So I dropped my avenger and it land just right to break my side lever (cocking lever) does any know where I can order a new one .Thanks in advance
Tuning Side lever for Avenger
- Thread starter Yote
- Start date
I believe they have part numbers for them except For the the most important part needed which is its poppet and a call to Air Venturi or PA should do.
Maybe you can epoxy it for now.
Maybe you can epoxy it for now.
Upvote 0
G
Guest
Guest
Epoxy sand and repaint over the seem. 4500psi epoxy won't break again if you mix it well. It will probably last beyond the life of the gun and will look good!
@Odoyle is right. Plus there is no shipping costs or wait time
Upvote 0
if you know someone who has a 3D printer, maybe they could print a temporary one for you, ?
Upvote 0
.unfortunately it broke on the pivot pointMight try this place: [email protected]
They do have some parts guns.
Or you could probably make a new hinge to attach to the lever.
They do have some parts guns.
Or you could probably make a new hinge to attach to the lever.
Upvote 0
I broke one of the ears off of the charging lever first time out. This is the point that the side lever connects to the link. I don’t believe it to be an inherent flaw. I contacted PA and they directed me to contact AV at [email protected]. I got an acknowledgment that I was in the system. I’ve been burning powder for sixty-two years and watched every major air gun channel for about a year and got the bug.
Upvote 0
This thread might be of use to you...
https://www.airgunnation.com/topic/air-venturi-avenger-parts-diagram/?referrer=1
https://www.airgunnation.com/topic/air-venturi-avenger-parts-diagram/?referrer=1
Upvote 0