Looking to trade for bullpup .22

Great shooter. Shoots cphp pellets and fx atomic pellets well. Has an alteros regulator set to 125 bar. Does have some scuffs and scratches from use but in overall good condition. Comes with 2 mags. Will sell for $1000 obo

Anybody else having internet strong then weak then strong again ? up and down up and down , I have fast cable connect , must be feed ? I'm in south central KY .

Before I get too far down this rabbit hole, I would like to gauge the interest in 3D printed parts. Mostly moderators and simple, multi use items. Specialized things like AG specific mags and such could be possible in the future.

I have both PLA filament printing capabilities as well as resin. I don't prefer PLA due to low melt and high deformation and low tolerances.

So I am primarily planning resin with "ABS-like" properties. Colors are limited but paint is cheap and easy.

This is a hobby to me as I work full time and have a life outside of here, but at the same time if I can score some scratch and save you guys some then we all win.
Here is a barrel band and "moderator" that I made on my Avenger. I don't have a sound meter so can't tell ya the exact reduction numbers but could send one to someone with one and they could review it with facts. The barrel band doesn't have the nuts n bolts yet but is real snug to start with so it should tighten up nicely.


This is a set of gauge covers for the Avenger. I can size it to what ya need if you get me a solid measurement.


I have a few other items in mind to make. Like I said mainly mods and bits but am not scared to take on a new idea. If you are able to send me a CAD/STL/usable file then I can probably get it printed.

So what do you folks think? Worth the try? Or waste of my time?

Mook

Parting ways with all my 177s.

Just finished this gun up a month or 2 ago. Holds air indefinitely. 100 shots on a 4000 psi fill. Currently doing 800 fps with crosman 7.9 premiers.

Has a match grade 1720T barrel
Fully shrouded with air stripper and 8 baffles. Very quiet.
1500 psi regulator
250cc 300BAR bottle
Stainless fluted hammer
Challenger RVA
Disco bolt probe and handle
Stainless roller trigger
Light trigger spring

Smooth, crisp trigger very light

Comes with an almost full 500ct tin of jsb jades 10.34 and 3 750ct benjamin 7.9 hollow points. Basically the same as the crosmans, just more per tin and a little better quality.

Looking to get $300 shipped CONUS
Possibly trade for another rifle or decent scope.

PayPal preferred or PMO

I purchased this awhile back and decided that I like shorter rifles or bullpups. It has been fully customized with a fully shroud barrel which is very effective. The overall length is still factory spec. 47". To install the shroud the bottle was removed and the air tube was installed. It has the FX Boss trigger group installed which breaks light and crisp. It does have the smooth twist barrel. It is setup to shoot Jsb 25gr @905fps and yields 44 regulated shots per fill or 4 magazines. Included is 3 magazines and fill probe. Holds air forever and performs as it should. Side cock lever is butter smooth. Previous owner said it will shoot m.o.a. @ 100yds with sorted pellets but I never shot it over 50yds. The magazines have small cracks in the cover but perform as they should. The stock has a bi-pod plate installed. Asking ( $800) $700 shipped. Accept PayPal.
*Note- Scope and rings are not included.
* No trades *

I have been messing around with variables on the trajectory calculator and questioned how flat of an arc I could get if I wanted to shoot a 1/4" target. I was looking at how long the projectile would stay in that 1/4" zone. I used a +/- variance of 1/8". For my application I used a Diana Chaser .177 CO2 powered pellet pistol at 630FPS muzzle velocity, my calculations were 14+ yards. In that zone, the equipment would be able to hit a fly anywhere along that 14+ yard range. I may not have the skills, but the equipment could do the job. Are there any flaws in my thought process?

Golf ball 150 yards

I’m not into the big bore air guns really but I noticed this in the new catalog and I know some of you guys like the Benjamin Bulldog so I thought I’d point out that it’s going to be available in .257 now.
So what’s your guys thoughts on this? Is Benjamin too late to the party with this one?

Gentleman, Are any of you guys experiencing any air loss between shoot sessions ?

I believe I’ve seen a drop of only 200-250 over the course of 6 days

I didn’t just fill it and store it ( as the filling heats up tube raises pressure ) shot it … stored it at 2900 and came back to 2700 in 5-6 days


Anyone seeing any of that ?

.

Vid soren drost did with the ghost hp 177

This rifle was bought for a collection and has not been used (with the exception of 40-50 test shots). Mint condition! Everything what you see on a pic is included! $1250 shipped/ PP. Hurry up guys!

Looking for a used caiman x in. .22 cal. I know Utah has them on sale , but I would prefer a nice used one. Message pictures and price shipped PayPal. Thanks

I bought a Crosman 1377 a number of years back then added the Crosman rifle stock. It's an accurate little bugger.
I pumped 3 times for each of these shots at roughly 5 yards if I recall correctly. The muzzle is pointing at the 3 landed shots.

Although it really aggravates me while I'm typing it does show how poorly I've been mis-spelling words, using incorrect grammar and improper sentence building.
Sure makes me proofread a little more often, so thanks to the forum..

I have a .22 cal Wildcat 1st gen for sale. The gun is in very good condition. New Power Plenum installed, regulator gauge installed. This gun will come with everything you see here but scope and night vision, will also have a tin of 15.89 JSB pellets. 800.00 shipped or best offer. Shipping CONUS only. local pick up ok.. Zelle, PayPal are accepted.



View attachment 334580

What an awesome start of a day. This is my day to jam everything into one day. First off I go the post office which is 20 miles away. I feel like I‘m going to see Sam Drucker in Hootersville to get my mail. Anyway, I get my parsels and lo and behold I got my order from Chambers in the UK. I ordered over two months ago. Bottom line it’s in my hands now. Just spare parts mostly foe the Weihrauch’s. Next stop is the bank. I’ve been trying to wire finances to Vortek for almost 3 weeks. This is my 3rd attempt at bank. I could use several adjectives before the word bank, I’m holding back. I was assured it went through. Ordered a boat load of piston seals from Tom.
AGS was good for 10 tins JBL’s .177.
‘And last I go to my buddies fab plant. Last week when I stopped in he was absent. His worker gave me 5 disc plates. I gave him a spinner to duplicate with 1/4 stock.
‘Today I stopped in to say no hurry, and he had them done. Jackpot. 65 guaranteed for life spinners. These are deadly spinners.
These will take rimfire as well, no problem. Had no idea any of this was happening except the bank. Now I have to revamp my spinners. The rabbit hole gets another $440. today and that’s not Chambers or Vortek. Crow

Recently a buddy of mine asked me if I would make him a stock for his Thomas HPX benchrest rifle. His only request was that he could fire it from his shoulder. I had been wanting to build myself a stock for my RAW TM 1000….but never having built a rifle stock before, I agreed, hoping to learn a thing or two before bui one for myself. This is what I came up with……A quick drawing to have a place to start…since the only sizable piece of lumber I had in the shop was a 1x8x7’ board…that was it…set up for inletting……..a few hrs later.……..a little later……..another angle.….………grip detail……..my experience staining Poplar is less than stellar..I used L’Oreal permanent hair dye…6RB…went on ok..a little fiddly to even out color.…….final test fit so I could return the rifle…….finished stock..……well that’s it…I learned a lot of what works, what doesn’t..the order of processes..choosing a more stock friendly material…finish over dye requires a sprayed sealer coat.. and finally, how to create a new post on AGN.

I have some .177 pellets that I do not need. All are new, sealed tins. I'd like to sell them in the lots listed; if you want multiple lots, we can talk about a discount. All prices include shipping to lower 48. Paypal only. Thanks.

Air Arms 8.4 gr, 5 tins, $66
Air Arms 10.3 gr, 3 tins, $40
FX 8.44 gr, 4 tins, $55
FX 10.3 gr, 3 tins, $40
JSB 10.34 gr, 14 tins, $175

Others like to “tinker to their hearts delight”. The good news is you can have both! Check out the features of the BRK Ghost

Hello everyone,

I shot two squirrels yesterday while shooting my paper targets. I did not pick them up because I knew my local Turkey Vultures would need a snack to day. It beats the heck out of me how they can find a small dead animal in the middle of a National Forrest.

ThomasT

Was taken aback by this unusual sale. Am I missing something?? 5k for an old pumper???

Last night my wife said " the Squirrels are getting the bird seed , you need to do some shooting . " YES DEAR !

There seems to be NO clear cut answers as to the how much psi/per turn on the regulator. Without a gauge to see, it’s speculation and through all my research, 2 diff video and 1 post on here all have differing answers. A full turn = 100bar in one video, another says 120, on one of thr forums here, a user said 130-140. Does ANY AEA Challenger/challenger Pro have for sure documented evaluation while adjusting their regulator? It’s nuts that this info isn’t readily available since there is no gauge to tell you in the regulator.

A gun that you wished you didn’t sale, I had a Marauder prod, that I would like to have backshow me yours