In HFT we have rules... yeah i know they suck.... but rules are rules

so

In HFT hooks are generally not allowed but it also comes down to HOW MUCH of a hook we have

Taking this to the logical step in rules

how much angular extension is LEGAL in HFT?

I see no definitive measurements or angles listed by BOG anywhere in the AAFTA rules

so

Match directors are allowed to use their discretion which of course can b subjective and thus vary.

how much length is allowed from the vertical portion of the BUTT
and
How much (measured with a protractor) angle of projection = horizontal extension is allowed.

Whew?

As new in box all paperwork matching the serial number on rifle box as well. 22 caliber. Rifle is CHERRY. Un molested rifle meaning Stock. Was wiped down after each use and stored in a climate controlled environment. Very accurate with Jsb, and cheap crosman pellets. You wont find a better example.


350.00 shipped to your door.

I just got my M4 Standard .25 and mounted an Element Helix Scope with FX rings. I can not get the elevation to zero without increasing the front ring a couple millimeter. Is this normal? With both rings at the lowest setting and elevation bottomed out, it's still shooting almost a foot high! Does the new M4 have a built in slide to the picatinny rail? Can I flip the adjustable the adjustable rail to fix this, or is there another issue I need to address? Thanks

This rifle shoots NSA 29 grain, dish base slugs as a real champ.

It is delightful being able to push small stones at 200 yards.... Really, really pleasant !!

sold......​

​

Element Titan 3-18×50 FFP MIL Scope, with rings. $525 shipped usps priority with tracking, paypal Friends and family​

So I watched a couple of videos on Polish your barrel. They said it would increase accuracy allow for a better variety of ammo to be shot more consistently so I decided to give it a go!!! I haya Texan .457 CF long barrel. I have a Witt Machine muscle break as well attached. I proceeded as the video said and got it all done, and mannn did the inside of the barrel look GOOD!!! I was finally time to test it out!! After 20 shots it's was alllll over the place, then 30, 40, 50!!! Now I'm stressing about this new $400 barrel I am going to have to buy!! After shot 58 it seemed to be somewhat better but my tank was out and I had to call it quits!! Today I finally had time to fill my tank and try again!!! I was amazed!!! Attached is the target I shot. All 3 shot groups at 50yds!!! Top right is 6 3 shot groups of two types of ammo from lethal Air, center is Nielsen, top and bottom Right is Mr Hollow Point, and bottom Right is Pro slugs!!! Looks like polishing the barrel did exactly what everyone said it would do!! I was honestly shocked and just wanted to share with everyone. If you were thinking about doing it do not hesitate, you will not be disappointed!!!!!!!

Full house for a beautiful morning of shooting. The first match conditions were better than most days with a nice steady breeze. Second match more of the usual switchy stuff.
Shooting was good for John Voso he shot his first 250, congrats. Good to see some USARB folks showing up - good ol' reliable Doug Miller is hard to beat when Vipha is not beating him.

Some wonder why OG gets the scores in quick... I'm Speedy Fontana.







Lots of goodies this morning! Thanks to all.
Thanks to Tim (Mac1) for helping Joe score and bringing good air. Thanks to Dennis & Perry for fetching the targets.
Thank you JoeF for gifting us your facilities and more.

N50 Nationals Signup: https://practiscore.com/2024-n50-national-championship/register

National 50 Nationals NRA Link NRA Whittington Center : 2024 N50 National Championship www.nrawc.org
Link to N50 Nationals Events — National 50
N50: https://www.national50.net/
FB N50: https://www.facebook.com/50National/
AirGunNation: https://www.airgunnation.com/forums/benchrest.558872/
Benchrest Central: https://benchrest.com/forum/forums/airgun-benchrest.19/

Like new FX pocket chrono V2, only used a couple times, works perfect. 180.00 including shipping in US only.
I don't do PayPal.....Check or Postal M.O. only.

There are a huge number of supportive folks here. I have loved my TX200 and don't envision it ever leaving. I have loved it's accuracy.

I am an avid pb rimfire person as well. My Annie and CZs have filled that void. Alas my ancient Mossberg has as well. It is amazing.

So it seemed fitting, as I felt I was missing out, that I enter the PCP domain.

I love .177 so I stayed there. The Avenge-X seemed a good entry into this world. Base model for opening the door. It seems to have a fair bit of tweakability, like my CZ's, but I also realize it is not my Annie. I have a compressor and bottle are on the way with the X. Both Air Venturi.

So what am I about to hate about my decision? Let us get it over with.

is been a while since the megalodon came out to the point i think now they come with two fill ports so you can use it with one or two tanks. im really thinking hard on getting this any issues with this up to date.. looking for the either 50 cal or 51 call on 22 inch barrel.

Listing my 2023 huben k1 22. This has the camo stock on it now but comes with the factory black synthetic stock as well. Im going to get another gk1to play with. Shoots .219 28 grain zans and 25.4 jsb well. Has about 500 rounds through it and has held air and functioned flawless. The hydro dip job isn't 100% as you can see in the pictures but not bad at all. This was purchased from Kelly at krazcool.com. scope is not included. I'm assuming the colored dot was from Kelly marking something. You get the 2023 k1 .22 with original box, original stock, camo stock, fill probe, o rings, allen wrenched, factory paperwork. Will be double boxed shipped and insured through ups.

Asking $1250 shipped I prefer paypal f&f but will entertain other forms of payment.

Hi All I have a very early FX Crown (in the first 500 made) It has the 8mm reg piston - I only mention that to date it.

Now I have been out of shooting it for a while and it used to be an good gun and Shot JSB King Heavy MKII’s best at about 800fps and 120bar reg, this was how it came from the factory with a 600mm barrel.

I wanted to experiment with slugs. I watched all the usual Youtube suspects re tuning and got to work practicing on pellets first. In the end I got to about 155 bar reg pressure and had effectively maxed out the HST, on the MAX setting. it was shooting the MKII’s at about 930 fps but it sounded terrible, it wasn’t consistent, or accurate with the extra distance I could now achieve and I realised somewhere down the road I’d turned into a blind alley and this was just not right…

So Ive left the HST on almost Max when it was on MAX on the dial. I then reduced the Reg pressure to 100 bar, to start again. I had a tin of the lighter JSB Kings and started using them to experiment with. With my reg at 100 bar Im getting about 910-920fps with the HST at the “MIN” setting on the wheel.

Now here is what I really cant get my head around, and is making me question what I think I know…

When I keep the reg the same and increase the HST the FPS falls, and it does so linearly in line with the increase in HST so at the “MAX” position on the wheel I get 720ish FPS. Also the sound of the gun changes and becomes quieter and more “dull” less of a pop or crack and more of a hollow “thud”. what is more this is very consistent, if I turn the HST back down I get 920, back up I get 720. its not just all over the place

I thought that HST would increase FPS if every thing remains the same, or at very least it would not increase FPS, but to significantly reduce the FPS??? this makes no sense and I cant fathom how the mechanics of this would play out. I get that increased reg Pressure provides more resistance to HST so you get a shorter open duration on the valve and results in a decrease in FPS, but Im not touching the reg…so what gives

Can someone help me understand why this is? I thought I understood this, well until today!

Regards
SOTL

Hello guys. I have an fx impact 600mm .25 cal for sale. Asking price $1200 PayPal free shipping within the US. Only serious buyers please. Any questions let me know. Thanks.

We just received the FX DRS walnut with Super High Plenums in stock..
Please take a look...

FX Airguns - TalonAirguns

FX Airguns have been a trailblazer for the airgun industry since its inception. They have more patents, unique innovations and are more technologically advanced than any other airgun manufacturer existing today. Talon Tunes is proud to provide our customers with the best FX Airguns selection...

talontunes.com

Did they stop producing the JSB .177 10.34g Redesigned pellet ? Can’t find it anywhere.

Selling my Beeman MK1 HW77K 20 cal w/ tyrolean stock . 500 manufactured .
In excellent condition . Just thinning out the collection. Has 25mm piston .front site removed.
No bear trap. Serial # 102XXXX dated at or about 1986. See attached pictures
Shipped in hard case
1150.00 split shipping.
Usual payments accepted..

Selling my like new BRK Ghost silver edition. The gun is in mint condition and has been very well taken care of. The gun has never been out in the field. It is currently tuned for the JSB 25 grain and 33 grain pellets in .25cal and shoots them very well.

Comes with FAB Gradus grip, PRS rail and bag rider. If you have any question send me a DM. $2,000 Shipped PayPal.No Trades

Joe brancatto great white- $400

Fx impct x - $1000

Kalibrgun cricket -$675

2 taipan vets one in .22 one in .25 $700 each

Older impact in .25 $700

Several others not listed. All in as new condition , also compressor, Chrony , scopes, and more, 1000’s of .22 and .25 pellets .

Life gets in the way not hauling all this in our move , It’s been a while since I’ve been on here check it every cpl days

I was just cruising through AOA's website and noticed that prices on Daystate and Brocock airguns took a jump up. So much for the world economy and inflation.

Does anyone know of a "regulator" or some device that squeezes the air coming from a carbon tank so that it's less likely to blast the air into the pcp so fast? The reason I put the word regulator in quotes is because I'm not trying for a metered amount that's the same bar but a slowed down stream of air.

Shot another 100 yard EBR style match yesterday in the whirlywinds of Sparta Wisconsin with 10 of my other shooting friends. I used my RAW HM1000x rifle in .177 caliber prepared by the man, Martin Rutterford of Airguns-USA. At last months match, the winds were fairly calm and variable, but I really wanted to see if this gun could compete with all the other Impacts, Crowns, Red Pandas, and BRKs mostly in 30 caliber. The weather was more typical: 78 degrees, 5-18 MPH gusty winds which seemed to change direction every 25 yards. I shot 3 relays and qualified for the finals. My scores were 175, 179, and 193, but the other folks were just the same. There were no 220 -230 scores like last month. The point of all this is that caliber doesn't seem to be so important because all of these rifles were capable of being competitive regardless of caliber. I had to leave a little early due to family obligations, but I think the winner used a Crown M2 in 22 caliber with a score of 190 in the final round using pellets, no less. I won't say who it was, but he always drags this gun out at the last minute and wins with it.

Latest Taipan .22 Veteran 2 in mint condition. Appearance and function as close to new as possible.

I added the underside Picatinny rail and it has the Arca adapter connected to it.

At the breech, there is a rubber pad I added so my face did not touch the metal. This can be easily removed.

This includes the Taipan (latest model) with the moderator (see photos), filling probe, 2 magazines and some O rings that came with it. The scope is not included. I do not have the original box, but can assure you it will be very well packed.

I purchased it (as seen in the photo) from Tony at Talon Tunes — 5 months ago in March 2024, and used it occasionally. Decided to sell as I moved to a Daystate air rifle.

It is highly accurate and you will not find one in better condition.

This air rifle is listed at $1425 by the dealer without the picatinny rail and arca adapter.

My loss is your gain. $1000 with shipping CONUS.

It's he11 when your board.

NIB old stock, unfired Benjamin Marauder Pistol, asking $345 shipped CONUS, PayPal preferred

Air Venturi 74 cu ft air tank with carrying handle. Manufacturer date 1/02
Digital wave test date 08/2018
$195 shipped