Vulcan 3 700mm 30 cal
54gn Thor Press slug @ 976 fps

About 40 yards for both shots. Plenty of time for the 1st shot so couldn't have been more
dead on but the rabbit kept moving so I rushed the shot a tad because I had already missed two
brief opportunities because of his movement, hit a bit low but still DRT.

For sale is this tank bracket for securing your 45 minute tank...........66 - 74 cu. ft. It's a great way to keep the tank firmly anchored to your fill station. I only have 60 minute tanks and find that this is just too snug for my liking. This bracket along with a strap or two will make sure that there will not be any issues with your set up. I use one myself and have another
unit inbound for my second tank. Selling for $ 32 now $30 including tracked shipping within the conus. Not interested in trades or offers at this time. Please deal by pm. Thanks for looking.
Herb

I have always looked to Pyramid Air as a guidepost for reputable/quality air rifles. If something isn’t carried by Pyramid Air, it has been a red flag for me.

I’ve watched several video reviews of the Western Rattler and have become interested in it. A quick search of Pyramid Air shows they do not carry any Western product, which makes me very reluctant in purchasing a Rattler.

What are your thoughts about the Rattler and should Pyramid not carrying it be a reason for concern?

I have a few too many airguns and some just end up laying around in the safe. Here's one of my Notos .22's. It is only a few months old and unmolested. Included is a Hawke 4X AO scope with mildot reticle. This is a great shooter, truly both Notos I own are stellar shooters and you simply can't go wrong with them.
$250 shipped in con us

Well guys what do you think? I have bad humidity where I’m at so I’m hoping the GX cs4 will be a strong enough compressor to run this setup. If anyone has experience with these 3 as a setup please let me know how it’s working.

I still have to install a 2,000 psi pressure maintaining valve at the top of top gold cylinder bc I’m told these systems don’t start getting moisture out of the system until the units are under about 1,800 psi?
Anyone know much about this I’m just learning. Thanks for any advice.

Hi,

I'm looking for some advice on my M3 because the behaviour of my first reg on my M3 looks weird.

I start at 150 bar on the first reg and 109-111 on the second.
When shooting the first reg overshoot to 165 bar and then settles again on 150 bar.
The second reg resets pretty fast and keeps at 109-111.

Is this normal behaviour?
Or is my first reg in need of a rebuild????
After how many shots do you rebuild a reg?

regards JP

I bet you have never seen one of these before! FX impact M2 in .25 and 600mm barrel. It is an amazing gun. Bought from Tom a few years ago. It comes w hard case and shipped to your door for $1350!!!! As an added bonus it includes not one, not two but 3 magazines. Sorry the pic shows 4. It shoots great and holds air. What else can I say. You lookie, you likie, you buy..ie and you get..ie shipped within a day or so. I’m not a great photographer so if you need more pics let me know. PP f&f or Zelle or Venmo. I’m not pickie. Oh. I’m not a heavy poster but I’m not an idiot. Scammers need not apply. If the deal is not straightforward I’m not interested. No trades

Does anyone know if this will work indoor at 10 yards?

I'm considering the FX Pocket Chronograph V2 vs the Garmin C1. In a prior post, the user experience was positive for the Garmin at 10 yards.

Does the FX work at 10 yards as well?

Thank you in advance.

Barry

...

Anyone else keep one at the ready just in case duty calls? My go to is my .177 ASP20. Not hold sensative in the least and still throwing a 10.3gr at 890fps. There's always a pellet loaded so when that groundhog that's been taunting me for over a month now finally gives me a safe shot I just have to cock it back and let one rip.

Hi all,


Wishing you well.

I got my Regulated Marauder recently. It's my first air rifle, though I have owned firearms for many years.


My first question, is the bolt on your Marauder super tough, and loading a pellet seems like it takes an unreasonable amount of drawback to get it the bolt action to go in to its second "click" and actually load air? I'm not sure if that makes sense or not...

Second question, is there any way that I can smooth it out or just make the required energy to load it lower?


Maybe this is normal for PCP air rifles, I'm not sure. I could imagine trapping and dispersing controlled amounts of pressurized air takes a bit of energy to toggle the mechanism, but it's still crazy how much more it takes when compared even to loading like 50cal sniper rifle side actions that are super smooth, light, and can be done with your thumb.


Thanks in advance for your help!

Here's a good HAM reporting article about the new barrel manufacturer, Sub-MOA. This is a new business venture by Tom Costan and Tracy Skipper to provide super-accurate machined barrels at specialized twist rates. The airgun industry, benchrest competitor, and shooting sports enthusiasts alike have been needing this technology to get to the next level of chasing accuracy.

I am looking at the Taipan Veteran 2 700mm 22 for strictly for benchrest, 50 to 75 yards. I see great videos, "out of box" that show great accuracy. Has anyone shot benchrest and done well with a Taipan Veteran 2? What kind of accuracy can one expect? Are the videos believable?

Have a Q about this rifle:
Mine has been under the bed for probably 2-3 yrs. When I put it there the tank was pretty much full @ 2000 psi. Took it out the other day....guage still read 2000!! However, I put 3-4 rounds through it, no way does the tank have that much pressure. Where it was stored was not excessive temps. Is my guage bad...do they just go bad sitting around at room temperature? Should these tanks hold pressure indefinitely...? What do I do to get it back in shooting condition? (I have not tried to pump it back up but will do so before attempting any fixes)

Walther Reign .22 - AS-NEW IN BOX (Purchased late May 2024)
This gun has UNDER 30 PELLETS THROUGH IT! I love the gun, but it is not quiet enough for me. This gun puts out over 35 ftlbs of energy (18.13gr @940fps). I removed the OEM useless bogus moderator (not an easy task, it needed a lathe to do it properly), then I chased the threads up so a proper moderator will butt to the barrel nicely. I asked Neil Clague to make me an extra long (over 8") moderator, and he did a brilliant job, but sadly it is still not quiet enough for me. All but 2 of the pellets through this gun were shot through the chrony. Never even sighted it in. Scope not included.

I want $475 for the gun without the moderator, or $650 with moderator, +s/h. And I can double box it for another +$20 if you want.

I would consider trades for FX or Brocock, NO Hatsan etc.

Vulcan 3 700mm 30 cal
54gn Thor Press slug @ 976 fps

Vintage Santa Rosa marked Beeman R1 for sale, in .177 cal. The rifle is in good/fair condition. The bluing is strong but has some rust freckling in certain areas on the compression tube and barrel. The barrel has two minor gouges. The stock is solid without any cracks, but has some small scratches and scuff from use. Functionally, the rifle cocks and and shoots fine but could use with a new break seal. Asking $320 Shipped.

Can anyone recommend these rings?

Selling my .22 cal Crown Mk2 Continum in the grey Salt and Pepper laminate stock. The regulator has been upgraded with the Huma-Air version.
Includes the 380mm and 700mm Superlite barrels w/ Superior liners, (2) 18 shot magazines, a tin of JTS 18 gr pellets, the Donny FL moderator, owners manual and the FX case.
I've looked the gun over carefully and have not found any dents or scratches aside from lite pressure marks where the scope rings attached. Gun will be double boxed for shipping.

Asking $1400 plus $50 for shipping. Let me know if you have questions.

Again

So I went out and got a scout epoch went out yesterday Saturday had a great time shooting it easy to tune got it shooting in a 30 Cal FX atomics at 960 shooting up to 150 yards doing really good A very good rifle sturdy durable very easy to tune things built like a tank accurate as heck I might’ve went to the dark side hahahaha

Recently rescued this neglected HW30S from a local auction house. Cost less than five bucks out the door, so can't complain about its looks.



This one is stamped with Beeman's Precision Airguns Inc., but no R7 branding. The Weihrauch website dates it to 1977 and the R7's first appeared in the 1982 BPA guide.




Should be a fun project. Will update this thread as repairs progress.
If anyone has a spare trigger guard or rear cap, let me know.

I have an FX 300 cc carbon fiber bottle w/valve for sale. Asking $150 TYD. ***** SOLD *****

I also have an FX Radar Chronometer MK1 with a rig I put together so it could be mounted on a Picatinny rail and adjusted for barrel length. This includes a 30mm carbon fiber tube, 30 mm scope ring, and the accessory FX mounting shoe. Asking $80 TYD

Prefer PayPal FF.

Set up a white piece of paper today with some beef blood on it and this guy was the first to come by. I'm actually having trouble attracting flies outside. I thought it'd be easier. I've tried all manner of concoctions and this is my second day with this and only one I could get to light on the paper. Benjamin Kratos by @Airgun-Revisions AA 16gr pellets and Athlon scope at roughly 22yds. One shot one kill. Wish more would come. What works better? They are trying to carry me off laying here. Maybe I should switch positions with the target lol.

Hi All!

Parting with another one of my .22 700mm FX Crown MK2.

This one has a beautiful wood stock, 700mm barrel with Superior liner. This is a very late model MK2 with the upgraded power wheel with 23 positions. Gun is in great shape and shoots like a Crown should.

This one does not come with a bottle, so if you have a spare bottle lying around this a hell of a deal.

1000 and split shipping

Pics to come.