I broke the pellet probe on my Benjamin Marauder .177. Called Crossman and they didn’t have any replacement parts because the gun is a “generation 1”?? I think that was the reason, too old is what he meant, they didn’t have any regardless…

It still fires but I haven’t chronographed it yet to see if the velocity is still where it was. If it is, I don’t think I’ll bother fixing it.

The only way I think it could be repaired would be to drill a hole where the probe broke off and insert a pin in the hole. I’d use some epoxy in the hole to keep it in there. It appeared to be made of powdered metal so It shouldn’t be hard to drill, just have be really careful. Pretty sure I’d need to get this in a lathe so it’s aligned properly. It would be impossible to get it lined up to drill on my drill press and there’s too much play in the dp to do it accurately.

Anybody have any thoughts on this or maybe a source I don’t know about for a replacement bolt?

Even though I have purchased most of my airguns from the terrific domestic suppliers, every once in a while, Krale will have a rifle not stocked by AOA, PA, or the other “typical” airgun houses.

Heretofore, I have had unbelievable Krale/UPS service as their rifles typically arrive within three days of order.

I needed another winter “tuning project” so on January 16th I ordered a Weihrauch 77 long in .22. It was released on the 17th to UPS. Below you can see the tracking where it went to Louisville, Ky - only 180 miles from where I live in Indiana, then went back to the east coast, then “cleared” customs on the 20th, but remains in a warehouse on the east coast with no movement since the 20th. I have no idea why it would go the the center of the US and close to the final destination and then be sent 1000 miles away.

I called both UPS international and Krale today and both parties claim there is nothing they can do about it and I just have to be patient until it arrives someday.

This will be my last experience purchasing from overseas as I don’t like having a contract to purchase from someone who can’t control the delivery outcomes.

I am certain Krale is very reputable but the variable of the US Customs Service and having to have it shipped all over poses not only the potential for a lost shipment but exponentially greater opportunities for shipment damage as well.

Slug collection expansion needed.
I have 1 tin of .22 slugs in 40 grain. About 75% through that tin
Want to see what you all use.
Obviously been looking around and will try a few different tins; so post your faves AND not so faves

was wondering about the brand, how clear and overall are you satisfied with them. was looking at their compact scopes.

TALON TUNES AIRFORCE CONDOR SS .25

For sales is an absolute mint condition Talon Tunes Airforce Condor SS in .25 caliber. Purchased directly from Tony in September 2018. This gun shoots lights out and packs a hard punch.

Shooting JSB Match Diablo EXACT KING .25 (25.39 grains) it averages about 876lbs for about 50 shots.

Tony performed the following on the gun:

• Two set screws are installed and adjusted for the trigger to precisely control the first stage of Travel, and the amount of overtravel. This takes the trigger from the Factory’s stiff pull to a crisp and consistent pull for improved accuracy, control and feel.
• The breech slide O-Rings are replaced with 90 Durometer o-rings and the breech slide and barrel are mated for smooth operation and a tight seal.
• Barrel is polished where the breech o-rings ride.
• Valve is disassembled, polished and ported for improved operation and air flow.

Also Included:

• AEON Scope: 6-24-50 SF
• TalonTunes Quad Rail
• TalonTunes Tank Adapter
• TalonTunes Custom Grip
• TalonTunes Gen.6 SOS Shroud/Sound Moderator 9 (never used!)
• Airforce Ring-Loc Valve Kit

Check my feedback on eBay as: Fbuck77

I am on numerous other forums: Muzzleloadingforum; AmericanLongRifles.org, Archerytalk.com, TradTalk.com, RimfireCentral.com etc.. as RANGER94

I live on the PA, DE, NJ border, thus if you are in my area I can meet up with you .

$1,000.00 via Paypal – 3% you pay the fee. Free Shipping

Went out to the usual spot, trying to get bunnies before the 29th. Saw about 5 healthy ones n about 10 lil ones, they didn't stick around for long, they scared easily. Lots of squirrels, they were active since the weather was nice sunny n 60's. Had my range finder, only to find out battery dumped on me. Finally after 2hrs of walking , I nailed this guy at about 20yrds DRT on the spot. The .22 CPHP ripped through his neck doing major damage. All in all it was a great day to get out, get my exercise. Squirrels 3 to 1, hopefully even the score next outing..

withdrawn

So. I have an idea about usability and selection.

I feel that there are overlaps in calibers and capabilities.

For instance.

I don't care for .177. but it's still a usable caliber for small game.

177
20
22
25
30
35
45
50.

I know there are more but I feel those are the most popular.

So for "hunting" as paper don't care about damage. I would say a set of 177, 25, 45 would cover a wind range of prey.

As I prefer nothing smaller than 22... I would say 22, 35, 50 would be a solid covering of calibers and you could tune the pellet weight to what ya plan to kill.

What caliber(s) would you guys say for the best selection to cover small to large game?

Coverage from small to large least amount of calibers?

All of these have been in my collection for many years. It’s time to move some iron and wood. For me to own a rifle for years it needs to be pretty darn special. If it’s not it gets sold.

Payment is postal money order, or PayPal friends and family, unless we arrange something different.

The first one who sends me a PM saying I’ll take it, Will be the new owner of one of these very special rifles.

1. Stock for FWB, 124, 127. These haven’t been made for a long time. It’s a Tyrolean from James Maccarri. I picked it up a dozen years ago on the yellow forum. It is finished with hand drubbed True Oil by me, I’m very good. $675 shipped conus.

2. A hand cut, handmade Shyuda stock (spelling?). This was made by a college professor out in Montana. It is absolutely gorgeous, the workmanship is incredible. It will drop right into a pro sport from air arms. It is a stutsen - long stock. $650 shipped conus.

3. Webbly Exocet 22 caliber. The stock was made by James Maccarri, you will never see another like it. It is the most beautiful Birdseye maple I have ever seen, and the workmanship is absolutely impeccable. He also tuned the rifle, and put one of his custom muzzle breaks on. $1275 shipped conus without the scope or rings.

4. Good luck finding another one of these. Sig 177 caliber, hardly shot. Includes the new box. Extremely accurate excellent rifle. I have two. $795.00 shipped conus.

5. Another James Maccarri work of art. This was the exact stock that was on the front page of his website for many years. It is absolutely gorgeous Walnut. The rifle is another Webley Exocet. 22 cal. $1795 shipped conus, scope and rings included.

6. SOLD The most sought after model Walter LGV 22 caliber Woodstock with the cheek piece. Extremely accurate, it will pile them up at 50 yards. $695 shipped bonus.

Please PM me with questions. If you need more pictures of a specific rifle, please send me your cell phone so I can text. Between this site in the yellow forum I’ve been well known in the Airgun community for over 10 years, buy with confidence.

I have no interest in lowball offers, I will not respond to them. And I don’t need any advice on how much my stuff is worth. I seem to get a lot when I place adds here.

Enjoy the pictures if nothing else!

Mike

I bought this to shoot ARA but moved on to a Randolph rest. It comes with the optional case and picatinny mount. It’s like new with a few scratches under the feet. Fully adjustable elevation. New price is $555, asking $450 PP F&F shipped.

No trades or low ball offers. Price is firm.

BACK UP BUYER BACKED OUT
new price too
Ok guys. Safe queen for sale. I acquired this gun a year ago in a big bundle.
Steyr pro x walnut
Set up by John Fry in Colorado
Moderator
Total of 5 magazine
Fill probe
Pellet seater
A high and low scope rail
Factory hard case
Scope not included
This thing shoots and I mean shoots, just like Chrisis review here in agn. Quiet backyard friendly all u really hear is the action. I just don’t shoot it as much(sits in safe since I got my Huben 25cal) so I thought I’d list it for sale
Attached are pics and a chrono pic from today
There is a couple slight dents in the bottom of buttstock and a small nick at end of air tube( a marker would cover it) hope pics show
I know these have lowered In cost some but still hold their value
I don’t know what the guy charged to tune it

$2500 shipped in lower 48 states
Prefer personal check or usps money order but will consider PayPal for an additional 3%
Would consider trades of Leshiy classic 25cal or fx impact 3 in 25 cal/30 cal
or powder burners 308 bolt gun, 30/30 or other lever gun, 1911 and glocks

I am offering my FX Maverick VP in .25. The Maverick is tuned right now for JSB 25.39 King Diabolo pellets.
Current Build:
FX Maverick VP .25 caliber
Saber Tactical butt stock
Saber Tactical Under Bottel Arca Rail with short Picatinny rail
Donny FL Sumo Moderator
Element Helix 6-24x50 SFP scope
Eagle Vision Rings
5 magazines
Pelican 730 vault
I would like to sell this as a complete package, ready to shoot out of the box. Bought new in 2021 I have a little over $3k invested in this setup.
Asking $2100 for the entire package plus Shipping & Insurance by buyer. Local pickup is possible in SE Wisconsin.
Best way to contact me is to text or call 414 -469- one six two six, or email [email protected]

I have several guns and scopes for sale...this pains me but divorce is a hell of a thing!

All these guns are in immaculate condition.

SOLD...I have a Kalibrgun Capybara that has had very little pellets through it. The successor to the Colibri, which i had one of and i can tell you, It is a very quiet, light weight, fun to shoot gun. Very accurate. There aren't many in the states. Gun is in perfect condition. Has had very few pellets through it. Less than a hundred. Comes with extra mag and fill probe. 1250 shipped to the lower 48.



I have a Kalibrgun Cricket 2 with a WSA stock. This is a Charlie Frear special. Barrel was polished and optimized. Insanely accurate. Has an extra mag held in the bottom of the stock. Comes with that, fill probe, and everything Charlie sent with it that came from him and the factory. Has had less than a hundred pellets through it and is in like new condition. 1250 shipped to the lower 48.



SOLD...I have two Uragan's, one in .22 and one in .25. Both are again, Charlie Frear specials. Both had thr barrels polished and optimized. The .22 has had several hundred pellets through it but the .25 has only had a few mags worth of pellets through it to sight it in. Both are phenomenal guns! Both are in like new condition. I'm only going to put one Pic as they literally look identical. Both come with an extra mag, fill probe, everything Charlie sent from him and the factory including an awesome soft case to carry everything. Each one is 1250 shipped to the lower 48.



SOLD...I have a custom Taipan Veteran Long with an FX barrel system designed by a member of this forum I think goes by Mtnghost. I just had this gun completely reworked and resealed. No pics of that one right now but will try to get some today or you can request them.

I have a Wildcat. 25 first generation with a cracked stock and a broken air Guage which I have a replacement for...just haven't gotten around to replacing. Still holds air and still shoots straight but it was dropped. I'll take the first 750 shipped to the lower 48. This will come with the custom mag holders and two extra mags.

Got a Hatsan with a ton of extra stuff including a scope, extra air tank, bunch of mags, etc. I think it's an AT44 but I'll double check that if anyone is interested. I've personally never shot it, bought it used fairly cheap so I'll give a good deal if anyone wants it.

I have 3 Sightron S-TAC 4X20X50 MOA Reticle. I paid over 600 each but I'll let em go for 350 shipped to the lower 48 OBO.

Got several DonnyFL moderators, different styles...one is carbon fiber when Donny first started...insanely quiet. I want 150 for that one shipped.

None of the scopes in the pics come with the guns. Have to purchase those separately.

Pm for more pics or to talk about any of them. Thanks guys...like I said...divorce is a hell of a thing...never thought I'd be dumping my collection.

I hate to do this, but I am offering my Serial # EV0003 prototype Evanix VIPER for sale. The VIPER video is fast on it's way to 1 million views. This may become a collectors item, as the production versions will be different. This is the 3rd VIPER off the line. Here is an opportunity to own a piece of airgun history. This gun is as brand new. It was only shot in the video, and then back in the box. Includes 2 magazines. If it doesn't sell at $1150, I will lower the price each week until it's reaches the retail price ($975). I know it will sell then. If you didn't see the video, this gun is amazingly accurate. It's .22 caliber and semi-auto. 14 round magazines coming soon.

$1150 free shipping. Paypal Goods and Services OK. You can email me at [email protected] or PM me here or call or text me at 360-844-0962

P.S. I haven't told anyone yet, but Evanix's owner asked me what to name this gun and I suggested "VIPER" ...it was almost called the Evanix "DARK" ...???



picture taken before I put air in it.

Quite rare in USA and in very nice condition! New spring and changed the piston seal from a oring piston seal to a 28mm parachute seal. $850 No Paypal. USPS money order (and maybe cheque) Shipping is not included.

Hello AGN community. I have decided to give daystate a chunk of money, and I can’t decide whether the Alpha, or Delta wolf would be the best choice. I am also interested in hearing about other options that actual gun owners might have. Please point out any negative issue you might have had, along with the positives. Thank you in advance for any information provided. I am looking at .177, and usage would be Field Target, IFP, and other club events.

Two match grade triggers for FX Impact M3 are ready to be dispatched to two users in two different countries.

I realised that after manufacturing, the proper adjustment of the triggers also take few hours then I lock tightened them.

I hope these will be plug and play for the users.

Regards,

Umair Bhaur

Respected mates,
I am moving out of my city for seven to eight months. I need to store my Cricket. 25 and Dreamlite. 22 for that period.

Is it OK for the rifles if I keep them with around 70 bar pressure in cylinder for around eight months unused ??

Kindly guide.
Regards

...should say "almost" New in the Box. This is a brand new rifle that was used to film the review video. Only 30 shots down the barrel of this gun.

Well packed and ready to ship. Comes with 4 magazines, bottom pick rail, accessories, O-rings.

$679.00 with free shipping (Donny FL and Scope not included.) Paypal Goods and Services OK. You can email me at [email protected] or PM me here or call or text me at 360-844-0962

I have a saber tactical cheek riser also have a bag rider with both adapters 500 mm carbon fiber liner $80 shipped for all three items PayPal only inbox me for pictures

I’m going to order a .257 Texan to hunt coyotes here in Northern Cali.; most likely going to hunt orchards and foothills. What mods should I do to get the most power, accuracy, and reach in able to drop em’ at 100 yards+ ?

Have a new (30 shots) Mrod F&T that leaked down from 3,000 to 2,500 PSI over 2 days. So far 3 hours into balloon test looks like the gage is the source. Do I need to depressurize before I tighten it?

OFG