Have had my 30 cal Epoch about 2 months and very satisfied with how she shoots pellets. Dime size groups all day at 50 yards at 910 fps with 45 grainJSBs . Can hardly wait for Skout to produce a slug barrel for it.
Skout Skout Epoch
- Thread starter shamu
- Start date
Have an @ 26 month old EPOCH purchased with the aftermarket 35" .30 barrel in the a plated alloy configuration ... it too is that accurate !!
Crazy after all this time and barrels SKOUT has played with they have nothing currently in the long barrel set up for the caliber
Crazy after all this time and barrels SKOUT has played with they have nothing currently in the long barrel set up for the caliber
Upvote 0
Thanks for posting Shamu, I have bought a used Skout Epoch and have had it for one week now. I appreciate you posting your tune. I have long and short barrels. And will see what I get when I try your tune. Do you know what your dwell is set to. Also what pressures are you running in the hi/low regulators. TIA. Dave
Upvote 0
Hi shamu,
i was wondering what kind of chronograph numbers you are getting from your tune?
I have seen LPR settings from 8-13 percent of the HPR settings, but your's is the the lowest I remember seeing ..i don't remember that much
Thanks
Mike
Upvote 0
Is it the 28 inch LW- This is the upgrade I see when I look at Skout 's website when ordering an Epoch. Thanks for your response.
Upvote 0
Yes, 28" LW latest upgrade.
Shot 5 shots tonight, 44.75 JSB
912
911
915
905
909
Gauge pressures are pictured.
Shot 5 shots tonight, 44.75 JSB
912
911
915
905
909
Gauge pressures are pictured.
Upvote 0
in order to get the fps you are getting I have my low at 140 the high is at 1377--95 bar my dwell is 26. Skout recommends 880-920 fps 1700 hp, 160-190 lp, Dwell 23-28. I am curious if you know what is best to chase. FPS or regulator pressures and let the fps fall where it may? I'm guessing chase the FPS and fine tune accuracy with the dwell setting.
Upvote 0
I believe that fps is the controlling factor and maybe tweak the dwell. My gun was at Skout in PA last month and came back set up as pictured
Upvote 0