I purchased my FX Wildcat a couple months ago and have been enjoying it since I bought it. Actually this is my 3rd Wildcat. The first was a .22 gen 2 compact I eventually gave to my son. The second was a M3 sniper .25 I traded in for the M3 Impact. All 3 have come from the factory with phenomenal performance straight out of the box. I really missed my Compact Wildcat, so I decided to get another. When I say phenomenal this is what im talking about. As much as I'd like to take credit for the tune I haven't touched the settings on this gun. It shoots dime size groups @ 50 yards when the wind Gods are favoring me. This is a magazine (18) The chrono didn't record 1 shot. I get 3 mags(54) shots on a 225 bar fill on reg. .22cal 18gr JSBs

Here’s a little old school cool to show off. This is a Huntsman Midas MKI in .22 that was made from 1983 to 1992. It has a fill pressure of 3k psi, but to operate in the "sweet spot”, I fill to 2300 psi. I get about 50 good shots in the 15 ft. lb. range. I believe these first Daystates used BSA barrels which are pretty dang good. I hadn’t shot this for quite awhile, but I think I’ll put it back into rotation for a bit. I just need to figure out which scope I want to use.

Selling this nice colored walnut stocked TX with custom brass trigger guard and scope. Note the striping on the stock. Has a single small dent in the stock behind the cocking lever slot but no marks on the metal that I can see. Very close to perfect.
Scope and shipping are included. I will ship the action out of the stock and scope off, all padded to keep the package short.
Thanks for looking,
Bob

I use this gauge assembly when I want to shoot tethered to one of my tanks. Today I discovered the cap that keeps the oil inside had come off of both gauges and the oil was all over the regulator and a bunch of other stuff that I kept stored in the same drawer. Do you think any oil seeping into the regulator would affect it's performance? Are gauges typically filled with mineral oil, and all I need to do is fill them back up enough to cover the gauge needles?

Less than six months old comes with three magazines, magazine holder. This gun is extremely accurate tune for 18.13 JSB‘s quarter inch groups at 80 yards sparrow heads shots at 60+ yards absolute incredible accuracy and shot count.. purchased brand new from Ed Gunn West. The only reason for selling is just bought a brand new L2 22 Ed gun I really don’t care if I sell this or not this gun is absolutely incredible. Will come in original high-quality case and boxed shipped insured and signature required. Thanks for looking. You can check out my reviews. They are stellar.

$1550 shipped to your door. conus
bipod scope,mount, moderator are not for sale.

More gadgeteering from the dark recesses of accumulated stuff...and my sketchy old memory.

Back in the day, Robert Law at Air Rifle Headquarters in WV commissioned Williams to make airgun-specific peep sights. These were similar to today's FP and GR series, but with fixed mounting rails mating with each brand's dovetail spacing. They are secured by setscrews on top, to snug the sight up tight against the grooves.

This is the "ARH 624," a sporting peep sight (Weihrauchs had wider 13mm grooves back then, so the ARH peeps are a rare alternative to HW's own match diopter of the day). Seen here on an old HW 30:


And here on a vintage HW 50 is the "ARH 834T," the target version of the same sight, adding finger-knob adjusters and a taller elevation arm.


Next, a challenge - a BSF S54 Match underlever. This eccentric design has: A) relatively low front sight; B) barrel set below the top of the receiver; and C) high rail for the rear sight...so any rear-mounted sight must adjust VERY low. BSF's match diopter works of course, but is fragile, adjusts coarsely, and doesn't take German eyepieces! ARH also had custom Williams sights for BSF barrel-cockers, but they won't go low enough for the S54. The one sight that WILL go low enough is the current FP-GR, but its tall elevation arm strikes the gun's wood (note: the FP-GR may work as-is for those versions of the S54 with narrower stocks).


The solution was a mix'n'match. The base is from a brand new FP-GR, with the shorter top from an "ARH 833T." A tidy setup, with the bonus of better precision than the OEM sight.


And a surprise bonus...the other half of each sight was not wasted. The 833T's rails are about 11mm, so its base plus the FP-GR's top gives a 1980-vintage HW 35E (with 22-inch barrel) a sight radius that's almost silly.


Here is the whole motley old crew with their new "eyes," ha.
Here

I cannot find where I can add an item for sale on the classified forum I just joined a couple of days ago.
Thank you
Steve Armstrong

Code : WARMER

Need a good backpack gun the Katran SC hits a lot of the check marks.

Is there anything else that is just as short, good ergos and around the same price?

This is my Walther LGU Master underlever, spring piston rifle in .22. The Walther LGU Master was only made from 2015 to 2017, but the .22 version was only made in 2015. Overall, it is in stunning condition, fully functional and very accurate. This is a European 16j model (12 ft. lbs); I've attached a copy of a ten shot string from today that shows an average fps of 537 with JSB 15.89 gr. pellets (see pics). Price is $850 OBO. Shipping is free to the lower 48. Payment by USPS money order, or Certified Bank Check. If you have a lot of positiver feedback and/or a strong forum presence, I’ll take a personal check.

A Snowpeak M60B was my first airgun, the more powerful MAX1 has been a teaser for many for a while now and the picture of the shot show the first time i've seen it spotted 'in the wild'. But what about those new AP models? Does anybody know a bit more about them?

14" barrel NP-03 breech and cut down the factory stock. Dual front bottles and a rear. Will end up with probably all three bottles being 300-350cc Carbon Fiber to keep it light and 1000cc is still plenty of air. This is in .177 slinging slugs right at 950fps. Just a mock up still a little stock work to finish.

Niksan Elf-S Bullpup .22, includes 4 magazines, factory hard case, probe, tools, O-ring, forearm grip with push button bipod deployment and manual all like new condition, less than 100 shots through it. The original owner won it NEW at an airgun event and fired one magazine to verify function, I fired 4 magazines through it with 4 different pellets. I decided to stick with my Beeman 1358 bullpup. See review link in last photo. -- $285.00 Shipped -- PayPal Friends & Family, (add $15.00 to cover fees if PayPal as purchase), or USPS Money Order. Trades or partial trades possible *** send a picture of what you have to trade *** I do not want breakbarrels.

I was doing some rats shooting this evening and I managed to tag one. Probably 15 minutes later I scanned the area for more rats and the dead rat had disappeared. My initial thought was the barn cat or owl had taken it so I didn't pay much attention to it. Another 15 or 20 minutes passed, I scanned the area again but this time I was using my handheld night vision unit instead as it was much easy to just scan around for targets.

Well, a coyote appeared in my scope view and I almost sh!t myself as I didn't expect to see one. I tried to switch to my gun but my movement had scared it away. The coyote was only 30 yards away. Yup, expect the unexpected next time out. What a missed opportunity.

Ok guys I made my mind up im ordering a Impact m4 600 mm in .30 cal what are some good pellets to start out with. Thanks. I have never owned a .30 cal pcp alot of .25 and .22 but never a fx or .30 can't wate lol

This looks interesting...

Hello, I have 2 M3 Impacts and have decided to put one up for sale. This is a .25 caliber with 600mm barrel. It has the Airmarksman backbone 30MOA rail. Tungsten Hammer Weight and power springs installed. It has the K&L extended Picatinny Hand guard. Comes with 2 .25 caliber mags, bipod, and Donnyfl FX moderator. Just for the purpose of the sale I have put a brand new Westhunter 6-24X50mm Illuminated FFP scope on. It's brand new, you'll need to sight it in. I had it tuned to 22 cal slugs so you will probably want to set it to your preferences. No issues with the rifle. I love it but can't shoot 2 at the same time and need to let it go. Hardcase included. Asking $1,700 with the scope and $1,550 without the scope. Feel free to reach out by call or text to Brett Williams - EliteAirCustoms (870) 450-8479.......PayPal payments only. Goods and services add 5%. Shipping is included in the price. Thanks for looking

posted this in the wrong section earlier

i made an order for ammo earlier this week from AoA bit to my surprise, my bank account shows the transaction but i don’t have a the package nor a confirmation email.
can anyone here help

Want to sell fx 700 drs synthetic 22 cal one small mag and 2 qd fox 3d printed mags ,angle manometer 650.00 shipped just put in a new valve and seals and didn't touch the reg it wasn't leaking its set 145 bar
Paypal fandf or pay 3 percent fee
Thanks

Latest addition has me thinking maybe I'll sell my drs just picked up the delta wolf from a friend is there a way to tell if it has the ultra valve or whatever the latest and greatest valve is it's probably 1 1/2 years old some where in there and a 25 cal

Selling my GX CS-4 compressor. Ask anyone - this is perhaps the finest small, portable compressor on the market. This one works flawlessly and includes the original box, manual and parts kit. I've also added a temperature gauge and an hour meter which currently shows 58.6 hours. Always used and stored indoors. Grease pot is full of brand new grease. Only selling it because I broke down and bought myself a Coltri MCH6 ICON compressor as a Christmas present to myself! Currently selling on Amazon for $589 - $70 "Coupon" = $519 with free Prime shipping - but of course they do charge sales tax - so a new one would probably cost north of $550. I'm asking $375 shipped to your door. No lowball offers please. CONUS only. Prefer PayPal F&F or you pay any extra fees. Will consider other legitimate forms of payment.
See it here including photos and specifications:
https://www.amazon.com/GX-Portable-...&qid=1737759093&sprefix=gx+cs4,aps,124&sr=8-1

After a few hours use my M3 .22 cal developed wild velocity inconsistency and after hours of searching forums for advice found the problem to be what I believe to be referred to as the C-1 Top Hat, it was freely turning on the valve rod which it's NOT supposed to do being set from the factory. This changes the proportional value between the valve spring adjustment and hammer spring resulting in severe tune inconsistency. HAS ANYONE had to deal with this problem, is it common on the Impact design? Took multiple attempts using calipers and red loctite to get it reliably set at 6mm.

I have a inline moisture filter for my pump. It currently has the tubular cotton filters in it. Can I just remove them and pour in some of the replacement moisture media? I'm guessing I would need to to leave one of the tubular ones in at the inlet and one at the outlet side to keep the beads in place?