BSA LIGHTNING clx. Not sure if it’s gonna make it over here soon or at all. Hopefully it’s a better trigger and breech block set up. They are offering it in walnut.

Looking to get a U2 compact .177

So my question is What's the best hunting scope you guys have used? Here are some things I personally need in a scope!
1: weight low
2: FFP 3-10 OR FIXED 10x
3: Clear glass
4: Dial turrets
5: Great customer service
6: Zero stop features

So far the element brand is great but I open to new possible brand. I had a swift fixed 10 it was sweet.

Amazon hand pump? not for long, like 5 pistol tank fills $60

NYDWXYZ all you need if just filling a small gun tank. Noisy , slow , hot $200

Gx cs4i. Very nice , fairly quiet, slow , cool, fills 9 liter tank in one shot ( 5 hours ) $480

Tuxing TXED042 or similarly based . So far: heavy, very fast, relatively quiet, because fast will top off my 9 liter before it can get hot. $360

The Umarex Notos is my favorite affordable airgun. I got it for $229 on sale, Its regulated, compact and light weight. Very accurate out to 50 yards.
Great started PCP airgun.

I added the Moderator to make it more backyard friendly and also added the Mlok hand grip to add some accessories.


Mlok Hand grip
CanCan moderator brings down the sound by only added 1 inch to overall length.

gun is new has 2 mags down it tack driver 25 cal with the large pendum no scope or ldc just the rifle

New member here my name is David have been into airguns since 2011 had got out of them in the last 2 or 3 years due to health reasons but now getting back into them. Looking forward to meeting all the people on here

I'm trying to wrap my head around Huma's regulator design & I don't mean to call out Huma specifically. I own their products & believe their machining quality/finish is 2nd to none. In reality my questions could be applied to all PCP regulated air rifles.

In reference to the regulators in pcp guns they all seem to use spring washers are providing the resistance to the flow of air from a high pressure to a low pressure. As that pressure difference increases the resistance to flow weakens & the flow increases. As the difference lowers the resistance to flow increases & the transfer lowers. this process never completes. the transfer tapers off to infinity & thus never completing the transfer. The amount of transfer can be so small that our tiny gauges would never be able to show the difference, nor could we hear the common hiss of that tiny amount of air passing thru the regulators. This process begins & continues once we place air into the gun & never completes until the gun is void of any pressure.

Is this how all pcp regulators are designed or is there any regulators that incorporate some sort hysteresis in order to achieve a complete seal? Do they all gradually taper off the transfer between high & low chambers to such a small amount that we just view it as a "complete seal"?

Nietzsche

Fx dreamline barrel adapter and 2 transfer ports 22/25 caliber

Crown carbon fiber liner sleeve supports

Crown threaded shroud end

50.00 shipped

Jim here, retired here in Missouri from the Army (FT Lostinthewoods). I bought my first PCP at the end of November, it's an FX Maverick, I really love the quality and the way it performs! It has been fun to shoot and hunt with, the .25 cal puts a hurting on the squirrels, armadillo's and starlings. I am glad to have found this forum, there is a lot of great information and friendly people on here willing to help new members out! I am a member of another non air gun forum and it can get pretty brutal in there and I have not seen anything like that here.

Looks like I’ve found the problem, lol…

-Ed

Hello all,

I have the Sheridan pump that my dad gave me as a kid and I'd like to get it working. The main problem is that the bolt is missing. I remember it was the straight bolt, not curved.
I'm sure it also needs sealing.
Can someone point me to a place to find the right bolt and seal kit?

Near as I can tell from info on this site and youtube videos it's probably a late 50's/early 60's model? I took the stock off and the only info on it is "Sheridan Products Inc., Racine Wis--Made in U.S.A."
Would this make it a Blue Streak?

Thanks for any advise you can give,
Michael

2 custom Air strippers 6061 aluminum for 177/22 caliber. Both 3 inchs in length 1 inch in diameter. Both 1/2 20 threads Both work extremely well stripping off air if you are shooting slugs and or pellets.

Asking 110.00 shipped to your door for the pair. Or 55.00 each shipped Cost me twice that to have them made.

Has Air Arms ever offered the ProSport in either an ambidextrous or left hand stock? I have never seen a factory ProSport in anything that could be comfortably shot by a lefty like myself. Is there such an animal, or is this a white elephant?

Sold
FX MAVERICK SNIPER .30 CAL

9 OUT OF 10 IN CONDITION... I SUBTRACT "ONE" BECAUSE IT IS A "USED" ITEM.

$1200.00 - AS A COMPLETE KIT, minus the scope

If you want the scope and rings add $200. or $1400.00 With SCOPE and rings

BUYER PAYS 1/2 OF SHIPPING WHICH I ESTIMATE TO BE $40.00 IF YOU LIVE OUTSIDE OF THE CONT U.S. LAWS / RULES PERTAIN AND PRICE MAY INCREASE. I WILL NOT SHIP TO A LOCATION IN VIOLATION OF ANY LAWS.

I ONLY SHIP UPS FULLY INSURED AND SIGNATURE REQUIRED

SALE INCLUDES:

* DONNY FL SUMO MODERATOR
* K&L CHASSIS WITH REAR SLING ATTACHMENT
* 7 FX MAGAZINES
* 2 STUD MAG LOADERS
* OVERSIZED KNURLED HANDLE
* UTG RECON 360 BIPOD
* GREEN LIGHT WITH PRESSURE PAD
* HARD CASE

Also available for $200.00 more:
* BLACKHOUND 6-24X50 FFP/MOA SCOPE W/ SHADE, LEVEL AND CAPS

I AM BACKING THESE SALES WITH MY PERFECT FEEDBACK RECORD (OVER 88), THAT SAID THESE GUNS BELONG TO A GREAT PERSON AND GREAT SHOOTER @GulfCoastShooter SO YOU CAN BUY WITH COMPLETE CONFIDENCE KNOWING IT WILL BE PACKED CAREFULLY, DOUBLE BOXED, INSURED FULLY AND WILL REQUIRE A SIGNATURE UPON RECEIPT! WE WILL LEAVE YOU POSITIVE FEEDBACK AND REQUEST THE SAME.

I WILL ACCEPT:
PAYPAL FF OR ADD 3.5%
ZELLE
VENMO

IF YOU WANT TO SEND A CHECK OR M.O. IT MUST CLEAR THE BANK "COMPLETELY" BEFORE WE WILL SHIP

YOU CAN CONTACT ME VIA:
EMAIL: [email protected]
TEXT: 251-610-8582
SCAMMERS WILL BE IMMEDIATELY FLAGGED AND REPORTED

SOLD = FX WILDCAT MK III BT SNIPER .25 CAL

9 OUT OF 10 IN CONDITION... I SUBTRACT ONE BECAUSE IT IS A "USED" ITEM.

$1300.00 - AS A COMPLETE KIT WITH SCOPE AND ALL ACCESSORIES LISTED BELOW
$1100.00 W/O SCOPE
BUYER PAYS 1/2 OF SHIPPING WHICH I ESTIMATE TO BE $40.00 IF YOU LIVE OUTSIDE OF THE CONT U.S. LAWS / RULES PERTAIN AND PRICE MAY INCREASE. I WILL NOT SHIP TO A LOCATION IN VIOLATION OF ANY LAWS.
I ONLY SHIP UPS FULLY INSURED AND SIGNATURE REQUIRED

SALE INCLUDES:

* IMPULSE AIR 1350 MODERATOR
* ATHLON ARGOS BTR GEN 2 8-34X56 SCOPE
* SABER TACTICAL BOTTLE CLAMP
* 3 FX MAGAZINES
* 1 STUD MAGAZINE
* 2 STUD MAG LOADERS

I AM BACKING THESE SALES WITH MY PERFECT FEEDBACK RECORD (OVER 88), THAT SAID THESE GUNS BELONG TO A GREAT PERSON AND GREAT SHOOTER @GulfCoastShooter SO YOU CAN BUY WITH COMPLETE CONFIDENCE KNOWING IT WILL BE PACKED CAREFULLY, DOUBLE BOXED, INSURED FULLY AND WILL REQUIRE A SIGNATURE UPON RECEIPT! WE WILL LEAVE YOU POSITIVE FEEDBACK AND REQUEST THE SAME.

I WILL ACCEPT:
PAYPAL FF OR ADD 3.5%
ZELLE
VENMO
IF YOU WANT TO SEND A CHECK OR M.O. IT MUST CLEAR THE BANK COMPLETELY BEFORE WE WILL SHIP

YOU CAN CONTACT ME VIA:
EMAIL: [email protected]
TEXT: 251-610-8582
SCAMMERS WILL BE IMMEDIATELY FLAGGED AND REPORTED

Sold
FX IMPACT M3 .22 CAL SNIPER

9 OUT OF 10 IN CONDITION... I SUBTRACT ONE BECAUSE IT IS A "USED" ITEM.

$1450.00 - AS A COMPLETE KIT WITH ALL ACCESSORIES LISTED BELOW

OR $1650.00 WITH SCOPE = BLACKHOUND 6-24X50 FFP / MOA SCOPE add $200.00

BUYER PAYS 1/2 OF SHIPPING WHICH I ESTIMATE TO BE $40.00 IF YOU LIVE OUTSIDE OF THE CONT U.S. LAWS / RULES PERTAIN AND PRICE MAY INCREASE. I WILL NOT SHIP TO A LOCATION IN VIOLATION OF ANY LAWS.
I ONLY SHIP UPS FULLY INSURED AND SIGNATURE REQUIRED

SALE INCLUDES:

* DONNY FL FX MODERATOR
* K&L ARCA RAIL
* FX MAGAZINE
* REAR WIKA GAUGE
* HARD CASE

ALSO AVAILABLE * BLACKHOUND 6-24X50 FFP / MOA SCOPE FOR additional $200.00

I AM BACKING THESE SALES WITH MY PERFECT FEEDBACK RECORD (OVER 88), THAT SAID THESE GUNS BELONG TO A GREAT PERSON AND GREAT SHOOTER @GulfCoastShooter SO YOU CAN BUY WITH COMPLETE CONFIDENCE KNOWING IT WILL BE PACKED CAREFULLY, DOUBLE BOXED, INSURED FULLY AND WILL REQUIRE A SIGNATURE UPON RECEIPT! WE WILL LEAVE YOU POSITIVE FEEDBACK AND REQUEST THE SAME.

I WILL ACCEPT:
PAYPAL FF OR ADD 3.5%
ZELLE
VENMO
IF YOU WANT TO SEND A CHECK OR M.O. IT MUST CLEAR THE BANK COMPLETELY BEFORE WE WILL SHIP

YOU CAN CONTACT ME VIA:
EMAIL: [email protected]
TEXT: 251-610-8582

SCAMMERS WILL BE IMMEDIATELY FLAGGED AND REPORTED

The Vixen was a tack driver without much pellet searching for me anyway, but after owing the V3 .30 I realized how little information AGT publishes about their barrels compared to other manufacturers.
Being a .3063 and finding vids and slugging myself I found it difficult to find slugs that worked until Stephen Bianchi ( AVS) started his quest for a slug for the .3063 of the V3 .30 and everyone with one of the V3's had a good option.
But why is AGT silent on the barrels they put in their excellent airguns?
In fact their is so little published by them on the net about the airguns specs they make, that it's downright weird.
Being such good airguns you would think they would have at least a detailed list of specs comparable to some of the much less accurate or expensive offerings out there.
But after several years of occasional searches, I still only see bare bones descriptions of their offerings anywhere I've looked.

Does anyone have an answer as to why they publish so little?

If anyone has a spec sheet published by AGT themselves, could you share the link?

Have a M3 I bought in Dec of 23, has huma slug kit installed, bullet central tungsten hammer and 800mm tensioned slug barrel installed. Will include the original barrel kit too and moderator for $1500 tyd. If you want the .357 Yokozuna moderator added, $1650 tyd shipped. Include the Helix 4-16 ffp scope with no limit rings, $1850tyd. Will negotiate on price alittle. I’ll throw in whatever hybrid and pellets I have, 3 and a partly sleeves of hybrid slugs and 4 cans of jsb and 4 cans of hades pellets

New member to the forum- Kenny- from Bama, had brake barrel type air rifles most of my life, wanting to get into PCP air rifles and up my game, have been researching the Hatsan Factor BP Bullpup QE Side lever action, thinking about the .35 cal. , would be a great help to get any input from anyone who has one, or has any experience with one, positive, or negative input is welcomed, and do you prefer the .30 , or .35 cal. , thanks, glad to be aboard on the forum, looking forward to learning all I can. https://www.sports-and-gadgets.com/...uded-wearable4u-bundle?variant=43845803376855

I have a stock that’s broken at the wrist. I understand the mechanics of repairing my self, however, I get flashbacks to building model cars when I was kid…..glue everywhere. Anyway, can anyone recommend someone to repair this?

Anybody know a place that buys air guns in Southern Califonia? I know of TOP GUN in Orange County but they low ball you pretty bad. I have a *MOD EDIT- Product removed* and I don't know the best way to do that locally and if thats even an option.

Anybody knows a revolutionary new design on pellet probes repurposed for shooting slugs?
Just asking have too much time on my plate, winter is here in Canada....

New and clever design. Watch the video on our biathlon target page to understand how these work. If you've been wanting a target that brings a unique challenge to any shooting range, this is what you need.​

Limited numbers left in 3/16 thickness, fist come first served.​

Code BIATHLON-10-OFF SAVES ADDITIONAL 10% ACTIVE NOW​

See our entire selection of rimfire air gun targets.​

Looking to get a second PCP rifle and have narrowed it down to these 2....I think. I bought a BRK sahara XR and have totally loved it, so I'm a bit biased towards BRK. I'm a sucker for traditional stocks and the King looks awesome. Both of them weigh about the same, the Ghost seems less complex and easier to work with as well as less complicated to work on. The King has a higher shot count. I'm not really interested in shooting slugs. I'm not too sure on which one is considered more accurate, that could be a toss up.

Also to note, the RAW HM1000X was on my radar, but a shot count of 60 is just too low for what I want. If you were to pick, which would you choose? Any cons to either that I'm not aware of?