I have a .22 cal Maverick set up to shoot 18.1 pellets at 890 to 900. This issues is the regulator replenishes the plenum very slowly. I have installed Wika gauges to better monitor the issue. FX said it was a bad plunger in the second regulator so I had it replaced. The first regulator is set at 140 bar and the second at 100 bar and I get 215 shots per fill. My question is if I set the first regulator higher, say 150 bar, will the second regulator fill the plenum faster and more consistently? I think if I put a digital regulator in and shot to the numbers the SD would drop significantly. I would say the fill rate between shots is 15 to 20 seconds. Thanks.