*Waiting for details on the event, distance, caliber, etc.

Hi lads, I live in a country with very stupid gun laws, fortuntelly (for the moment) they don't pay much attention to airguns, but that may change in a near future.

I have some airguns for the hobby, but none of them specially powerfull cause I don't want to surpass the country legal limit, but you can have a full power air gun as long as it is limited. I have the chance to aquire a 30 FPE gun in .177, or a 40+ FPE in .22, of course both are limited to legal specs, but it will be really easy to put them on full power, I have no intention to do so, BUT... I'm also a bit prepper, not zombie apocalipse level... but more like medium to long term shortages and gradual turdtholation of my already struggle to grasp to ''1rst world'' category country.

In an extreme situation that may never happen, I would consider to hunt for food, mainly small game, there is plenty around here, but I also prefer to have the option to shoot a hog, there is plenty of them also, they truly are an infestation and a problem that would solve if gun laws and hunting permits where more reasonable to get. Yes, I see the infamous .177 sub 20 fpe hog kill and I know it can be done, and I also know that those power levels are far beyond the recomended to take efectivelly anything big, but we are talking on SHTF situation, you, your airgun, a hog on sight... .177 30 fpe or .22 40+fpe?

I own a scope with a lot of references.

I mounted this scope to the FX Panthera Compact.

First I learned how much to compensate at 88 yards and later on how much at 190 yards.

Then I decided to try a formula to get to know how much to compensate knowing the distance after a measure with the range finder.

What I learned is that dis-acceleration increases need of compensation: ratio at 77 yards of 0.1 vs ratio at 190 yards of 0.135.

Then I decided to create four blocks of formulas for four ranges 50 to 80, 90 to 110, 120 to 140 and 150 to 190.

After a measure with the range finder I insert the distance in the closer applicable formula and get how many compensation in that scope is needed.

The result is much more close than my previous instinctive/memory one I use to apply for compensation.

Well many of you would tell me that there's a software that you can feed and that gives you a number. Yes, I know.

The difference with this new way I am applying since yesterday is that is a tailor made for specific scope already mounted on an specific rifle. All truth an empirical.

I am anxious to go hunting and applying the formula and see results.

I currently have 2 HW 30's, an HW35 and a HW97. I am very happy with them all but am shopping for another rifle and would like to try something different. I only shoot targets and plink out to 25 yards and do not hunt, pest or compete. So, I have no need for power, just accuracy and the enjoyment of a well designed and built rifle. I have no desire for a pcp. I have 2 questions:

1. Are CO2, pump up, and pneumatic capable of the same accuracy as my HW's?

2. What are other brand names that are the equal of the HW rifles in terms of quality?

SOLD SOLD SOLD ...


$350 shipped with 1 mag and probe. Paypal F/F or you add fees.
Models from top down
Pic 2
Hp ss 22----sold
Hp max 30 ----sold
Hp max 50----sold

Pic 1
Challenger pro 22-----sold
Hp varmint 25----sold
Challenger bullpup 50----sold

Trouble shooting my mk2 ,
1) regulator is not regulating .I changed the reg and put a huma in also swapped out Al O rings on plenum still not regulated
2) all air dumps out of gun when bottle is removed .?
Any help would greatly appreciated

Jake

WTS - 5.5mm Taipan Veteran in Tactical Stock.

2 x Magazines
Single shot tray
Front adaptor to 1/2 UNF for moderator
Speed dial fitted at the back for hammer adjustment
Filling Nipple
Digital gauge
Very Accurate

$1250 Shipped

Clearing out the shooting closet of things I don't need anymore.

All prices include shipping and insurance to the lower 48, HI and AK will probably be extra and I'll figure out the delta and let you know. Payment via Paypal F&F, Zelle, USPS MO or check (will ship when payment arrives and clears.) I have plenty more positive feedback over on Sniper's Hide and Calguns if you want to crossreference, same username.

First up:

FX Pocket chronograph with barrel mount. Like new. Always used Lithium batteries so no leakage in the battery compartment ever.

Asking $175 Sold 10/20

Next up is my trusty Magnetospeed V3. Everything is included, and it’s in great condition. Always used lithium 123 batteries so no leaks. I did put a screen protector on it.

Asking $290


Last but not least, a Labradar.

Includes air rifle microphone trigger with bracket and extra microphone clips and gust guard foams, Piet recoil trigger, MKM aiming sight, labradar benchtop flat base with Artcise ARCA ballhead, labradar soft carrying case, flexible braided micro USB cable, SD card, gray ops ARCA mount, and an 18650 style external battery pack that was purchased right from Labradar so no power delivery issues.

Asking $475 -- Sold 10/20

Has anyone already checked after how many time of inactivity the FX Panthera Compact Hunter start to shoot irregularly with less fps?

This is indeed inconvenient for hunting purposes.....

AIRFORCE TEXAN SS 457 ( LIKE NEW SHOT 3-5 ROUNDS TO TEST )
FACTORY BOX
2 BOXES SLUGS
PURE ENERGY 4500 AIR TANK NEW
HAWKE SCOPE 4-12X ( missing 1 turret cap )

$1,250 obo ?

Please check out my other listings
I have a western bushbuck 45 also

Located Nashville TN.
( 37214) zip

Whenever I swap or stop using any of my barrels/liners I always clean them thoroughly first before storing.
I have this my selection (based on different twist rates) collected over several years, each barrel and liner has its own function depend what game I wanna play next.
Today was one of those grey days, what else to do...let me do a quick maintenance on my inventory.
Cleaned the bore with Ballistol (in the garage of course), dry them with couple of clean patches, and re-lubed with soaked PTFE oil.
But I noticed for first time something new to me, a light surface rust even if the material is Stainless. No problem, a light touch with steel wool did the magic, but I would like to put some coating now, these will be sitting at least the next half a year until next year season.
What you friends use? that is indoors (odourless) friendly

WTS A LIKE NEW WESTERN BUSHBUCK 45 ,WITH BOX ( 3to 5 SHOTS THROUGH IT WHEN I BOUGHT IT ) ,NEW ALLEN RIFLE SLING . OMEGA AIR TANK NEW NEVER FILLED OR USED

BOUGHT THIS BACK A FEW YRS AGO ,BUT I NEVER GOT A CHANCE TO GO ON A HUNT
BUSHBUCK 45 PAID $1800+
OMEGA TANK $600
$1,500 obo


** IF YOU WANT EVERYTHING I HAVE LISTED I CAN DO A PKG.DEAL FOR BOTH AIR RIFLES & TANKS ALL OF IT. ( CASH IN PERSON OR PAYPAL F&F )

LOCATED IN NASHVILLE TN. 37214
CLOSE TO OPRYLAND HOTEL & GOLFCOURSE AREA OFF BRILEY PKWY . CAN SEMD MORE PICS OF ANYTHING YOU LIKE ,THANKS !

I’m so surprised that I didn’t recover the chipmunk.
I was shooting a steel gopher target at 70 yards when a chipmunk stood up on the rock by the target.
I had the RedWolf .177 stacking slugs on the target and it was an easy shot from the rest and tail bag.
You can see the rock at the top of the photo.
There was the usual loud pop, but when I got there I couldn’t find the chipmunk, just a lot of blood and even brain matter on the rocks.
Must have been grabbed by a predator or something, no way it got away don’t you think?
My cat was totally bummed out when I arrived back to the yard with no chipmunk lol!

I have an FX Impact M3 compact and an AEA SF22 compact. My Caldwell bench / shooting rest won't work with these at all. Anyone found a good fitting SINGLE PIECE unit, not using double bags etc. Seems the muzzle is always way high and the stock is way low. Anyone??

Extreme Field Target (EFT) tee shirts. Very nice material similar to the Nike Dry Fit shirts. M, L, XL, 2XL.
$30 each plus $5 shipping.
PS., that’s Tony @pesty3782 doing the modeling.

I have a quick question on fx barrels. I use a carbon fiber barrel sleeve on my Maverick and this actually goes to the impacts also. I was curious has anyone ever used a carbon fiber tube instead of all the original barrel kit?

Instead of the, which I’m guessing the steel threaded tube, switching it out for a carbon fiber that will capture the liner and thread the ends to mate with the transfer port and the jam/lock nut. Has anyone thought of this for stiffening the barrel and reduce vibrations?

When I was in AGS last week the owner gave me a couple tins of Chinese rounds to try. Said they were new. I don’t know if new just in Canada or globally. The tins are decent with foam adhered to the lid to prevent damage. He said they were cheaper.They had a loose fit compared to the JSB 13.—. Clean looking as wellJSB on left. I found them to be accurate in my 54. This is 5-6 shots 45 yds.Have to say I‘m impressed. Caught totally of guard. Crow

I checking out my 54, ZR mount out this morning. I also grabbed a HW50 .20, one of a few I got at AOA lately.
Can’t believe I missed this, you could see it if you were standing on I-75. I just put it on the block, to get ready to shoot, just didn’t look right.Mycapt65 you’re on the money. Looks like I have a bending job to do. Crow

Moderator to fit Crosman 2240, 2300T, 2300S and others with a 7/16 diameter x 10" long barrel. Three chamber, held on with a single set screw, and a rear bushing, very effective. No POI change .
Was 60 now 50 bucks shipped. USPS money order, bank check, cash, money transfer.

WTS - P15 .177
Very good Condition - Like new with upgrade shoroud.

Great Shooter and very accurate
Not pellet fuzzy at all

Shoots JSB 13gr slugs very well - +/- 18Ft/lb with a good shot count
Very accurate with 13.43 gr JSB Redesigns
Great accuracy

Includes everything in the picture with origenal box, spare o,rings & tool kit.

3 x Carm Magazine
1 x Origenal Magazine
1 x Origenal Single load tray
3d Printed bipod adaptor, cheek piece and 3 x magazine hloder,s & bud pad.
Incl fill probe( not in Picture)

$385 shipped in the US

Wil trade for a night vision scope or a SWFA 10x scope and balance in cash.

Text:
806 566 7190

Selling my pp-700 I’ve had for some time now.. just doesn’t see enough use to justify keeping it.
Comes with factory 22, 177 barrels and a custom 25cal barrel with 1/2-20 threads on the end. Also an extra shroud is included.
The pistol has a few small usage marks but is in overall good shape and holds air forever.
Asking $250 shipped inside conus.

Our busy air gun shop is growing and we are looking for sales associates! Be part of our kick-ass team at our John Wick inspired shop and work at the largest air gun competition on the East Coast, the Northeast Airgun Classic. Looking for a self-motivated, enthusiastic person who shares our passion for all things air guns. Please email your resume to: [email protected]

FX USA is currently fixing all the guns that customers have sent in as of the first half of October. As you can probably assume from recent events, there is a slight delay. The tech department is still here working to support the FX customers. Thank you for your continued patience as we navigate through this situation.

I am new to airguns and am enthusiasticly interested in modern pcp technology which is novel and new to me.
I posted questions out of intellectual curiosity and have now been banned from responding to member classifieds.

I served in the Marine Corps and keep my honor clean, nothing up my sleeve.

Am I banned from making purchases from member classified now?