Tuning Air Venturi Avenger Parts Diagram?
- Thread starter brian_null
- Start date
I have some, just trying to figure out how to drop them here. They are on my "clipboard" on this phone but can't figure how to get it here. Working on it!
Upvote 0
+1 to you for finding it.
WHY!!! IS THERE NO PART NUMBER FOR THE MOST NEEDED REPAIR PART #6 (air release valve stem) (poppet) which happens to be THE MAIN POINT OF FAILURE???
WHY!!! IS THERE NO PART NUMBER FOR THE MOST NEEDED REPAIR PART #6 (air release valve stem) (poppet) which happens to be THE MAIN POINT OF FAILURE???
I sent text to "Dark Charisma" was told he is working on a valve for it. I guess he hasn't got any parts together yet but I am in line, I hope!
Bruce
Bruce
Upvote 0
Thx for posting. I was looking for this a few months ago, to compare to the Liberty. It looks like they are showing the ID on the O-rings, vs the OD with the Liberty. I still have a bunch of too big O-rings. 
As far as the poppet goes, they are still the soft material. The Avenger poppets should last a little longer than the Liberty. The valve seat rim is wider. The Liberty was very thin and didn't take much to imbed too deep and the metal can hit the valve. Maybe someday it will be delrin, and can get rid of the can.
As far as the poppet goes, they are still the soft material. The Avenger poppets should last a little longer than the Liberty. The valve seat rim is wider. The Liberty was very thin and didn't take much to imbed too deep and the metal can hit the valve. Maybe someday it will be delrin, and can get rid of the can.
Upvote 0
I don't own an Avenger, but thanks for the upload! Strange how hard it can be to find documents like that and especially as good as this one seems to be. Crosman STILL has not released a truly good diagram of the Fortitude. I have one, but it is VERY hard to tell much about it at a detailed level because the resolution is so low.
Thanks again!
Upvote 0
Anyone know if the QB78 valve and seal work on the Avenger or Liberty for sure Roy at Mountain Air Customs sells them in Delrin and Teflon for $18 each.
http://mountainaircustomairguns.com/faq/
http://mountainaircustomairguns.com/faq/
Upvote 0
DUY is the guy to talk to for a great peek poppet replacement. He also does other machining and modifications.
I went with a DIY approach, using the existing stem and replacing the soft gunk with delrin. Note: there are dim in this thread that you can see if the QB poppet can be used for a replacement.
DIY Liberty Poppet Mod
I went with a DIY approach, using the existing stem and replacing the soft gunk with delrin. Note: there are dim in this thread that you can see if the QB poppet can be used for a replacement.
DIY Liberty Poppet Mod
Upvote 0
Thank you also for the parts schematics. I have a question, though, on certain O- Ring call outs. What is a type “JSR” o- ring? I have a feeling the JS stands for Japanese Standard but not sure about the R.
Any O- Ring professionals out there than can hold class?
Any O- Ring professionals out there than can hold class?
Upvote 0
Looking at the page properties, You may need a MS Excel reader to open it. 2007 to be exact, but the newer should revert if needed. Odd, usually Adobe takes the hit on these.
Lots of Office programs out there to download without taking a beating from MS.
Hope this helps
Upvote 0