I ordered some jewelry for my wife and two airguns showed up.

10 days of being a member and 10 post to message in classifieds? Here's my first boring post.

Newbie here - planning on a B-mod and will mainly shoot between 20 - 70 yards and was thinking about a Genesis 6-24x50 FFP $204 delivered Occasionally maybe longer. Is this a bad idea?
Not sure where my path will go, but did not know if this is overpowered?

Anyone know what attachments are needed for the Benjamin Marauder.
Any other scope suggestions would be great.

I used to have a not so different 130 when I was a young buck. It put it's share of frog legs on the table in it's time. Somewhere along the line I must have given it away as I haven't seen it in years. Then while browsing the net last week , I spotted this Custom 1377 classic. It was reported like new, with a upgraded trigger but I was especially smitten with the furniture. It got here yesterday and I got to put the first pellet's through it today. I'm really liking the overall feel of this one. (Much better than the old plastic griped versions I've handled.) I have to say, it did better across the radar than I thought too. The second picture shows average velocities obtained using a 8.4 gr wadcutter pellet. In most cases there was only a 2-3 fps S D acrross 5 shot strings

I've been so busy this last week hunting and running around I almost forgot to post this! Lol
My custom .45 Piledriver shooting NSA 298 grain knurled hollow points at about 825 for the first shot! It's a shooter
43 yards on the buck and 50 on the doe. Both only went about 30/40 yards and DRT!

NIB old stock, .177 Gen 2 Synthetic Marauder.
Bought for an old project and never got around to it. Is NIB and ships in its factory double box.
Asking $330 shipped CONUS, PayPal preferred.

i have a talon p in 25 cal that i bought from midway USA last month. This gun is pretty much brand new. Have shot less than a tin of pellets through it. have the original box with the warranty card still in it. I am selling to save up for a huben. Also am willing to trade for huben gk1 and will throw some cash on top. I dont have a lot of feedback on here but i am willing to go through what ever steps necessary in order to sell. that includes video call with my license info on hand. asking $300 and you pay shipping. only shipping in USA or meetup in MA or NH. Any questions feel free to pm.

A ram a zon $200 compr

Air marksman 700cc carbon fiber bottle, 2023 mfg date. No issues. Sell for $250 shipped with no valve or trade for 300cc fx bottle

Folks at home.... I've got a smashing good deal for you!!

30 Cal FX Wildcat MK3 VP
600mm Barrel
**Aluminum tank swapped for 480 carbon**
Synthetic Stock
2 Mags
DonnyFL Ronin
Bushnell Tour V4 Rangefinder

Price: $1300 $1200 (shipped from KS)
Payment via PP FnF (or add fee)

Incredible shot string (see pics)

Feel free to ask questions! Check my feedback. You'll always be happy with my sales.

*SCOPE NOT INCLUDED*

10 unopened tins of JSB 10.3 $150 shipped conus. They will packed in foam the correct way. Paypal

I have boiled it down to one of those two rifles for my first PCP. Which one would you say is better overall. I do mostly plinking but i see more hunting in my future.

I got another squirrel this morning about 7:30am. It was a little over 30 yards away on the ground looking for acorns. I used my P35-177 shooting H&N baracuda match 10.6 grain pellets a little under 900 fps. The pellet hit this 14 ounce male behind one fro t leg and went out behind but closer to the other. He only went 5 or 6 feet but it was through a fence I had to go over to retrieve him. Most of the 16 I've taken with this gun have been DRT but not all.

Dont need to say too much. I think everyone knows this world most beautiful spriner air rifle.
She is working all fine and Im asking $750 shipped.
Thanks

Anyone here owned one of the Brocock Sniper XR's ?
I did a search, but didn't find answers to my question.

Looking for your overall feelings of the gun. Actual owners thoughts. Not what I can read myself.

Anyway, my thought is to do the..."opposite"...as many do with pistols. Rather than add a full length stock to a pistol, I'm thinking of cutting the barrel to the same end length as the 300cc cylinder.
Not attempting to try to make it into a "bullpup". just making a...short rifle. And yes, I understand that overall power will drop with the short barrel.



Thanks for your thoughts (on the gun...or...my hairbrained thought !).

Mike

27 UNOPENED tins of JSB Exact Jumbo Monster Redesigned 25.39gr. 200ct. pellets. 24 UNOPENED tins of FX 25.4 gr. 350ct. pellets, and 7 UNOPENED tins of JTS Dead center 25.39gr. 200ct. pellets for sale. $300 FIRM that's $5.17 per/tin. (LOCAL pick-up or meet & drop ONLY) NOT interested in trades, NOT interested in shipping, (would get hammered in shipping cost) Not interested in breaking up the lot. Located in central Ma. would be willing to drive up to 30 min. to meet if interested.
Thanks for looking.

Curious... What is the power output of your rifle(s), and why?

- Get as close as reasonably possible to that 20 fpe limit for trajectory or to shoot a heavier, higher BC pellet?
- Keep it low (say 11-13 fpe?) to be more forgiving (for lack of a better term)?
- Let the rifle tell you what power it wants (most accurate)?

Don't own a piston rifle (long been on my "roundtuit" list) & know only what I've read about them; beg pardon for any baked in assumptions evident in my question.

Under factory warranty

-FX Panthera in .22 700mm barrel with a "RPG" rail, absolutely no torque with this rail, much better than the original FX rail, PRS/NRL version of the FX Dynamic
-1 "AFFIXED" Altaros Moderator in .22, sounds awesome
-3 different types of rear bag rider
-1 stock magazine, 1 after market one
-1 spare FX gauge
-2 aftermarket single shot loaders
-1 custom safety flag made for the panthera
-1 Hawke ring mounts

this cost me about $2500 selling for $1390 shipped.
everything will be shipped in original FX box and FX rifle case

5% Sale across the board..
All Impacts shipped with two magazines.
Free shipping on rifles.
Big sale on Panthera, Dynamic, and DRS.

FX Airguns, FX Accessories for high-powered air rifles

World renown airgun shop for high power air rifle products and accessories.

talontunes.com

View attachment 515543

In our official online shop! To use it, simply visit our official website and select ‘Shop’ from the drop-down menu. Then add the code 𝐃𝐀𝐘𝐁𝐅𝟏𝟓 and you’ll enjoy a 15% savings on each and every product you’ve put in your basket!

𝐵𝑢𝑡 ℎ𝑢𝑟𝑟𝑦! 𝑌𝑜𝑢𝑟 𝐵𝑙𝑎𝑐𝑘 𝐹𝑟𝑖𝑑𝑎𝑦 𝐷𝑖𝑠𝑐𝑜𝑢𝑛𝑡 𝐶𝑜𝑑𝑒 𝑖𝑠 𝑜𝑛𝑙𝑦 𝑣𝑎𝑙𝑖𝑑 𝑢𝑛𝑡𝑖𝑙 𝑚𝑖𝑑𝑛𝑖𝑔ℎ𝑡 𝑀𝑂𝑁𝐷𝐴𝑌 2𝑛𝑑 𝐷𝑒𝑐𝑒𝑚𝑏𝑒𝑟!

I recently bought a used barrel for cheap, previous owner wanted to get rid of it cause “it doesn’t shoot right”. It being a Ghost barrel (23 inch) and given how cheap it was I thought how bad can it be and got it. Gave it a deep clean and slapped it on the rifle, shot like a laser. One hole groups at 50y and 5/8 at 75y. For around 70 shots, then it turned bad, poi wandering around and 1.5-2 inch groups at 50y. Clean, repeat, same result. Looked into the barrel with a bore scope and felt like I was standing in Versaille’s mirror room. Someone polished the barrel with a mirror finish, not sure whether it was the guy I bought it from or the previous owner of the gun. Anyway, given how good the barrel is shooting before fouling I want to save it if possible, here’s my plan:

1. Scrub with brass brush and kroil
2. Aceton patches to get rid of whatever may be in there.
3. Patches with kroil to clean, let the kroil sit, dry patches
4. A few strokes with bore mop and 600 grit diamond paste, like 5 strokes max along the barrel, to rough it up a bit
5. More kroil patches, let it sit
6. Clean with ballistol, dry patches
7. Wax with renaissance wax

Interested in what people think whether this might help (or not). Never had to “save” a barrel other than a good cleaning… maybe the barrel gurus can chime in and keep me from making a mistake @Motorhead @nervoustrig @Firewalker (sorry for the unsolicited tags and thanks in advance!

I have a DRS Classic 22 700 that I really don't like the synthetic stock.

So I have been looking for a chassis or a fully adjustable laminated wood stock.

And it looks like there will be barreled actions of the DRS base/classic



And the DRS Pro



So then you will be able to order either walnut stock





Or synthetic stock.



There are a few after market companies that are making chassis for the DRS.

The Aeron CZ isn't available in the USA, but I do like the ability to use any AR buttstock that you prefer.





The Saber Tactical chassis looks like it will be light weight, but doesn't have any length of pull adjustment.
They should offer an adapter to add an AR buffer tube so we could use any buttstock we like.



Then there is the Delta Force chassis, this one is trying to complete against the MDT Elite Chassis.
It looks nice but spendy!



I have contacted MDT to see if they will be making any of there other chassis for the DRS, as of now they have no plans.

A GRS stock would be nice for the DRS but as of now they don't plan on making one.

As I was writing this I found the Form stock at Pyramid Air


Doesn't look like it has length of pull adjustment though.
I will have to email them to find out for sure.

The one I like best is the Aeron CZ tactical, but it's not available in the USA.

The Form almost fits the bill if there is length of pull adjustment