Allengja said:

I have a Beeman Hurricane (Webley & Scott) that I purchased many years ago and only used it for Target Practice. I pulled it out this week and it will not cock. Could some one tell me what the issue might be, and how I can get it repaired?

Click to expand...

Can be one of 3 reasons. Most common is the trigger lightening adjustment screw has gone too far to the far margin and not holding sear. If you can draw your barrel back but it's not holding this is the reason and the simplest first step. Simply adjust the trigger adjustment screw back a turn until latching is made.
If your barrel is not moving, I.e jammed, or only partially moving, it can be a worn linkage, or broken mainspring.
Both very easy fixes and parts readily available to order.

This listing has been renewed

If I was good at guessing, I would be in Vegas, not here with you.

The yote came back again and chewed off about 1" of the spout. I found this hunter's video that said a non-head shot usually has them running up to 60 yard. Non-starter for me, don't want to search for it and never want it running off my property. So only brain shots would be tried. Therefore not much difference between a 60 fpe .25 and a 200 fpe .357. Once you crack the skull and lodge the pellet inside the brain any extra power will not make much difference.
Saves me the big $$$ buying a Mora.

Dunk1302 said:

Interesting..... what do you put in the box as a backstop? I'm using sections of radial tyres at the moment.

Also, what chrono do you use? I find the FX pocket v2 often fails to register over such a short distance (I'm guessing the doppler radar doesn't have enough shot-time), so I recently swapped to an old-school LMBR light-based chrono

Dunk

Click to expand...

That’s is bags of rubber mulch inside the box. I know with 1000 fps at that range still doesn't even go half way through with .22. And that’s the original fx pocket or mini or whatever and honestly they are very finicky but if you have it dead even with your barrel it will maybe miss 3 out of 150 shots.

imtrigerhapy said:

I would love to have a case set up like that and i think the reason i do not is my 2 pew pews stay sitting locked and loaded on my office bench looking out toward my shooting range. But looks good

Click to expand...

Thank ya sir

thammer said:

And when the barrels arrive back I'm gong to do an unedited video of opening the package, mounting the barrels and test shooting both at 50 yards to verify whether they were defective or not. I don't mind being wrong. If they shoot like s#it they shoot like s#it.

Click to expand...

Know you are busy but would like to see your results.


John

Stay away from the current .22 barrels and you will be fine.


John

What's wrong with the site you've already had it listed on?


John

Ultralight said:

My guess is that you can get custom shorties to almost any reasonable lengths you may desire. I'm just waiting for someone to get a micro unit that can only produce half a dozen shots at maybe 25 ft-lbs.

Or someone to keep the stock tube length but cut the barrel and shroud down so that the moderator terminates to the same edge as the airtube.

Click to expand...

This is EXACTLY what I've been thinking of for a while. Not that I have the budget for this but this is intriguing to me.

OldVet said:

It's AirVenturi no Umarex.
I like being able to adjust a regulator , and I wonder what this one can be turned up to. I only punch paper , but like power also. I mean who wants to count to 3 before the pellet hits.
I wounder what the cc of the tube is , or if it's removable , so I can put a little bottle on there for more shots. I already got a mod for it I have never seen on any air gun. I love it. Honestly can't wait. Well done AirVenturi.

Click to expand...

80cc Tube. But you can change barrels between .177, .22 and .25. Not sure that matters if you can only shoot 5, 4 & 3 rounds respectively. Just kidding don't really know the output specs.

Bramezy said:

why more power? For what use? It looks like their take on a notos style gun and id hope they are priced below it if they want to compete at all. For $189 a Notos is about impossible to beat but its limited to .22 only. Neat they did 177 and 25 as well. Options. Power is over rated. Guess it depends on your use.

Click to expand...

Hey Man, try double that to 399.00. At that price not sure it is a notos killer. However, it is a very neat looking pcp and may be going for a different end user.

Caleb2424 said:

A picture of my set up for tuning

Click to expand...

Interesting..... what do you put in the box as a backstop? I'm using sections of radial tyres at the moment.

Also, what chrono do you use? I find the FX pocket v2 often fails to register over such a short distance (I'm guessing the doppler radar doesn't have enough shot-time), so I recently swapped to an old-school LMBR light-based chrono

Dunk

Cornwall, England. Been shooting for almost eighty years but cataracts have forced me to give up.
Luckily I'm having surgery in a months time, so hope to be back on the range before Christmas.

This listing has been renewed

Ries said:

Not really, you should check with Utah Airguns.

Click to expand...

The issue is fixed. You are right, this hammer is a little heavier than the OEM one. I just simply turned the hammer spring down to level 1, and now the rifle is shooting about 810 fps, and 4-5 mag per fill with normal noise level. Thank you so much.

Ranchibi said:

The Taipan Veteran 2 Tactical 550mm .22 I purchased from Dillon is just so accurate, quiet, sublime cocking and with a fabulous light crispy trigger pull, reminds me of my RAW HMx but in bullpup form. It's also more efficient with air than my RAW, both shoot pellets and slugs very accurately.

Click to expand...

I have the 700mm in 25cal....love that gun.... thinking really hard about getting one in 550!!!

iFish said:

Did you run it AC or DC via the Ecoflow?

Click to expand...

I ran it via AC, which I'm aware is less efficient due to converting from DC to AC and back again. I'm not super familiar with EcoFlow's competitors, but none of the smaller EcoFlows have sufficient DC output interfaces for the compressor.

I'd need to re-run my wattage test of the compressor but I believe it was drawing around 450W under load and 40W with just the cooling fans on.

Liontracks said:

Another gun I am looking at is the RAW Micro. It looks very interesting but the reviews are older and I have seen some recent complains about accuracy and consistency.

I was wondering if there are any new owners with recent new purchases and how they experience has been?

Click to expand...

Compare it to the BRK Pathfinder XR… A wickedly solid little PCP. I like the look of the Micro, it looks to be a dandy little rig.

you know a lot of time that is all we have is a guess even if we know the gun well and why is that
well, the poster has not made the question answerable not enough info
it is like calling up and machinic and saying i have a noise can you tell me what it is
and you are right with enough guesses one could be right
i think some of us are just plain bored and need something to do and typing i don't know solves that

it is correct to assume that few people know these pistols and the hardest part is there value and that could be a negative
but on the flip side these are very nice as are the Chameleon 4 and 5 yes i said 5 it is the .22 model 4
the other thing is they are not seen often and anyone want one will jump to get it
now the is a person on GB he wants 1295.00 and he is mad as a hatter
but a good B96 in 100% working order should be a 500.00 pistol
now back to reality you see in my pictures the B96 the poster has is miss a part below the mag port that on mine has a hex screw and his a slotted screw that it beat up
missing parts will cause problems
an yes mine has a Weaver-Picatinny rail mounted it does not affect the sights and in reality, helps you aim down the slot

Motorhead said:

Just under stand short guns such a Bull pups are much harder to be stable with than a long gun ( Typical rifle length ) This due to support distance Shoulder to Fore stock being shorter too.
It can be done successfully with much attention paid to getting rock solid stable in your shooting position & making sure no CANT exists as the taller optics position is far more sensitive to getting it crooked having Cant.

Click to expand...

If this man gives you advice it's the best you'll get. Personal friend/hero in the airgun world. If it's posted from him it's the best advice you'll get! Period!

Revere should make you happy for quite a while.