Nevermind….hope someone got good deals. Already sold.

$1600 SHIPPED . Message me with offersl capable of over 170FPE. super accurate fx hybrids or 93 grain nsa
Some rounds of fx hybrids include with purchase. . MESSAGE ME with any further questions or offers /good history buying and selling.(Shipped in hard case)

700cc airmarksman bottle
Airmarksman long backbone rail
Full powerblock 720 plenum upgrade kit
Stx slug tensioned barel kit
Tungsten hammer weight
Brass piston regulator
Saber tactical ambidextrous side lever /block
2 original 18 round magazines























My average 170 yards group

First, sorry for asking because im sure its asked quite alot. The rat problem in my backyard has been getting worse, and since the traps aren't working well I might as well take matters into my own hands.

Looking to spend up to 200ish. I shoot alot of rifles, but never air guns and I don't hunt. The max is like 25 yards. Maybe I'll even put targets out. Maybe this will turn into a new hobby!

I was looking at the barra 1200g dual break. I saw a few good videso on it. ( I realy like the camo version )

Is there anything else worth taking a look at for that price point?

thanks

So I've had a tomato raider hitting my garden at night. I knew the squirrels weren't doing it because the tomatoes would be on the ground and almost totally eaten. Coons don't typically go for maters being too acidic, but these guys love them.

So little back story. Power went out Saturday night, I got woke up around midnight to a loud pop from the transformer. I reported the outage and fell back asleep. Next morning everything was kosher.

I went out to check the hens and garden, all was well. I go out this morning and I noticed the smell of death. I figured it was a bird or something I had blasted and didn't recover. Nope, it was this dude....



He was laying a couple feet away from the bottom of my power pole where the x former sits on top. Apparently he grounded out the wire leads and sent himself to possum heaven.

Key take away, my tomatoes didn't get bothered the last 2 nights, and 2 day old dead possum smells very bad!

Selling as a package deal. Really nice .22 MKII Impact Compact. Comes with 500mm & 600mm barrel kits (no extra pellet probe). 2 FX mags, 4 Carm low profile 13 shot mags, Stud mag/feeder/loader bundle, 3d printed buttpad/ monopod, 3d printed left hand cheek rest, Ergo grip, Saber Tactical bag rider and digital gauge on reg side. Includes everything in the pictures except the scope rings and bipod (and no, it doesn't include anything in the background ). As you can see in the pictures it has several M3 upgrades that had been put on it when I purchased it.

• FX Impact M3 600mm Barrel w/ Superior Liner & Dual Transfer Port (Pellet or Slug)
• FX Impact M3 Ambidextrous Cocking Block
• FX Impact M3 Oversized Cocking Handle
• FX Impact M3 20 MOA Scope Rail
• FX Impact M3 16 Position Power Wheel
• FX Impact M3 Skeletonized Buttpad
• Stainless steel bolt kit (already installed)

I've got it presently setup to shoot JSB, FX 16's at 900 fps with the 500 mm barrel. Great shooting airgun, very accurate with either barrel. $1400 shipped CONUS PP F&F or buyer pays fee.

I'm curious as to who is out shooting in this heat and what sort of setup do you have to make it more comfortable or bearable?

After about six months of research and watching youtube until my eyes bled I finally "pulled the trigger" on a new rifle. I have it set to 20 fpe with the white spring and the hammer spring all the way to minimum. Really liking the shot count. Likes any pellet as long it is a JSB.

For sale is my BRK GHOST .25 HP bought from AoA about one yr ago - functions perfectly and very accurate with the JTS 34grainers trigger tuned by Derrick Wall.
Included with gun everything pictured including BRK tensioning kit $1250 shipped anywhere in lower 48...green parts are painted camo area "Gun Skins" also comes with original grip and two factory magazines.
Payment method: PayPal FF

This is an AGT Vulcan 3 in .25 cal gun has less than 1 tin of pellets through it. Everything just as it came from Talon Tunes. Medical issues reason for selling. I can't find the thread protector as i always had a moderator on it. Comes with 3 magazines, fill probe, AGT case, about as close to new as you can get, $1150 Shipped to lower 48. You can message or text me at 9892257424.

Hey AGN Friends!

No longer shooting longish ranges, and I have some other projects I'd like to embark on - so my beloved Leshy 2 9mm is up for sale.

Purchased May 28th 2024, still with warranty. Two additional Titanium Mags (total of three) included. Muzzle brake, Behemoth mod system, Raptor regulator - this is top of the line.

Will include three mag holders under scope. QD foregrip and Scope are not included.

Shipping and insurance will be at my expense - included in the $3000 $2900 @2800 $2600 asking price. I will also consider a partial trade of a Leshiy 2 in a smaller caliber.

If you have Leshiy-lust, it doesn't get much better than this.

Payment types? Bitcoin, PayPal (friend and family only), CashApp or Strike are all accepted. I do not accept checks or money orders, sorry. Local pickup available in 33401 or thereabouts.

Thanks,
Mark

This is the Left Handed Air Arm TX200 MKIII Model with Monte Carlo Walnut Stock
A beautiful, classically styled air rifle in great condition. Stock has been finished with Royal London Oil obtained from Maccari (ARH)
Original Owner purchased new in 2017 from Pyramyd Air. Have original box and owner’s manual.
Selling this beauty since I went to the dark side and not shooting springers much these days.

Very accurate shooter using JSB 15.89 pellets. Chrono results: Avg velocity 639FPS and 14.4Ft/lbs at the muzzle.

Many upgrades including: Rowan Engineering Black Anodized cocking lever, Maccari Forged fore-end bracket, Maccari Cocking shoe, Maccari Spring, Hardened rear washer, Maccari Tesla seal, Apex Breech seals.

Also included are original spring, Vortek SHO kit, extra fore-end bracket, extra cocking shoe, assorted seals.

Does not include Scope or Mounts.

$625.00 shipped. Will ship only to continental US.

Will accept Paypal F&F

I ordered aa .30 Cal 600mm barrel kit for my new M4. It arrived on Friday and I tested it out yesterday. I was shocked when I couldn't even hit a 12 x 18 target at 35 yards! When I went to clean the barrel, thinking maybe that was the issue, I had a hard time getting the patch worm to feed through the barrel when inserted from the breach end. I removed the moderator adapter and this is what fell out of the end of the barrel.



I cleaned the barrel and put the adapter back on and went to shoot it at 10 yards. This is the shot pattern I was getting.



I was shooting the 44 grain JSB Hades pellets and noticed what appeared to be fragments of pellets hitting the target. I then removed the adapter again and this is what fell out of the end of the barrel.



I called the Vendor I purchased it from and after discussing various possibilities, he had me remove the adapter and shoot it again, it stacked pellets at 10 yards. So we measured the ID of the adapter and it was only 6.2mm! Seems FX made a major Faux Pas during assembly and put the wrong adapter on this barrel and it was literally shredding the pellets! A .25 cal pellet is 6.35 in diameter and a .30 cal pellet is 7.35mm, so I can only assume this adapter was probably meant to go on a .22 caliber barrel. In any event, the Vendor is contacting FX and sending me the correct adapter. The Vendor said they don't typically open and inspect barrel kits before shipping them to customers. He said this was the first time he had ever encountered this and was really surprised. So, just an FYI, if you get an FX Barrel that's shooting a shotgun pattern at 10 yards, check to ensure the correct adapter was installed at the factory!

This fellow trotted out in front of me while I was stalking a ground squirrel that was sitting on a tree log. Thanks for the gimme shot, pal.

So you look at their name to see where there from, USA, No town no state, Postal Money order only, Might as well send cash,, I used to trust everyone and I mean everyone , I have been burned on the gun sites 50, bucks 100 bucks , I didn't go broke and there not getting rich, At least with Pay Pal or a CC you have some protection, Sending cash or a Postal money order you have NONE,,, Ok I will stop bitching , Seen this stuff on the for sale site seen a few items I might like but no I am not sending a Money order, cash, or a blank check.
You dont even have an address on here, But we can trust you right, LOL.
Mike

I presently have a FX Sniper MkIII 2022 model, and I love it but its
a little long and heavy for squirrel hunting. Thinking of buying the new wildcat BT. My dealer of many years retired and closed shop. Any suggestions on where to buy a new rifle and get support to go along with it?

Thank you.

I took my rifle out of storage after about 4 years and it still had a little air pressure showing. At that I fired it empty and it worked. Fill to about 2700 psi and now when I try and fire all I hear is a twangy sound and no output? Any suggestions? Here’s a photo.

After my recent horrible experience with FX Dreamline POI shift issues I decided to build a receiver which I could clamp in a bench vise, then insert the FX barrel assembly so that I could see what's up with these liner/shroud set up's (ie. why the annoying POI shifts) independent of the rest of the FX rifle & the shooter. Anyhoo, in the meantime I figured out what the issue at the heart of the FX Dreamline accuracy is: it has no barrel. To make this gun shoot, the .177 version anyway, is as simple as throwing the stock straw/noodle/liner or whatever you call it in the trash, along with the flimsy little wagon wheels spacers & the shroud. Then, buy a real barrel & have someone machine it for you so it fits the FX receiver, problem solved!!!
I had already started machining my homemade receiver though so I thought I'd finish it up & post some progress. Caution: I am not a machinist by any standards! I am a tinkerer, go ahead & criticize my methods & machining standards all you want, I am always willing to learn!

I grabbed a piece of 6061 billet & drilled two holes all the way through with a long 1/4" drill bit from the hardware store:


Enlarged & reamed top hole for an 18" Crossman barrel that I have lying around:


Removed some material ahead of the lower hole so the valve could fit in there;


Used a boring bar to enlarge bottom hole to .788" to accept valve:



Test fit el-cheapo Amazon valve. Right after I bought this I saw one in Fleabay that comes with a regulator. I may upgrade to that if this receiver turn out ok, the front parts are the same:


Plunging the transfer port, I used an end mill since I was drilling through the barrel channel, drill bit likely would've walked:


Drilled & tapped some holes for a pic rail, you know, in case we wanna scope this sucker. Machinists may scorn me for tapping with the mill: I'm lazy ok, if it's faster I'm doin' it:

Scope rail holes & transfer port plug tapped:

I always consult my meticulous technical drawings before I cut:


Time to cut the loading port:


Little more room:


Test fit barrel, valve & tank:


Sorry for the lengthy thread, when I have more time I'll do more work on the thing& see where it goes (cue your words of encouragement here).

hypothetically speaking.. if i could get someone to make wooden stock for the notos. i need a show of hands of who would be willing to buy them.
i dont know CAD so if anyone can make a file, i know someone who might just take on the job of helping us make the notos prettier.

I need new seals for this pistol but need help identifying it exactly. The instructions I have with refers to a couple different models. Also it's co2 and wondering if it could be converted to PCP.

.25 Cal Impact X Silver 700mm

Face it, some of us like to tinker. If you can relate, this may be the package for you! I have an M4 on the horizon and I'm going to try to limit my tinkering to the Benjis and Crosmans. So I do not need all of these extra bits so they go with the rifle.

What's included:
FOUR PLENUMS - Original, External, Power and 720
Multiple Hammers
Springs, springs and more springs
Pin probe and flow through pellet probe
Kraford and Lypt Inverted Safety
Carbon Fiber Barrel Liner (not glued)
M3 style 16 click power adjuster
Saber Tactical Arca Rail
480cc Bottle
Black Arts Barrel Band
Factory regulator upgraded with brass piston
Factory hard case
Tension Barrel Block installed (tension shroud and nut NOT included)
Pellet A (currently installed) & Slug A liners
AirMarksman FX Impact Scope Rail Bubble Level
Multiple Valve Adjusters
Factory block

Current Configuration:
Power Block
720 Plenum
Pellet A liner and carbon fiber liner
Factory shroud and moderator
Factory Safety
Aluminum Side Shot Magazine (26-round version)
Factory Picatinny Trigger Guard

Bipod not included.

$1,200. MAKE ME AN OFFER. This gun has a lot of life left in it!

I have a Reximex Daystar. (Same as KRAL as Same Manufacturer) Im trying to tune it to get the proper bell curve, but I am runing out of Hammer Spring Adjustment. Im almost all the way in on the screw and the FPS seems to be still going up. ITs a 250 BAR fill and at Hammer Spring almost at max I start around 750 FPS and will go up to about 800 at 210/200 BAR, which is what I want.. (~800)

I assume I need to get a stiffer Hammer Spring?

From my understanding is you want to back off the Hammer Spring once you hit a plateau and I can't seem to hit it at 200+ BAR (Plateau)

From my understanding with an unregulated PCP at higher fill pressures the hammer is fighting the bottle pressure so FPS is lower at higher FILL pressure..

There is a regulator from Huma-Air made for this rifle so I am wondering if thats the best course of action.. If I have to figure out a proper stiffer spring I might as well just install a regulator.

Maybe I am missing something obvious..

I should add this is 0.25 CAL and I am tuning for the JSP Exact 25.5 grain. Rifle is rated for 850 FPS according to manufacturer specs at that grain / Caliber. So I am in the range for sure, but not sure if the hammer spring should be maxed to get to that number.

Thanks
Mike

I started to type this as a response to another thread about pellets for a 20 cal Hw95N. Nice rifle btw. Anyways I figured it was worth a wider audience.

11.42 FTTs
13.58 Barracuda
13.73 Exacts

PS you may find rebranded versions of the three I listed above (Referring to the other thread). Use the pellet weights as your guide line. Also if you're looking for the flat trajectory everyone expects from a 20 cal Weihrauch stay with the 11.42 FTTs. You should be around 800 fps with them. They are usually the highest or sometimes tied with the 13.73s for the highest energy in most Weihrauchs. The Hw90 being the exception. I haven't noticed much difference in accuracy between the two. Best accuracy can flip flop between tin lot numbers.

If you're going for longer distances (>50 yards) the 13.73 JSBs have an BC edge over the FTTs.

JSBs 13.73 = 0.0373
FTTs 11.42 = 0.0274

These are actual numbers. Published data is incorrect. Wildly incorrect on the FTTs.
My numbers were done using my R1 and two matched chronographs set 47 yards apart.

I recommend 20 cals if you're looking for something different and or accuracy from your Weihrauch. Other than the the 11.42 FTTs the 20s aren't any flatter than 22s. They both shoot low 700s. The reason is the larger 22 bore diameter generally adds about a pound of energy from the same rifle. That extra pound will push standard weight 22 lead pellets as fast as the 20 caliber will 13.58s and 13.73s. The BC between the 20 and 22 is close enough it's a wash. So the flatter 20 caliber argument is bunk unless you use the FTTs. Then you give up BC at longer distances. This is where switching to 13.73 JSBs puts you in the same trajectory as a 22.

Accuracy, I've never seen a Weihrauch 20 that wasn't accurate. Usually they are stupid accurate. I can't say the same about Weihrauch 22s. Most are good to great. I have seen a couple that weren't. Weihrauch seems to put more care in their 20 caliber barrels. They're certainly more expensive than the others.

Weihrauch 22 accuracy is normally very good to great. I don't want people telling me I'm giving 22 Weihrauchs a bad rap. Its just I've seen a few oversized bores that makes them pellet picky. Usually 5.54 or 5.55 head FTTs straightens them right out.

In the end 20 cals are a safe bet for accuracy at the expense of pellet choices. The 22 cals are just as flat and make more energy with a wider selection of easier to find pellets. That's unless you get an oversized bore then your choices will be as limited as the 20 cal.

My source of information is from tuning and testing several 20 and 22 cal Weihrauchs over the years. I also own four Hw95 family guns in three calibers.
Hw95 177 cal
R9 SE 20 cal
Hw98 20 cal
Hw95 Field Pro 22 cal
Every one of these guns has something great about them. There's no bad calibers for them. The 95 platform is a great platform.

I also have a R1 that has worn 177, (2) 20 and 22 caliber barrels since I've owned it. I've extensively tested the difference in manners and output between all three calibers. I still have a 20 caliber barrel for it but like it best in 22.

I'd say I have a pretty good cross section of experience to back my pragmatic statements here. I know someone will take offense to something I've said because they like this or that. That's their perogative. I'm just providing general facts and experiences for people to use as they wish.

HTH
Be well
Ron

I am about to order a CX4i. Saw this deal. It says it ships from w/in the US. Just curious if others have ordered from them and if it is a legit GX:

I have a Benjamin discovery I would like to sell. The gun has been modified. It will come as pictured. It has a regulated bottle up front with a magnum airpower adapter. A Benjamin marauder trigger with a homemade trigger guard. The valve has been ported and a marauder valve stem added. It has a barska level 1.5-6-44 scope. It will come with the original air tube and all the included accessories like the gauge port and fill adapter, will also come with 3 magnum airpower valve screws. The butt plug I replaced with one I made to get an adjustable spring but it's not the best and the 2 screws that are holding it in place a stripped as well. It stays in place but would recommend replacing both.
Looking to get $200 obo.
Let me know if you have any questions.
My email is
[email protected]

Edited: also included is a used Benjamin hand pump.