N/A What's more important to you Max Power or shot cycle?

[Mycapt65]

I ask because I have weighted late model Hw95K 22 barrel from a HW95 field pro I bought a couple years ago. Depending on the gun the barrel makes about 1-1.5 fpe less than it should for reasons unknown to me. That's on any gun I put it on, so there's definitely something up with this barrel. The barrel is still very accurate on any rifle I put it on. It doesn't seem to hurt the rifles shot cycle at all. It just annoys me that its not making full power. I don't need it for pesting should I just get over it and use it? What would you do with it?

 

[JEFFPPC]

Max power and springer don't go together relating to springers in my thought process. But a smooth shot cycle is a joy. My LGU feels like a needle going through warm butter.So to answer your question, get over it.

 

[Gear_Junkie]

You just need to balance for what you need/want. For me, shot cycle was/is more important. I tuned my HW50 to about 10fpe. It's a pleasure to shoot and accurate out to 55 yards for FT. My full size underlevers (HW77, HW97, AA TX200 MkIII) I tuned to 11-12fpe mostly for shot cycle. I feel like it made them easier to shoot accurately.

 

[Hobbyman2007]

I’ll take , what is shot cycle for 500$ Alex.

I do like a rifle that produces some down range power but if it feels like I’m shooting a 12 ga . It needs a tune. I have an R9 that originally put out close to 17 fpe , had a bad twang and buzz. And was a little harsh. I promptly put some macarri internals , clipped a coil from the mainspring, made up some guides and now shoots great at 14FPE.

 

[EMrider]

I've always gotten better accuracy by de-tuning my guns from factory specs, and they are more enjoyable to shoot that way too. 12fpe or less for hw97k, pro sport, hw95, and 10-10.5fpe for my hw50s. The only exception to this rule has been my R7/hw30s, which have always been very accurate at factory power of about 7fpe. For hunting, the emphasis on power is often misplaced IMHO. Accuracy is more important, and 10fpe is plenty for small game out to 35yds if the shot is on target.
R

 

[boscoebrea]

it should not bother you; get over it.that is my opinion,shot cycle is more important,I have powerful springers I grab when needed ,but for everyday fun I grab my kitted mellow cycle springers.

 

[6gun]

I will get this out of the way, I don't like springers because I haven't had a high end one.

That said, shot cycle because if its nice to shoot it will usually stay out of its own way for accuracy. "Max power" has become the realm of the pcp now anyhow so I'd focus on making a springer a really enjoyable thing to shoot for long periods and something beautiful to look at. If this means projectile choice, whatever groups best.

 

[Sawney Bean]

I will get this out of the way, I don't like springers because I haven't had a high end one.

That said, shot cycle because if its nice to shoot it will usually stay out of its own way for accuracy. "Max power" has become the realm of the pcp now anyhow so I'd focus on making a springer a really enjoyable thing to shoot for long periods and something beautiful to look at. If this means projectile choice, whatever groups best.

It's hard to feel any love for a crappy gun of any variety. At best they're functional and utilitarian.

I don't think the pursuit of power should be confined to PCP's though. You can apply the same logic to powerful PCP's and say, "why not just get a powderburner?" From a cost/performance standpoint they make way more sense, but you get a big bore PCP because you want power and something about shooting things with air appeals to you. It's the same thing with powerful springers. Sure a PCP could do it better, but there's just something about a spring piston gun that appeals to a lot of us. I'd personally love to see some company come out with a 40+ fpe springer even if a PCP can easily achieve the same power. A 9mm, 50 fpe springer that kicks like a mule would still be super cool and I'd buy it as soon as I had the funds available.