooting.
I have a fair pile of "higher end " European guns to include legit older 10 meter rifles. But trying to hold a Chinese import to them is like comparing a Ferrari to a Subaru.
Completely different ends of the spectrum.
There is plenty of room for budget guns in my collection at least.
I don't think I will ever be buying a Ferrari rifle. Perhaps a under lever, I think that is what it is called. Thank you for your reply.
 
  • Like
Reactions: Smithy72