Cameron Kerndt Takes Gold in Long-Range at Oregon Competition

We’re thrilled to announce that AirForce & RAW team shooter Cameron Kerndt secured a Gold Medal this past weekend at the Ashland, Oregon Benchrest, EFT, and Long-Range Shoot.

He delivered an incredible performance in the long-range competition, earning top honors against a strong field. Targets were placed at challenging distances of 140, 167, 187, 249, and 298 yards.

John McCaslin, President and owner of Rapid Air Worx and AirForce Airguns said “More and more shooters are taking advantage of RAW’s ‘out of the box’ accuracy and consistency that provides a great starting point to keep pushing the performance envelope“.

“This RAW is extraordinarily docile and makes power extremely easily,” Cameron shared. “It’s incredibly efficient, quiet, and deadly accurate at distance.”

Cameron’s performance is a true testament to his precision, dedication, and mastery of long-range shooting. We’re proud to have him on the team and can’t wait to see what he achieves next!

Congratulations, Cameron!

Raining all day so dissembling one of my Crowns to tune trigger further.

Is this type of damage typical on Crown hammer in locations where sear catches?

I’m just shooting pellets at modest velocities. I’m not using what would be considered a lot of hammer spring preload.

If typical, disappointing and will make maintaining over time a consistent sear release a challenge.

Thanks,

-Ed

First thing this morning I had three spots Nitrogen frozen on my head (one of which gave me a brain freeze without the ice cream!) and two biopsies taken...

So I decided no yard work today, it was all about my PCPs....

First up was my Revere in .22 Cal. I consider myself anymore a wobbly shooter but that thing knocks the X out time after time. After a couple of fills I started getting puffs of air from out of the stock and my shot velocity dropped off drastically after about 9 shots. I think the o-ring at the transfer port went bad? I did not have a chronograph until recently. After I receive my reseal kit which I just ordered, what should be my factory FPS with JSB Diabolo 18.13Gr pellets? And shot count? Anybody know the factory hammer spring turns?

So, next up was my Avenge-X tactical carbine which I bought a couple of weeks ago. (I only own two PCPs). Things started our great, then I started to get two POIs? Noticed my shroud was slipping forward about 1/8" after each shot. The grub screw on that collar had come loose. No problem, fixed that.

Then the agony of defeat. The three position switch on my Rovair compressor failed. Arg. Almost clicked By Now on Ebay even if it was $19.95. At this point I didn't care. Until I noticed $115 shipping! (Found one on Amazon for $3.95 that will be here tomorrow.)

And I got into PCPs because I didn't want to spend $200 on a PB silencer tax stamp.

No worries, after reading up on this forum I knew what I was getting into.

Now I am going to sit out back and have some Blanton's with my buddy.

Used not abused. I take care of my comp gear. Newer Gen 700mm Fx Panthera with updated valve and seat. Sabertactical front rail, Sabertactical brass top weight, MDT Elite grip, Airmarksmen 300bar bottle and valve, Custom Brass cocking handle, Custom bag rider "bagrider is a bit loose but works fine. Rifle is tuned for H&N 34 grain .218 for 1020fps and its a lazerbeam. I have hit targets out to 450 yards with the rifle. Anything with in 200 yards is child's play if you do your part. Custom Pantera Sticker on the block adds 100 fps that's B.S don't take me to seriously. Rifle has 5 or 6 mags with it as well

I also have factory front rail it will go with the rifle.

I will no longer be using the rifle in competitions as that was the rifles Job.

Scope,bipod, muzzle break not going with it.
Well no one seems to have a decent trade so here goes the sale. Im not giving it away but im more then willing to negotiate with you. Low ball offers will be ignored.

1950.00 shipped to your door

The only gun im interested in trading for a is a vulcan V3 25 caliber in Talon tunes chassis

Another free shipping deal from Utah Airguns - until midnight tonight.

Purchased new from TT early this year (25)
This is yet another airgun that likely won't make it to the range as my range is half an hour away.
Add a job layoff and I have to knock the ones down that will be safe queens.
Here is my 3 month old Uragan II .25. Beautiful red laminate example.
It's set up to shoot 37 grain Zan .250's at 880 fps but I won't know how they work because It won't get to the range.
It also shoots knockouts over the chrono at 930 fps as well.
You will see some dust in some of the photos on the finish.

Everything works well, ES is very good and holds air like it should.
Comes in AGT bag with all the AGT things that came with it.

The upgrades,

Eagle Vision 1/2 unf muzzle adapter.
1 Extra magazine.
Aluminum bottle cage with aluminum bottom rail as well as picatinny to m-lok mount. (all very solid )
Outgun 25mm digital Re-Chargeable gauge with outgun offset gauge mount and charging cable.

So about $500 in upgrades but I'm not going to ask for what I put into it like it's new even though it's never been to the range.

I have about $1725 into give or take and am wanting $1375 shipped insured to lower 48 only.
Ships same or next day.

Paypal please and ff not needed.
Good seller rating.

Mine has gone like this (all in .22):

Hatsan AT-44 QE
Hatsan Flashpup Synthetic
Hatsan Vectis
FX Maverick Sniper
KalibrGun Cricket 2 Tactical
Huben K1

Looking forward to reading about your journeys!

Looking to sell the Following
.45 Evanix Ibex $1000
.495 Evanix Ibex $1000
These are new in the box with manuals and muzzle brakes. These are single load unregulated big bore rifles with 250 bar carbonfiber tanks. Will accept Venmo or paypal. Will ship US continental. Buyer pays half of shipping. Will accept resonable offers. PM for venmo or paypal info and more information.

Finaly got it after 2 days stuck in the transport.
And what a faboulus looking thing
( Grs green Mountain camo).
It is heavy And feels realy solid.
The reg had had i bit og creep cuz it was showing 125bar when I opend the box but after first shot it went down to 115 And stayed there. Dont know if it needs to settle in?
And i tried 25 And 34gr pellets, 26,5gr 33gr And 37gr slug And the 26,5gr slug was the only slug/pellets that were in the "area" it should be (975), the pellets where 990 And 1060 so guess its not tuned for that out of the box xD

The only thing i have to put my finger on is that on fx site it says regulator is externaly adjustable but its not at all with the king since the stock is in the way, im realy tempted to just drill my own hole so I dont have to take it off to adjust.

Record whitetail buck taken with an Airforce Texan SS big bore airgun

Hello All,
I'm shopping for my first rifle. I'm very interested in the sport of it but mostly my needs are predator control for my chicken coop.
I really hope to keep this first purchase less than $400. I know that's peanuts but I'm hopeful. I've settled on a PCP in 25 caliber and was lucky to already find a brand new Spritech pump on an overstock site.
I'm looking at the Hatsan Flashpup 25 and the Beeman Bullpup 25. I much prefer the Bullpup design but also considering Air Venturi Avenger 25.
I'm hopeful one like this will meet my needs on a budget. Any advice would really be appreciated. I'm a bit overwhelmed being so green.
Thank you

Did Arken change there name? I have two of there EPL4 scopes and am very impressed with them,,, But dont see them around?
Mike

Regret selling one of my Huben GK[ ,So looking around and the HW44 keeps popping up, But then I got wind of a 22 caliber Tequila shorty,, Well that put the fire out of the HW44,
So in about two weeks , I will test it out against , GKl 25 shorty, 22 caliber PP750 &, PP 700, 22 reximex rp , Ill put the two Notos up against them just for grins , I got one building - Like money don't matter, And my next one bone stock, except for the trigger and I am going to keep it that way.

My HW100 got a leak and Im going to replace some orings for it.
Do I able to remove the air tube with air in it?
Thanks.

Well, yes as one can see, but I also use them now and then when the PCP boredom creeps in.....

Nice optices also has an adjustable AO...mine maybe an older model becaose the AO is not side mounted.

Vintage crosman power master 760 pump action repeater rifle, wood forearm, styrene stock. Everything is there and in great condition. Dated 1-5 (January 75). Last of the original design type. Pumps/shoots fine, but i have 3 of these and cant really use them all and this one is used the least. I recently replaced all seals. Kept in a rifle bag (not included). Some wear from usage, but in great condition for its age. If it sells i will remove the stock for shipping. Will ship within the lower 48. More pics upon request. Asking $150, plus shipping

I know nothing about electrical…
I have an Alkin W31 Mariner 3hp 220v 16.6 amp compressor. I am finishing my basement as I am writing this and would like to know if I should use a 30 amp with a L6-30P/L630R 250v or a 20 amp with a Nema 6-20R 250v plug. Not sure what I just wrote, but I basically want to know if a 20 or 30 amp is better for the motor. I understand that I take 125% of the amps to decide, but based on 16.6 amps it puts me a little over 20 amps, so should I therefore use 30 amps? What do you use? Obviously, I will hire an electrician to install, but I want to have a little knowledge to make my decision before-hand. One last thing…which AWG (wire) should I use with each? 10 gauge for 30 amp and 12 gauge for 20 amp? I apologize of my ignorance!!! Appreciate any help!

This video introduces the new STUD DRS Magazine, Feeder, and Loader system, purpose-built to address the long-standing challenges associated with loading FX DRS magazines. Developed in direct response to feedback from the airgun community, this innovative system offers a streamlined, user-friendly solution for FX DRS owners. The video provides a detailed look at how the system works and highlights its benefits for airgun enthusiasts seeking a deep dive into why this system was developed and how we engineered it.

Key features showcased in the video include:

• Complete Loading Solution: The system comprises a magazine, feeder, and four loaders, designed to work seamlessly together.
• Enhanced Compatibility: Supports 22, 25 and .30 calibers.
• User-Friendly Design: Features like a magnetic lid and visual "shots remaining" indicator enhance usability even for those with finger mobility challenges
• Smooth Operation: Incorporates a class 2RS roller bearing for reliable feeding of pellets or slugs.

For a comprehensive overview of the STUD DRS Magazine, Feeder, and Loader system, watch the video here:

Hi everyone. A few days ago, I purchased a HUMA regulator tester to check the pressure setting of the regulator in my RAW HM1000X. This rifle does not have a gauge to determine that pressure.


To my surprise, even though the HUMA website states that the RAW HM1000X regulator is compatible, it does not fit into the tester block. I also bought the HUMA 1174 regulator, and it doesn’t fit the block either.


Since my rifle is new and does not have a port to connect an external gauge, is there any way to calibrate or check the pressure of RAW HM1000X regulators? I’d appreciate it if you could share product links if available. Thanks.

Well after not owning a air rifle for over 50 years I have jumped in the deep end and purchase not only an air rifle but a PCP and having nothing to do with them I have a few things to learn but I like that and after shooting most of my life and enjoying long range stuff mostly I'am looking to pushing the rifle to my limits after I work out how they work.

If you feel strongly about how newbies post on this forum or if the classifieds annoy you in some small way, you just may be a curmudgeon....

Hi everybody,
my AGT VULCAN 3 HP sprung a leak, after degassing and while refilling.
air slowly, but audibly escapes from one of a little boreholes on the plenum tube.
there are three boreholes, the leaking one is on the height of the regulator, the one in the middle.

has anybody a clue what could cause it? if so please let me know.
btw, i have not yet managed to pull out the regulator, as i have been a bit shy with using a lot of force.
it certainly does not come out as easy as i have seen in some instruction videos.

thank you.