Up for sale is a like new FX Panthera 700mm .22 Cal. The rifle has 650 rounds through it.
Selling to help fund a custom guitar build.
Please note: this listing does not include optic/accessories.
This listing includes rifle, case, magazine, fill probe, and owner's manual.
Groups shown were shot at 70.5 yards.
$1660 Shipped. Firm.
Ships CONUS only.
Paypal friends and family or buyer pays extra 3% for Paypal goods and services.

So the subject says it. ( lol ) I "need" another gun like a need another hole in my head but . . . I finally pulled the trigger and ordered one up from Tony @Talontunes. Keeping it simple I just grabbed one of the black synthetic stock ones. For those of you who have one - straight out of the box - am I going to be able to chuck at least 30g slugs at speed. Speed being 950+. My RTI P1 w/the latest RPB barrel is chucking 25g H&N HP II's at 965'ish quite well and that's "only" a 600mm barrel. Curious to hear from any of you who have one / had one how your experiences were with yours right out of the box. Thanks guys.

After about 30-40 shots with my springer pistols I get this feeling that it’s almost time to refill the air..then I remember there is NO air tube! Been shooting pcp guns so long my brain has grown accustomed to this routine of shoot and fill. This is not to say I dislike my pcp guns now but I do appreciate the freedom of not having to refill the air reservoir. Having to cock the barrel and load the pellet kinda reminds me of shooting my recurve bow so no issue there. These 2 springer pistols get just as much shooting time as my pcp pistols.

On a side note: it’s crazy how the tempest is almost as powerful as the Diana at half the size.

This guy woke up and made his home in my garden tryed to hid it in the daffodils near the asparagus planted last year. It was him or the asparagus. But the Taipan bite is deadly.

Hello have a m3 with a few upgrades im not using and i wanna add some cool stuff to Panthera. I would be willing to trade fro the right thing as in another panther a or a crown with a saber chassis that’s about it. 1600 plus shipping and fees. PayPal goods and services only. I have a lot of good feedback on facebook and can even video chat or what ever you would like for verification. Pm me with any questions. Gun case and a few things of ammo will be included. No scope can be included for a little extra. Has saber tactical bag rider. Bottom rail and non glused carbon liner sleeve. This gun has very minimal used and has always been stored in the case not a single scratch. Firm on price as its not a must sell item.

I know this has likely been asked before, but:

- Will USPS accept airguns?
- Will UPS accept airguns?
- Will FedEx accept airguns?

- Who else does?

Thanks ...................

This is kind of a follow-up on SpiralGroove's question. So it appears that most don't actually describe what they are shipping, but give a vague description such as pneumatic tool or sporting goods. My question is, if you insure it and have given this vague description, will any of the carriers cover it when they find out what it actually is?

Haven't seen much on these guns. I heard they've been released in the wild during my break from forums this winter, but not much info at all on them.

yes, got out the old mach12.5 after 'years', cleaned her up and put it through its paces .. actually had fun ..
i completely worked this gun way back when i got it, and got it to shoot fair, it actually shoots about a 1/2" group at 15y pushing crosman 14.3s over 20ft lbs, problem is no scope on the planet can withstand the brutality of the recoil this thing dishes out haha .. if the scope doesnt plain move the internals will come apart, its a matter of trusting it, i never know how long it stay put but i had fun, was tagging stuff out to 50 np ...

HI All, I am bob a new member on here, going to enjoy this forum , I have shot air rifles for a lot of years now and enjoy target work and hunting, atb bob

This pest been crapping along my back fence for a year! This year I started feeding the birds and baiting in front of my bullet trap. Tonight was his last trip!
The job was given to my AEA Ultralight air rifle spitting crosman 14.3 hp 850+fps at 16 yard. Not much death action fell where he was at feet action for a couple mins.

I picked up my used TX200 in September 2023, about 1 month before EBR. It was a basic TX200 in a factory stock. After testing a few pellets, the H&N 10.65 squeaked by the best group.

Had a few practice sessions on the bench at 50 yards. I then shot it at EBR at the 50 yard benchrest competition. The wind was howling and a lot of colorful words were heard up and down the shooting line…..Well, we did pretty good and got the Silver medal. Missed Gold by 3 points. Podium was Tony T, Tony P. Tony S. Yeah they had to call us up by last name



I put a Vortek kit in it and continued my journey with the TX. Tony T. was selling a LP Custom birch laminate stock unfinished that I couldn’t resist. I used 2 coats of Odie’s oil and 1 coat of Odie’s wax keeping the stock blonde. Team Centercut likes to name their rifles. It was Mike who said Norma Jean….Heck the stock even has a beauty mark on the cheek rest so Norma Jean she became.



Next competition was the Sonoran Classic Grand Prix and I competed with Norma Jean. After 2 days of shooting we won the Silver Medal again. Missed the Gold by 4 points. Who was on the podium you may ask ….Tony T. Tony P. and Tony S. We all were shooting TX200’s.



At the Sonoran Classic I spoke to Cameron K., a springer guru, and he shot Norma Jean. He said she was shooting a little hot and could use some internal smoothing out. He said he could have her done and back to me before the Arizona Piston/Springer State Championship. I pulled the workings out of the stock and handed them to Cameron. About 4 days later I received a package at my front door and Cameron had worked his magic on her.

Back into the stock and pellet testing. I had 4 days until the State Match to get her ready. Well a surprise to me was this time the H&N pellets came in 2nd. A beat up old tin of QYS 9 grainers took the top spot. They didn’t squeak by, they blew by. So I set up the ranging wheel and at a local practice match I whopped Tony T’s butt!!!! I also won my 5 dollars back I had lost at the Sonoran Classic from him.

The big day arrived, but my springer mentor, Tony T couldn’t make it. We had a 52 shot course and Norma Jean nailed it! We got 49 out of 52, the top score out of all shooters. Norma Jean took the Gold Medal and the Arizona State Springer Championship home. Terry and Scott had a shoot off with 44 each and Terry pulled off second place.



Well Norma Jean and I are signed up for the Cajuns in a few weeks. Barbara and I will be down that way so why not. But alas my mentor and good friend Tony T. won't be there.

A big thanks goes out to

Dale @drpietrzak for helping me with all my questions on shooting a Springer off a bench. He got hammered with questions because it is my first springer....

Mark K. for teaching me how to take the rifle apart and where to lube it.

Tony T for working with me on how to shoot a springer and helping me get it all sighted in for HFT the first time. He is also great to shoot with. Not the best looking cheerleader, but always there with positive and supportive comments. He is always rooting for you to knock down the targets.

Cameron K. @Kerndtc for taking the time talking to me and handing out a few pointers at the practice line. Of course for the outstanding work he did tuning up Norma Jean

Tony P.

Hi just bought a new rifle .22 cal fitted a huma extended rail and 2 plenums can’t wait to shoot it Sunday. Does anyone have a good reg pressure for pellets and slugs?

So I'm doing some digging for a friend and come across this picture(s) of two Team Crosman shooters who are holding Marauders in a stock which is something the likes of which i have never seen: @Airgun-Revisions question ? does Crosman have a FT team?

All of these were taken with the AT-44 .177 10.03gr mk3 jsb

View attachment 450114

View attachment 450115

View attachment 450116

View attachment 450117

UPDATE: 4/12/24 Post #16

Recently acquired a used Wildcat MK3 BT in .30 cal, 600mm barrel and a 580cc CF bottle.

I have been shooting it to get accustomed and after having shot about 200 + pellets (JSB 44.75 gr) I took to my chronograph to see how it is shooting.

With the power wheel set to 7, I noticed over a 36 shot string that it will shoot consistently but 3-4 shots will be 30-35 fps lower than the average. My rear manometer (WIKA) is set around 118-120 BAR and do not see it move around from shot to shot. Have not checked the front regulator pressure yet.

I have attached a few pictures of the area of the pellet probe and the reg gauges for reference

Another thing (see attached picture) is that every time I shoot, a puff of air comes out this hole in the barrel. Is this normal? Should there even be a hole there?

Thank you for the input.

See my string shot below and please advise what could be causing this issue.


Hole where a puff of air comes out after each shot

36 shot string:

885, 886, 888, 892, 894, 883, 891, 890, 890, 890, 890, 886, 888, 862, 864, 881, 896, 892, 894, 891, 891, 888, 894, 888, 891, 886, 879, 879, 863, 869, 891, 889, 896, 895, 895, 890

This is the first opportunity I’ve had to shoot my new HPX since last fall so it was great to be outside again shooting for the first time in 2024. I had this tuner left over from another project so I thought I’d see what kind of results I’d have using it on my HPX. I’ve got a LOT more testing to do but it shows some initially good results. Its really hard to improve on an already awesome rifle but it’s fun to do some testing.



On bull 24 I decided to try a meager attempt at what Mike does, shooting a 25 shot group, but my skills pale in comparison to his. All shooting was with unsorted, straight from the tin MRDs at 50Y outdoors.

The red numbers are tuner settings.

At the Misenheimer Ranch. Figured I’d pass along my findings.

1. The True Ballistic Chronograph is super easy to setup & use. I lined it up directly beneath the muzzle and it didn’t miss a single shot.
2. Atmospheric conditions affect the BC! Use the FX Radar app and select the option “send local weather to device”.
3. If possible record data out to 100y+. The BC most definitely changes as the velocity decreases.
4. While an average BC can be useful, multiple BC points are even better.

These snap shut food containers for campers can double as ammo tins.
Plus you can use a tin lid for easy ID or slap a piece of tape on for labeling.

There are many new rifles that seem to be ahead in making changes to make rifles more accurate and adjustable.

I have never owned a Kalibrgun rifle. I know they are known to be accurate.

What I do not know is if those rifles abandoned the effort of getting better.

We see Airgun Technology efforts with Vulcan 3, Vulcan 3 HP, Uragan 2.

We see the effort of Epic Two to have an super rifle in the market.

We see RTI effort to give the market with the Mora.

We constantly see FX with new models, some of those are REALLY good rifles.

The point is that my perception is that Kalibrgun is the equivalent Air Force at Czec Republic, that means absolutely negligent to evolve.

Am I wrong?

This rifle is in great condition. Low shot count. No modifications to the inside of this rifle. This rifle is regulated. No noticeable blemishes. I originally purchased it as a .30 compact & I then purchased the .177 500mm barrel kit. The .177 barrell is currently installed.

All originally supplied accessories. It comes with:

FX Maverick Compact PCP Rifle
.177 Barrel Installed
6 FX .177 Clips
.30 Barrel Kit Included
2 FX .30 Clips
Factory 300cc bottle
Custom Butt Stock with Mono Stand

Asking - $1500.°° plus shipping. "Reasonable offers"will be considered. May consider trades. Located in Houston. In the Panhandle of Florida for the next week and I have unit with me.

I ONLY SELL AND SHIP IN THE CONTIGUOUS UNITED STATES.

Payments accepted - Cash App or Zelle accepted.

I have a presslug press and the presslug cut 2. I purchased two extra sets of die’s in .22. All 3 sizes offered. I modified the hp pin on the .2173 die to make flat point. I probably made a few 1000 slugs, some were under .5” at 50 in a taipan vet cz 700mm barrel.
$1200 shipped. I have some lead wire, will have to ck on shipping price on that. Will answer questions, it’s very nice setup.thank you. Mark.

A week ago I took delivery of 3 rifles. Everyone is happy. Just my luck the next day Friday I see an add for this. A HW77 tuned by Venum. Had to act fast.Very touchy situation, and I knew it. I was scared. I mentioned to my wife there was a really nice rifle for sale. I got that “your dead“ look and was told no way, forget it. I used all my trump cards and charm, l thought it was going to be death by unga bunga.
I talked to the owner of the 77 and was forced to score. He was a class act. Did a great job packing.Custom stock. Has a nice cut out for the thumb, super comfortable.
The original owner lived in the Bahama’s. Had the rifle shipped to the UK. for a fine tune in 1989. He shot it for 20+ yrs. then moved to Canada. And sold it to my contact. He said he only shot it a few times, then it’s been a safe Queen. I’m putting it in my rotation, I’m shooting it. He said these were a favorite. Never seen before. Gave me a tin full. I only shot 3 through it and it’s clean. A sound I need on my other rifles. Really looking forward to shooting it. Tomorrow hopefully I’ll crony it. I’m stoked. Crow …….Happy Easter
Oh my wife saved the marriage.

Crown MKII, Saber Tactical stock, Donny FL moderator, 600mm .22 cal barrel. 380mm .177 cal barrel, Fat Bastard rear grip, 2each 22 cal magazines, 1 each .177 cal magazine, Fx carbon fiberliner sleeve for 600mm barrel, FX digital chronograph. asking $1325 shipped to your door CONUS only. Here are some pictures , scope not included can be added for $2k for scope. I am original owner I bought new just don't shoot anymore.

View attachment 449989

View attachment 449990

View attachment 449991

I have a medium sized lathe, while it can produce some good results, heavy cuts and particularly parting off or long boring bars causes chatter, and as everyone machinist knows once is starts it’s difficult to get rid of.

After watching numerous YouTube clips I decided to remove the compound slide and replace it with a solid lump of steel under my quick change tool post. This is clamped to the cross slide by 4 tee nuts. All I can say is WOW! What a difference, I can now double the feed rate and quadruple the depth of cut with no issues. Lighter cuts are giving a better surface finish and parting off is a doddle, chatter is now a thing of the past.
It cost me £60 for all the materials and about 5 hours of machining but time and money well spent

Another couple of tips that I picked up to reduce chatter, under the parting off tool put a strip of sheet copper before clamping down or a piece of soldering wire wrapped around a boring bar. I don’t fully understand why this works but it does.

Bb