Cleaning out the safe and this one needs a new home. I bought this one from a fellow AGN member to be used as a truck gun. I don’t shoot it much anymore. It definitely has some scratches and is missing the rubber cover over the safety but still shoots great. I slipped an oring behind the tophat to bring the power down a bit. - SOLD pending payment

Includes:
12” .22 caliber barrel
12” .25 caliber barrel
Airforce bipod
Tank fill adapter
Airforce talonp
Donny FL adapter

$300 shipped CONUS PayPal FF preferred.

Alas, there are rats in the dilapidated old chicken barn that came with the property. Spotted one last night, but wasn’t ready for the shot. This evening I sat on my back deck and waited. I did not record the shot as I was way more interested in “making” the shot. It was facing me at the shot it measured at 13”.. The scope at 20x using the PIP mode, sending CPHPs. Going forward will be setting up bait stations and will be punishing them. Another example of why I love my wicked Atomic XRs… They simply perform for me when it counts. The red light shot is the kill site, the second image on my dirty back deck.

As suggested to me in another post, Hawke scopes are pretty good for the money. It will go on a pcp rifle...Air Venturi Avenger either 22 or 177. Which would you choose for yourself? Is there a better scope out there for under $200?

Need advice on a 54 and where to get the parts. Need a spring and seal kit. Not looking for anything radical. This is all new to me. Appreciate any help. Tia,Todd.

I have a FX maverick and have purchared Orion Iguana Hunter 3d printed magazines. Those work fine.

I just found these on Amazon. https://www.amazon.com/Maverick-Cro...1712765834&sprefix=,aps,121&sr=8-7&th=1&psc=1

The 3D printing looks a little rougher that the Orion mags. But they are 2 mags for 35.00 shipping included.

Has anyone used these? New seller as of April 5 2024 TqEquipments in Washington State. I also see QD Fox printed on the magazines.

I had to put a flashligh on my front sight to get it done, but the old guy still has it. Lol "both of us"

We grew old together.

I raised up the rear sight almost a 16th of an inch, using 8 strokes. JSB 13.73s.
I have been wanting to this but I decided not to put the older Streaks (65 & 55) up to this pressure, as they are original.

Hi, everyone:
We just wanted to wish everybody safe travels as you are making the journey to bayou country. Our club members have been working hard to make this a great weekend for all. The courses are looking great and the weather is as well, so bring your "A" game!
If you haven't already paid please bring exact cash or a check. Jennifer Wylie, who handles all of CSC's admin chores will not be able to attend this year so please bear with us. Also, we will have an exceptional amount of raffle items that need good homes, so plan accordingly!
Looking forward to seeing everyone! Laissez les Bon Temps Rouler!
-Griff

I have a Helos BTR Gen 2 6-24x56 MOA FFP. With XLR high pic rings.This is a great scope with great tracking. Just selling to get something with a little more magnification.Does NOT come with sun shade or bubble level. I am asking $410 shipped to your door. PayPal F&F preferred or add the 3%

Make sure to grab up one of the remaining tables for the Midwest Airgun show being held on June 1, 2024 in Columbus Ohio. Well known for being one of the largest and most diverse Airgun shows around with 100+ tables of both new and used airguns.

www.midwestairgunshow.com

MidWest Airgun Show 2022 | Airgun Advisor |

5/7 mph wind r to l. Jsb 13.7 @ 705 fpe. Bear get to live another day.

I'd like to sell everything you see Together as a lot for $400 and shipping.

Everything came off a factory .35 fx impact in good shape.

800mm
.35 cal Pellet barrel
580 bottle with valve
Standard block Power plenem complete
+more.

….to Woody, cause this Skout of mine has given me plenty of that lately, ha ha!!

I named her after a famous Bond girl. Very sexy gun, if I can say so myself.

All kidding aside, I’m not the greatest of shooters, I still have a long way to go as this is only the start of my 3rd year competing, but it’s great to know my equipment is up to the task!

I'm looking to sell some gear and pick up a rifle that is more special to me. And that means wood. 30 caliber ideally, 25 would be OK if its ultra high power tunable and can run slugs.

The AvengeX probably comes to mind, but I do not really like it's stock, and that's still underpowered even in .25 for what I'm seeking.

I think the FX Crown in Walnut is the best looking air rifle I've seen. Benjamin Cayden, Hatsan Neutron Star and the like are also pretty classy. And of course the Seneca Eagle Claw and Recluse are beautiful but not regulated. I'm not looking for a hunting rifle so much as a high power hole puncher with refinement.

Thing is I don't have FX Crown money and I would like it to be regulated unlike the Benji & Hatsan.

You guys probably know some sweet, modern, tunable high power 25/30 rifles with a nice wood stock that I'm forgetting about. Show me the way!

If I have to sell some crypto or metals and pick up a FX Crown so be it, but I would love to see what's out there and why you would recommend it. I might even think about a 22 if it's very tunable and can shoot regular pellets and heavy slugs with an easy adjustment. Gotta be pretty wood though

The FX King looks pretty nice feature wise even though I prefer the Crown in terms of looks

Hart rest, owned since new with aftermarket windage adjustable top that can accommodate a 3” and a 2/14” width. This top has coarse and and fine vertical adjustment. Well used but functions perfectly. $120.00 PayPal, conus only, this rest is 15lbs and shipping will be expensive but will split shipping with you.

Only from TalonTunes...accepting pre orders now.
Limited supply.

AGT Netvor Big Bore AirGun - Airgun Technology

<a href="https://talontunes.com/wp-content/uploads/2024/04/Screenshot-478.png"><img class="wp-image-28105 aligncenter" src="https://talontunes.com/wp-content/uploads/2024/04/Screenshot-478-300x41.png" alt="" width="382" height="52" /></a>

talontunes.com

457 Big Bore Rifle​

Barrel: Lothar-Walther-850mm​

Power Plenum 128.6

OAL 41 inches

Weight 10.3 lbs

Biathlon- style side lever​

Velocity

770fps-340grn-447fpe

688fps-500grn-525fpe

Improved air pressure regulator for high pressure​

– Pressure gauge​

– One-piece made monoblock​

– Adjustable buttpad ​

– Weaver plank for bipod​

– Easy air discharge ​

– Safety catch​

– 20 MOA sloped top weaver rail for optic sights​

– Ability to mount extra sound moderator​

– Power plenum almost 130 ccm​

Like new FX Wildcat MK3 in .25. Looks and works perfectly as it should. Currently puts JSB 25.39 at 905 Feet/second as currently tuned. I am trying to thin my airgun collection. Very nifty for the right guy in the compact size. Asking 1000.00 NOW 950.00 including shipping to CONUS. Call or text 714-296-7489 OK TRY 925.00 Also have several nice scopes that would be a perfect combo. 3-12x, also compact scope. Too many to list.

Hi, all. Found out my .22 HW30s is not something the local law wants me pesting with.

That's too bad, but I'm taking the opportunity to go back to the drawing board.
Priorities:

• accuracy
• quiet/moderated
• enough power to brain a grey squirrel @15yds

All of the research I've done tells me that I need a PCP.
I really like the idea of finding a (second-hand) AA S200 / CV200. It seems that for $3-400, I'd have an AG that can do all of the above, plus more. (I was sad to see that I missed out on 2 good examples sold here in the Classifieds over the last 3 weeks)

Are there any other PCP favorites in the sub-$400 range that I absolutely must consider?

So I have a Yong Heng and I was using it with a 28qt Coleman cooler full of water and ice, but I wanted to add a radiator so I wouldn't have to use ice anymore and make a closed loop cooling system.
this is a test setup and not everything is screwed into its final position.
So, first I tried it without the bottles with ice you see it the picture. The temperature rose to 75 pretty quickly and I stopped the test. The water going into the system was ambient temperature and the return water before the radiator was warm and after going through the radiator was a little cooler but still about body temperature. BTW, ambient temp is about 27 Celcius today.

Then I added the 2 bottles in the picture and the temperature still rose to about 72 or 73, but a lot slower than before. The water returning from the yong heng was still warm, above ambient temperature, so I left the radiator fan running to cool it down a little more. Water was exiting the radiator at just about room temperature. The water in the cooler was cold, but not too much, since the plastic bottle isolate the ice quite a bit.

Then I removed the bottles and just put ice straight in the water:


It was a lot of ice, covering the whole top of the cooler. In the picture most of the ice had already melted. The compressor temperature stabilized at about 60C until the ice ran out. While there was ice in the water I turned the radiator far off, because the water returning from the compressor was still colder then room temp and the radiator was actually warming the water back up again noticeably and helping to melt the ice faster.

So basically, from I gather, running the compressor with a closed loop and radiator seems to be impossible, unless I'm missing something.

BTW, adding the copper tubing and water cooling to the stainless pipes really worked well. The temperature on every stainless pipe was a lot cooler after the copper than before the copper tube and the the amount of water that would come out every time I would purge the water was noticeably more then it used to be before I added the cooling to the stainless pipes.

I’m selling my beautiful Lelya 2.0 in .22. The gun is bone stock as it came from Edgun West. Selling to pay for a . Comes with 4 magazines, fill probe and a UTG soft case. No leaks. Asking $1400 shipped paypal f&f please. Sorry I don’t have the cheesy box it came in. The lighting was weird when taking these photos that’s why they aren’t the same . It’s more like the top pic.

When filling an FX dreamline, the tube says Max fill is 230bar.. is that the rating for just the tube or the valves also?? I have a 250bar bottle on it and would like the extra couple shots from the 20psi

Hi Friends, this is my first post. I have been lurking for a while but wanted to jump into the deep end with a few questions.

I've been on a kick lately of obtaining the smaller diminutive low power break barrels. My latest acquisition being a slavia 618. However, I've come to realize that guns of this nature are basically extinct from a new production perspective.

What are the smallest break barrels currently being produced? I have a hw30 and compared to the slavia the thing seems like a chonker. I'm aware of the cometa 100, but that seems about it. What guns am I missing?

Up for sale is a classic, powerful, unregulated (low fill pressure) .25 Daystate Air Ranger. No regulator and no fuss! This is a great hunting rigTopped with an Athlon FFP 6-24X50 Argos on BRK mounts. This one has a full Huggett Shroud (shroud with moderator). The Huggett is very attractive and more importantly, effective in making 47 ft/lbs quiet! This Air Ranger is in great shape with just minor handling marks.


Shot string:
Created: 04/08/24 12:45 PM
Description: .25 Air Ranger
Notes 1: SB 4050
Notes 2: 190 bar fill to 150 bar
Distance to Chrono(FT): 1.00
Ballistic Coefficient: 0.039
Bullet Weight(gr): 25.39
Temp: N/A °F
BP: N/A inHg
Altitude: 150.00
# FPS FT-LBS PF
35 884 44.06 22.44
34 887 44.36 22.52
33 889 44.56 22.57
32 892 44.87 22.65
31 897 45.37 22.77
30 901 45.77 22.88
29 898 45.47 22.80
28 902 45.88 22.90
27 903 45.98 22.93
26 903 45.98 22.93
25 905 46.18 22.98
24 902 45.88 22.90
23 915 47.21 23.23
22 912 46.90 23.16
21 914 47.11 23.21
20 914 47.11 23.21
19 917 47.42 23.28
18 912 46.90 23.16
17 916 47.31 23.26
16 916 47.31 23.26
15 916 47.31 23.26
14 923 48.04 23.43
13 914 47.11 23.21
12 917 47.42 23.28
11 913 47.00 23.18
10 913 47.00 23.18
9 916 47.31 23.26
8 912 46.90 23.16
7 915 47.21 23.23
6 911 46.80 23.13
5 910 46.69 23.10
4 908 46.49 23.05
3 909 46.59 23.08
2 898 45.47 22.80
1 896 45.27 22.75
Average: 907.1 FPS
SD: 9.7 FPS
Min: 884 FPS
Max: 923 FPS
Spread: 39 FPS
Shot/sec: 0.1
True MV: 909 FPS


As you can see, from a 190 bar fill you will get great performance with 35 shots. The Air Ranger has a great trigger and impressive accuracy (above target is 2 - 5-shot groups at 30 yards, 1 below is at 50 yards). The walnut stock on this one is a real looker with fantastic tiger stripe figuring. Comes with (3) 10 shot factory magazine. Bottle has been upgraded to 480cc carbon fiber. PayPal sale. Deal by PM. Price for package is $1,235 $1,199 $1075 shipped and insured. Don’t need the scope and rings? Price for just the Air Ranger is $950 $850 shipped. No trades please.

A summer or two ago I asked if .20 was dead. It generated a lot of interest from shooters, though nothing from ammo manufacturers…
Anyway, I stumbled upon a nice older R1 in .20 around Christmas and that’s become my main rifle. The Blue Ribbon scope is smaller than I’m used to, but the clarity has allowed for longer shots than I’m used to. Really happy.
Then the other day I finally got lucky with a good price on my bucket list rifle, a Crow Magnum in .20 so I have to say…guess I’m all in on .20 now!
Luckily the R1 came with 12 tins of H&N

Bought a storage unit in Washington today, saw 3 SCBA tanks with micro hoses, and a few other items that lead me to bid. Digging through the unit I found 4 SCBE tanks, gauges, hoses, etc. I also found 2 magazines, a .22 synthetic stocked Marauder, and a few thousand pellets.

1. It still had 2200 PSI so it held pressure for who knows how long. (last mail in the unit I saw was 2017)
2. First magazine ran fine, did nothing but insert, chamber a pellet and fired 1 round. Worked fine.
3. Second magazine I tried to insert and there was a depression in the black plastic of a different size, it was thicker, and it would not fit into the magazine space.

The thicker magazine was the same design, held 8 shots. Didn't fit.


Any suggestions on where to get the proper magazines for this new "to me" rifle?

(And yes, it was a great unit for the price considering what I got.)





Thanks!

I bought this AC/DC JTS 4500 psi air compressor last year when I got my first pcp airgun. I’ve since bought a Daystate compressor and a tank and this is just sitting around gathering dust. I used it maybe a month. I have all the tools and replacement parts that came with it.

$375, includes shipping with insurance