I have been googling around, but could not find a definitive answer: Has Edgun begun building their rifles in the States, or are they still made in Belarus and imported?

23:35 to 23:60
Solid barrel. Not a liner. So looks like FX has started using solid barrels in their competion grade PCPs.

Liners in sporting guns.

Just scored one in .22 in beautiful condition, including the sights....even the front sight hood. Haven't seen one for sale in a while, but i thought i remember these rifles going for mich more. Some guy has one on ebay gor $1k but i think thats absolutely ridiculous....how did I do?

I made a mistake the other day and posted this outside of this section, I do apologize for that. And done so before my 10 days being a member. Second strike..
Today being my 10th day I will attempt this again.

Does anyone have an extra scope on the cheap, on fixed income and have an ex-wife. LOL.

can be older and used but need it to work good, it is for a gammo springer, .22
Looking for 3-12x40 or larger 4-16x44 variable power optic.
If anyone has one please drop me a message .

Thank you

I inherited this Raw from my dad last fall. With winter I hadn't had a chance to take it.out.to the range. Got it filled with air. Had a leak. Luckily Dad had a set of o rings. Figured that out. Filled it up with air and off to the range we went. What a blast! I am gonna order an assortment of pellets to test out. What's everyone's favorite pellet for their HM1000x?

Selling an FX Wildcat MKIII bare receiver with hammer spring adjuster knob & screw. Long story short, I bought a Wildcat MKIII from a member and it wasn't as pristine as described, there were signs of heavy use and tinkering of the rifle. The hammer adjuster screw threads are partially stripped at the outer end as shown in the photo. There is also a hairline crack in the thread area due to the thinness of the casting and excessive stress put on the adjuster knob. It can still hold the screw but not with heavy preload. It may be a fully functioning part if the threads were extended farther into the receiver and a longer screw was used. Might be good for someone wanting to do some sort of customized build. I didn't have time to mess with it and ended up buying new parts from FX to fix the rifle.

Would like to sell it to recover a small portion of the cost for the new parts I had to buy. $40.00 plus shipping. I'd also be open to offers. Payment by Paypal F&F.

Just saw this great video this morning:
The barrel housing looks quite different/new/thicker/stiffer at 24 minute mark, very interesting. Also confirmed my suspicion that DRS is NOT a panthera/dynamic competitor even though it supposed could be a high priced PRS competition gun.

Part 2:

When mine get here I'll be tuning it down for sub12 FT competition, it's a cool platform that has a lot of potential still.

Wheeler rifle scope leveling system, as new in original case.
$40.00 plus 5.00 USPS Priority Mail postage;

Luis
787 402 9751
[email protected]

Selling my beautiful TX 200. I never use it. She’s bone stock. There’s a scuff on the side of the stock that if I didn’t mention you’d never see but im
Honest and telling you. I’ve shot maybe 300 pellets through it. Asking $550 shipped CONUS. PayPal f&f

This is Farrah. It has as much feather as her. . … Its for a project I’m finalizing very soon . I’ll post later . Just thought it was to good to not share a sneak peak of this feather crotch beauty.. It will sit now for a week and then final oil/rotten stone polish, and but pad clean up. Oil dirtiys them when finishing them.. it has to cure before any solvents are used to clean them. HAPPY EASTER ….

like I tell my Girl.. “Good wood is hard to find, Hard wood is good to find”.
T

Enjoy your Family’s and God bless you all

Rings are new or like new and were mounted very minimally. All are picatinny except the Hawke rings.

Element 34mm high fde - Cost me $165 w/ cerakot selling for $100 shipped.
Eagle vision 34mm - $70 shipped
Utg pro 30mm - $50 shipped
Utg pro 34mm - $50 shipped
The Hawke rings - $35 shipped
Athlon rings - $35 shipped
Nightforce 30mm - Cost $190 selling for $110 shipped

I would sell the whole lot for 300 bucks if someone wanted to take them all off my hands otherwise I'd have to go to individual fair pricing , and the pricing is fair so don't be cheap.

An ill take it message means next step is payment, I will not answer any questions after "I'll take it" or anything of the like.

I also don't use PayPal, i use venmo or zelle only. My feedback is impeccable.

If this is true looks like I will be breaking my dry spell of buying new guns. The Taipans are the best guns out there and for some reason I group my Cricket B/P 22 in with the Taipan guns, You just cant go wrong with the brand . Unless you buy one that was dropped out of an airplane ,
Mike

The highlight of the walkthrough was being able to see an excitedly happy 7 year old boy shoot the Atomic and Pathfinder. It really made my day, am headed back shortly after pests this time.

Anyone have insight as to why this model is discontinued? Seems like it's aligned with the times and the increasing popularity of slugs.

Rats are very hard to terminate without using traps. It takes too much time and effort for each rat. This one triggered the alarm more than 5 times over the course of 3 hours. The motion webcam often misses the rat because it is in and out of view before the video capture starts.

Rats don't stay still for very long so you have to be quick. Quick isn't conducive to being precise. At my current skill level, if I took my time my aim is good for about 1", but I didn't have that the time with rats. That's why I passed on the 1st opportunity for a head shot. I probably would have missed and it would have been scared off. So I had to be patient and wait for a better body shot where aim isn't so important. Still the shot was far from ideal. Luckily I used a 60 fpe .25 instead of my 12 fpe .177 so the rat still died quickly.

Rats like the bong too!

The little guy surprised me,just getting broken in.I was looking for my HW50 and a little guy got in the way, and says to me I can shoot just as good plus I am better built,I was taken back, ok little guy I don't expect much from you yet;I do have a JM kit waiting to install in you.
Little guy has a strong pull to break,he surprised me because he shot as well as the German ones, Anyone knows who "little guy" is?

I was testing out a new mod I made for my Cricket 2 today and shot the best five shot group at 50 yards that I've shot with it so far and it was with the Crosman pellets......

How do the private messages work? Cant find that button...

A couple months back I sustained an eye damage. I've been playing with the doctors for a couple of months and have another appointment here in about 30 days but I'm not sure and they're not sure if there's any real repair to this. I've lost the ability to see my targets clearly at 100 yards I can still shoot 50 with quite a bit of strain. My desire for a 50 Power Scope is now becoming a, I think, necessity. However, I'm looking at the NiKKo stirling and the falcon. I know that the Nikko will get a little foggy at 50 power but I don't need it to 50. probably up only the 40 and the price is right at around 800. I'm looking for any advice and experience on the Nikko and others but, being retired and on Social Security with a budget, $800 is a lot better than 11 and 13 and 15 and 18 and 19. Thanks in advance.

New ish Taipan ....never even zeroed scope,comes with 2 mags and all the spare parts that came with it. Hawke sf30 scope and night force rings.

1300.00 with scope and ring or 950.00 without obo
May trade for smaller gun

For those gurus or not so gurus
My beloved Veteran 25 Long finally has failed me after many years of great performance, which is understandable.
It has developed a leak from the barrel breech but it’s only when I pull the lever to cock the gun, no leak when it’s closed but the rifle won’t fire.
Here is a short video to show you the problem. Before I start taking it apart I would like to know what could possibly be the problem, I couldn’t find a disassembly video. my guess is a broken valve stem or breech oring?
Any info will be great!




Renz

listing my BSA Defiant in 177. It has been sitting for months now with no use. holds air with no leaks. Scope is included and comes with one magazine and fill probe. the scope is a BSA 3-9. Priced to sell at $500 + shipping. i accept paypal, zelle or money order.

Here is what I got. LOL

The cool air nips, the sun hangs low,
A canvas stretched, the fields aglow.
Not lead nor fire, but whispered hush,An air gun held, a gentle crush.

The weight of wood, a polished gleam,
A beady sight, a focused dream.
A target waits, a distant ring,
Where feathered flight takes wing on wing.

A careful breath, a steady hand,
The pump's soft sigh across the land.
The pellet clicks, a silent vow,
To test the skill, and bring it down.

A finger tight, a trigger squeeze,
A puff of air that sets it free.
A fleeting hiss, a moment's flight,
Then wood it meets, with gentle bite.

No deafening boom,
no startled cry,
Just nature's peace beneath the sky.
A skill that tests, a focus keen,
Respect for life, on a grassy scene.

The target falls, a paper prize,But in the heart, a different prize.The joy of aim, the patient quest,A bond with nature, put to test.

So let the sun dip low and red,The air gun hums, the thoughts are fed.A quiet sport, a mindful art,Where skill and nature play their part.

Reposting my Evol HPS .22 for sale. Great condition. Comes with original mag and 1 carm mag. Also adapter 1/2 20 so you can install you moderator of choice. Will also come with barrel tool, just purchased from AOA. Scope and bipod not included. I have excellent feed back with all my sales. Feel free to reach out with any questions. PM, text or call 520/965/7362. Lower price at $1500 shipped CONUS. PayPal or Venmo for payment.
Thanks!
Ed



View attachment 20240212_112238.jpg

View attachment 20240212_112255.jpg

View attachment 20240212_112318.jpg

View attachment 20240212_112323.jpg

View attachment 20240212_112229.jpg