Threads

stateofmisery · Mar 12, 2025

Michael said:
Great idea Mark!

Just think you could really mow them down. Mark

rxtargetssys · Mar 12, 2025

https://www.rxtargetsystems.com
Get a jump on sharpening your skill for field Target and precision shooting. Limited time while supplies last.

Avator · Mar 14, 2025

I have a QB57 with the original hard case in .177.

Max115 · Mar 13, 2025

Contndr35BB said:
Max, hope it settles in for you. I went out this morning & popped a couple HOSPs & starlings each. Took a pigeon down ,but my cat buddy stole it before pictures! G-hogs are out also ,but too far out for airguns of mine.

Thank you. Yes, I think it will sort itself out when the weather gets warmer. Have fun shooting them pests! I am gearing up for the Spring shooting as well.

Ranchibi · Apr 16, 2025

stoti said:
I have used Siriu and then Artcise, they're good quality and inexpensive. I then switched to Leofoto... Even better quality and many great designs for shooters. I'd get a Leofoto. They have something for every budget, are absolutely rock solid, function smoothly and intuitively, are lightweight, durable and beautiful. They often go on sale for huge discounts.

If you decide to go this route, you can also use this code for a 15% discount.

Leofoto Outdoors Official Store

Leofoto Outdoors is the official U.S. site for Leofoto Sport Optics & Rifle products. Proudly based in New Orleans, we provide full U.S.-based support.

leofotorifle.com

I use the LS223 with extra large, pivoting feet for tabletop stuff, the LM403c when I have to carry it around or the inverted S0-362c for plain old ease of use and repeatable settings. I also prefer the MH60 inverted ball head most of the time. The ones I use are admittedly a little pricey but there is something for every budget. You will not be disappointed! Check them out!

Have a good one!
Stoti

Shown is the SO-362 and MH-60 inverted ballhead. It's not then best picture but at lease shows the inverted design of both the tripod and ballhead.

View attachment 555944

Wonderful set up Stoti! Glad to see you back....

manabeknives · Mar 12, 2025

unfortunately, they haven't had them stocked for a few months in a .22

jkingrph · Mar 18, 2025

wpvince said:
Wow thanks guys I really appreciate it. Yes I agree my
HW 55T will always be my favorite since I grew up with one similar to it. My father has a 600 but we never used it bc it was so big and heavy. I’m glad I asked bc the 150 and 300 aren’t much smaller or lighter. I’ve shot the fwb sport but it was loud and recoil was more then I’d like.

I have had the 300s for over 40 years and recently got a 602. Both are heavy but the 602 seems much heavier and is much harder to cock. I just got a forearm riser that fits the rail on either so if I want to use on my benchrest set up, it will fit and slide in the owl ear bag on my tripod which being older I had gotten for more narrow sporter rifles. I also have a palm rest so I can hold the rifle in an offhand position, with my left elbow propped on my left hip and the palm rest will reach down to my hand, making for a more steady hold. It has been so windy for the last ten days or so, that I have not had much chance to shoot.

Aslap · Mar 12, 2025

Thammer,

Thanks! That rear stock is an Ace/dDoublestar that I’ve had on different builds for years. The length is perfect for me. I can’t handle the rattling around on the M4 type adjustable stocks. The two I have are both screwed down tight where I need them. I made the rear bag rider.

The rest is a PQP lite model. Kind of almost cheating because the gun is sitting in an artillery cradle. The rimfire rifle has a 0.75 ounce trigger so I get things all lined up and then wait for right condition to touch off the shot. No other part of me is on the rifle But my trigger finger. You’d think that every shot would then be an X but noooooo!…..not that easy.

I really like the Saber Tactical stock. To me, the AV tactical stock with the tube looks clunky and the ST really streamlines the look.

I’ll post the results of the range time tomorrow. Should be essentially as close to a windless day as you can get.

Tony

Harry007 · Mar 19, 2025

M3 is great.

Red_Ryder · May 24, 2025

tibor said:
nice post ,congrats.
take a picture of the RP share with us.

Here's a few I took this morning on the bench...

L.Leon · Apr 5, 2025

drb3224 said:
Feinwerk - thanks for your post. Gave me better understanding of how to use mildot reticles!

@Feinwerk your post explained it clearly… Thank you… heck I copied it and saved it to my notes…

TonyP · Mar 12, 2025

SpindleB said:
At the pic rail or somewhere else? If else a picture or two would help.
Picatinny to ARCA are easy, several available on Amazon.
Arca clamps too for guns with either no rail or the rail is too far forward.

I have this one, but the knob is too close to my QD adapter. On Amazon.

Amazon.com

I bought this on AliExpress. Better spacing. Like it much better.

https://a.aliexpress.com/_mMJAqA3

I am ref the pic rail under the bottle. I was hoping someone made a full arka rail the length of the bottle. Thank you. i will check those out

bigHUN · Mar 22, 2025

I upgraded with larger flow aquarium pump

Also, I don't know the "GX-E CS4-I" but if you can replace to larger barb fittings for better=higher flow. This what I did with my YH.

Cicretsqrl · Jun 28, 2025

I have an Origin as well. I have removed the EPT plug, added a regulator, added a carbon fiber shroud, and a barrel tensioner. Mine likes CPHP 14.3s, JTS 18.1, Rifle brand 16.67, and 19.9. Reg set at 1900psi and HS changes depending on the pellet I am shooting to get about 880fps. Very accurate and I am getting over 40 shots from a 3650 fill. I have 4 mags so when I stop to refill the mags I refill the air tube too. Photo of my barrel tensioning system and CF shroud with a CF moderator. The barrel has been threaded and an aluminum nut made. It pulls the barrel forward while pushing back on the CF shroud. Makes a very stiff and rigid barrel, shroud system. The not a fill port is now the fill port as the regulator causes the need to fill from the other end as the standard fill port is in the plenum area now.

Centercut · Apr 23, 2025

Airfuture said:
Zan Projectiles ELR Hyper Line Slugs .22 Cal, 42.3gr, 200ct | Pyramyd AIR

Stock up on Zan Projectiles ELR Hyper Line Slugs .22 Cal, 42.3gr, 200ct at Pyramyd and get the best price for your next outdoor adventure!

www.pyramydair.com

Not in stock. Can pre-order

esd02 · Mar 20, 2025

Utah suggested the low vel on first shot and higher velo spread on strings was the G1 regulator on that gun wasnt the best. I bought a Huma G3 reg to try. Hope its worth the price of admission and they arent selling me wolf tix.

rodjava · Mar 30, 2025

Yes, it's the 1:24 twist. I have no other choice to choose the right slug for long range.

SpindleB · Mar 12, 2025

Gerry52 said:
"Maybe the best FX ever made.
Bobcat, Boss, Royale"
@SpindleB, those are the only 3 guns I own, or for that matter, care to own! This wasn't by planning on my part but just the way things worked out. I'm always grateful it worked out that way. Years down the road their simplicity, reliability & ACCURACY always brings a smile to my face as they did on day one straight out of the box! For anyone looking for a Royale "tstrever" has a gazillion guns on classifieds with a Royale among them!View attachment 546521

I saw that but wasn't it .177
He had a Monsoon in .22

Devink · Mar 11, 2025

Here is a shotstring with the .51 megalodon "22 inch barrel. Using light hollow point slugs. It's also does well with heavier like 350 grains for more fpe.

.

Airgunmann · Mar 14, 2025

My Texan with a 400 gr will do what ever I want to within 50 to 75 yards what do you need 1200 fps for

Bayward · May 14, 2025

Norcal said:
don't understand why some are seeing positive results and others not.

I need to do more testing to be certain, but I think my water temperature went up after the rotate mod. Might have gone up by almost 10 degrees. Like I said though, I need do a few more cycles with it to be certain. Before the mod after one and only one check on a brand new machine I was in the high 90's. After the rotate the water temp was in the 107~108 range, again after only one cycle.

Airgun-hobbyist · Mar 12, 2025

@jwrabbit123 Good to read that you got it sorted out. I'd surmise that this is why Western is going to all Sub-MOA machined barrels now. To be fair to AoA, in their defense, some types of moisture corrosion can build quickly and harden if left sitting so it may have been working fairly correctly when sold.

SpreadLead · Mar 23, 2025

Taipan is the Miata of the airgun world.

Hopefully the Slash continues that legacy.

I get frustrated when I'm shooting and something malfunctions, but I also really enjoy working on my guns. It's a balance in my head. If you don't like to work on/maintain your guns, maybe a Skout isn't the right one for you. They are constantly developing a solution to all problems, and they will get you the parts at no cost. The customer service from Skout is the best I've had in ANY industry.

marflow 777 · Jul 2, 2025

Replacement Belt for the Umarex Walter PPQ M2 Pellet Magazine - BELT ONLY - Bagnall and Kirkwood Airgun Spares

Replacement belt for the Walther PPQ M2 .177 pellet air pistol by Umarex. Newer improved white type – also direct replacement for earlier black ones.

spares.bagnallandkirkwood.co.uk

baranjhn · Mar 11, 2025

Did a little field target work with my FWB 300 today and it was a blast! I modified class 4 German Field Target rules into a quasi-hunter class. The max kz was 1.5” on the rat target set at 35 yards, the smallest was 3/8” on the bear at 10 yards. The scope is an Optisan 3-12x32 which is a fantastic scope.

Threads

Threads

Filter