Is there a website where n50 are held? I life in AR and would like try this sport. Every time I look it up, it seems to be for high schools. Clubs is only thing I can find. Any info would be appreciated.

Hello All,
I had a big win with a new spring on my BSA R10 SE in .22. The stock setup was getting about 32 shots on the regulator., and I didn't think this was enough, so I started looking at adding a SSG. I had seen some designs of SSG that would work, but they required cutting a hole in the stock at the back the receiver. I really wanted to keep the stock look of the gun. I then started looking into a short stiffer spring that would prevent striker bounce. I evaluated the stock spring in the spring calculation software see attached files for spring data. I then looked at what the bolt motion requirements were, and found that a spring that was 1.5" long should do the trick, and it needed to have a rate of 37 lbs/in. I found this spring on McMaster Carr, part number 94125K211.

This spring drops right in. It was a little snug on the spring guide, but it fit well.
After installing this spring, I adjusted the spring to provide 875 fps with JSB 15.9 grain pellets, and was able to get 50 shots on the regulator. This was my goal, and I am very pleased with the results.
I think the efficiency is almost as good as adding a SSG, and there was no need to modify any part or the stock. The only down side, is the spring is stiffer, and requires more effort to cock the rifle. I'll take that for the increased shot count.

Good luck if you try this modification.
Best regards,
Mike

I have had this gun all my life. It belonged to a relative and I found it in the garage. I remember it working and shooting bottles with it. I even shot my neighbor in the chest when he surprised me by jumping out with a knife. It left a red mark on his chest.
At some point over the last fifty years I lost the shot tube. So it has always sat in the back of the gun safe.

I looked for parts like seals for year and found nothing. And I found the hard parts are very difficult to come by.

I have been looking for a used shot tube but can’t find anything. Till now. E bay has an old broken Buck jones for parts . The stock is ruined but the shot tube is there. If I can get it I will have one gun I can take apart and use to figure out how to fix my gun.

Don’t want to do a full restoration just fix it.

Hi,

(I have more pictures but there are server errors I am fighting.)

Asking: $1500 free shipping (CONUS only) on me. Local pickup ok zip 33449.

- Bought it new from Utah AG in 7/2022. FX Impact M3 + Power Block - Black 600mm (standard). It was $2124 at my door then, retails $1900 now.
- BC FX Impact w/clamp shroud and tensioning kit (was $200 plus install). So the carbon is not a wrap but an actual carbon.
- Upgraded HUMA regulator (2nd stage I think) is installed. I think that was another $200 or so. I would have to look. Works great! It did not fully eliminate the initial shot phenomena that all FX has but I was told it needs breaking in. Do your research if this is an issue. For hunting it was for me so I went for the HUMA regulator. Original regulator is included.

Everything installed/tuned by my local FX shop. I do not dare to wrench on PCPs other than a scope install.

Scope and mount is not part of the deal but we can talk about it. it is a simple Stryka S7 1-6x24.

The rifle shoots and groups nice but I am not a bench shooter. This was used as a backyard hunting rifle for raccoons and the usual pest. It sat on a tripod and was sitting with me in the backyard on some nights. It was not dragged around much. I did one bench with it at a range. My application was 25 yards (you can search for some hunting threads of mine) and it shoots the same hole at that distance with whatever you tune it to. Slug, or pellet, heavy or light. But you do have to tune it and spend time with the settings whatever you shoot, slug or pellet.

Overall excellent condition. I can't find a scratch. I can send more images if needed just PM me. For some reason the server will not allow me.

I will take Zelle or a mailed check but it needs to clear prior shipping if your profile has not a lot behind it. I don't have a lot of feedback either but I have been around and active on the forums for a few years now.

Morini CM 200 EI VS Steyr LP50 Compact

Morini CM 200:
Excellent balance,Perfect relaxation,Very sensible built-in drive system.
Nothing to complain about. Very good weapon all possible adjustments for better comfort. Very well thought out.The application is free on download platforms. recommended to lovers of 10 m shooting.


Steyr LP50 Compact:
The weapon is very versatile. It is suitable for the "normal" LP40 discipline as well as for the new Lupi disciplines "multi-shot air pistol" and "standard air pistol".The dimensions are similar to those of a sports pistol, making it ideal for training in this discipline.

WTS

I have 2 of these in the original factory packaging. They fit all Kral long rifle breeches but expect to modify the stock to fit.

They will include an upgraded valve poppet made from Delrin and I will provide a plug for the rear hole as they were designed to also connect to a rear bottle on the Kral Superduty.

$99 each includes shipping CONUS ONLY
Paypal only

You will need your own bottles.

Up for grabs. Element Titan Rangefinder. Works as it should. Put your BC information in the app, import it, look threw glass, push the button .. Its that easy.. I just dont use it so here it is.. $400 shipped to your door .

Do you have a AR style stock? Want it folding? Don't want to pay HUNDREDS of DOLLARS???

Well here is the answer, first the good, it's inexpensive and it works, the bad and this is a variable, it's a touch loose (you are suppose to be able to tighten it but..... it may require some shims but....we love messing around with stuff. BECAUSE we have AIR GUNS. I am in conversation with him about a solution. I really don't notice it when shouldering it but when handling it it's annoying as heck.

AIMACULATE on eBay, the gentleman answers FAST!!! https://www.ebay.com/itm/326364918738?_skw=aimaculate&itmmeta=01JEYM7JAFS6A31YS5V6VYPGXQ&hash=item4bfcdd73d2:g:Y6cAAOSwAsNnUdb9&itmprp=enc:AQAJAAAA4HoV3kP08IDx+KZ9MfhVJKkLS6KUJIjxVHOtmX24+gcAwqB7RkQXU0rsqHnt3dHRfj5ePh0ubN8EL44IKa5PKjfZLctu3u9kOp68T4Gelgijpd8QNCtFRmODordxhMOxGuFbymmy2Rfua7FvCYlbaJoGwFjlRRT/tDLD2RuRlOHPki7RKcBcA0t0rF98bzLRgM6EuOexjj60OjdKeBrF1F20QwmALtD4UEPjzGoRCSYcXMCA7J11eUjidTksNNVRjn1UwNZM9OOJRjXohdQzpy9Dj1Ls2GOch8Bqcc+6w7uF|tkp:Bk9SR7ylntT3ZA. Not the cheapest but he does accept returns.

I"ll let you know how the rest of his customer service is.

For my Raptor it's a pleasure to be able to fold the stock for a case and not remove the moderator...as soon as I buy a case, and also to make the HSA and valve adjustments easier.

I did have to run the adapter in with some lube before assembly to get it to work. I also had to take a bit off of the supplied tool to get to the adapter when it's inside of the hinge, some disassembly and reassembly is required but not a big deal. Overall it'll suit my purposes and the price was fair. Forgot to mention he threw in a quick detach sling.

I thought Crosman moved to china? The pellets say made in BRAZIL I have not had a chance to try them in any of my 22 PCPs , They do have a dull look to them not clean and shiney like JTS and JBS pellets ,, I'll give them a try and post up what I think,,Got them on sale from PA , got 5 tins at 200 count each,,
Mike

14* and windy this morning. But we got a new inch of snow. So I decided to do a little bunny hunting with the Harpoon. I made up a 1/2 dozen loads of 3/4oz TSS #7 and headed to the woods. Was nice to be able to just walk and hunt without having to be quit deer hunting. I got a 11 point the second week of gun season and another 9 point durning the Muzzleloading season. On with the bunny hunting. First rabbit ran out from under the row boat by the pond. 15 yard running shot. 1 for 1! The second one was sitting on the creek bank. Not as exciting sitting at 20 yards. 2 for 2. The next one was in the bottom of the creek along the RR tracks. Missed him on the run. Twice! Jumped 2 more in brush piles but didn’t get a shot. On the way back to the house I jumped one in the fence-row along the lane. Picked him off as he crossed the lane. Total was 3 for 5. Not too bad for being a nasty day out.

I had the funky red dot and the moderator sitting in a box.Then I got this: https://airguncapital.com/products/2240-2250-1-2-20-unf-airgun-adapter Pretty quiet.

Hi everyone, this is Troy Hammer. I've got a bunch of personal airguns that I'd like to sell.
I'll be listing them individually. Please PM me with any questions.

Brand: Umarex
Caliber: .25
Model: Gauntlet Gen 1
Condition: LNIB
Other details: Includes all factory accessories sold "AS IS"
Price: $219
Shipping included (CONUS only)

Brand: Umarex
Caliber: .30
Model: Gauntlet Gen (Bolt not SL)
Condition: LNIB
Other details: Includes all factory accessories sold "AS IS"
Price: $219
Shipping included (CONUS only)

Out of an estate find over a decade ago, I got a box full of old vintage catalogs. Is there people that collect these? Where does a person learn a value on them? This is Not a solicitation. If I do decide to sell them, I’ll list them in the classified. Thank you

Looking for a JSAR mini raptor excellent condition working or not

Element Helix 4x16x44 FFP MOA Scope. Been sitting in the box for a couple years now. I used it..I loved it.. then move on to things with more magnification as i like to shoot lr. Has fx no limit ring on it $200 shipped . Enjoy

I was just shooting down range after some tuning and wanted to stretch her out to 185y tonight. Switched over to night mode, no IR, and this feller showed up. So I giggled and hit my white trash muffler target 10 yards away from it. This was my second shot that I have recorded here. My deer just don't care. Had to share the brilliance of silence.

Interested in trading a Taipan Veteran .25 Standard. Gun holds air absolutely no leaks. Hades at 950 crazy accurate just rarely shoot it. Wanna try something new in a hunt friendly platform.
Red stock custom stippled I’ll possibly be keeping the scope unless your trade requires it. I can send more pics.

This HW55S has a serial number on only the barrel. It’s not from Beeman. It’s from ARH. The receiver is not numbered. It’s as new in condition. Not exactly sure how to date it. Thank you

Leshey 2 with bottle like new condition with original box unmolested. Show me what you got.

I don't know the seller from "Adam." And I have exhausted any fun money for the current year and then some. But boy oh boy does this person have some cool traditional air guns for sale on eBay: https://www.ebay.com/sch/i.html?ite...trksid=p4429486.m3561.l170197&_ssn=maukev2020

Hey All,

Had this one lying around for a bit and just time to let it go.

RTI Prophet Performance, gun is fully assembled minus the barrel and probe.

Was out at one of our shoots and it just stopped cocking so put it in the case and has sat there ever since.

Gun is complete including regulator and 580cc RTI 300 bar bottle etc. Does not come with barrel or probe.

I would say 450.00 and we can split the shipping. OBO

Will ship in RTI hard case

NOTE- sold as is

Pics to come

Hi All.

First post, don't be too hard on me.

I want to upgrade to a big bore. My requirements are simple I think.

ACCURATE
RELIABLE
Simple to use operate and maintain.

I have a Diana in .177 (most accurate one I own), a Flashpup in .22, a Stormrider in .22 a Seneca in .25 and an Airbow. Hand pump. And a compressor that I am still figuring out!

The number of shots I understand is relative and not a really big deal within reason. As to cost, I am limited (thankfully) to around $1000

I think (as uneducated at this as I am) the AirForce TexanLSS-CF Package seems to fit my bill.

First then, the caliber. 308--357--457.

308-- More shots??
357-- Have Lead and molds. mostly pistol weights (grains)
457-- Have Lead and molds. All types 45LC to 45-120 monsters for BPCR Shillohette (sp)

I understand I would get 3-4 good shots from the last two. Not sure about the 308.

My State has not legalized Air Rifles for Deer yet. So I don'tknow what caliber. Also I would like to shoot it more than just deer season and prep.

Why does there seem to be such a disparity on the Texans? Or is it AirForce. Either it is super accurate or it's crap. Is there that big a difference? I can only afford to do this once!

So, these are my thoughts. Care to jerk me into reality? Please do!!!!

Any and all guidance is truly appreciated.

Decided to hunt the family farm this weekend and happy I did. Started out windy and cool with zero signs of life in the trees. I sat patiently on a hardwood hillside hoping a few fat squirrels would get hungry and come out. I caught movement out of the corner of my eye and started trying to find it among the trees. Spotted a beautiful yellow coyote trotting along the creek 150-175 yards below and across from me. She suddenly turned and crossed the creek traveling diagonally towards the hillside in front of me. I watched as she entered into a shooting lane that gave me a perfectly clear shot right at 75 yards. I barked once and she paused. I squeezed the trigger on my Maverick .30 sniper and watched her crumple in place. I was going for lungs because I was shooting hybrids and didn’t know if they’re capable of penetrating a coyote skull. I hit a little high and think I caught a piece of her spine. I’m happy with the outcome even though it wasn’t exactly a perfect shot. Everything happened so fast I feel lucky to have even had the opportunity and even luckier I was carrying enough rifle to pull it off cleanly. Either way our new beef calves hitting the ground over the past two weeks and the deer and turkey populations will have one less coyote to deal with. After taking photos and dragging her out I decided to change locations and continue trying to get a couple squirrels for the pot. Another stroke of luck hit me when I decided to try an area I hadn’t been in for 10-15 years. I settled in a draw about 20 feet deep on each side and had a small trickle of water running through the rocks. Didn’t take long to realize I was in a good spot. Shot 3 large males and then a female within minutes of settling in. Smoked another large male fox squirrel while I was retrieving the first 4. Never got a chance at the one more I needed to limit out but can’t complain after an amazing day in the woods.

Up for sale is a demo unit which only I shot and tested from new. This Taipan 2 has an unchoked 700mm CZ 1:17.7 twist barrel. Comes in a nice laminate stock. Barrel is nicely tensioned utilizing carbon fiber. Very effective factory moderator is included making this one of the most quiet 50 FP PCPs around! Trigger is superb. It’s tuned for 25gr .218 slugs at 935 fps. It will get about 40 shots from a 250 bar fill. Price is $1,395.00 $1,295 shipped CONUS (let's get it to you). Prefer PayPal FF or plus 3%. Scope & rings are not included. No trades. Comes with the factory bits (2 mags, spare seals, fill probe w/male foster and paperwork). Chrony numbers and accuracy example at 50 yards below which is 5 shots. This one is like new in box and is tried and true
Created: 12/05/24 06:04 AM
Description: .22 Veteran 2
Notes 1: TP1230048
Notes 2:
Distance to Chrono(FT): 1.00
Ballistic Coefficient: 0.950
Bullet Weight(gr): 25.00
Temp: N/A °F
BP: N/A inHg
Altitude: 150.00
# FPS FT-LBS PF
10 936 48.64 23.40
9 935 48.54 23.38
8 937 48.75 23.42
7 929 47.92 23.23
6 939 48.95 23.48
5 939 48.95 23.48
4 938 48.85 23.45
3 938 48.85 23.45
2 933 48.33 23.33
1 940 49.06 23.50
Average: 936.4 FPS
SD: 3.3 FPS
Min: 929 FPS
Max: 940 FPS
Spread: 11 FPS
Shot/sec: 0.1
True MV: 936 FPS

Recently, I have felt my accuracy has improved. On a 1/4 inch bullseye, with sorted pellets by weight, I had 25 of 30 inside the bullseye at 25 yards off of a bench with just a bipod and no other stabilizer. The other five were within 1/8 inch of the bullseye.(.22 Maverick Compact -500 mm barrel).
I have no idea if this is good bad or what.
Looking for comments, not approval. I practice weekly at local TWRA. Indoor range, so no wind.