Just got my Airmarksman Ace slugs

[Impact701]

FedEx just delivered my Airmarksman Ace slugs.

This is the 1st 10 shot group at 50 yards from my DRS Classic 22 700.

I have it set up shooting the H&N 34gr Heavy slugs at 975fps. I did not change any settings to shoot the Ace 40.1gr. slugs, they were going 937 fps.

After 5 sight in shots this is the 1st 100 yard group in gusty 12+ mph wind. I held .2 mil to the left for wind.

#7 was shooter.
The hole in the target is ⅞ of an inch.

Hopefully Airmarksman comes out with a high BC Boat Tail Hollow Point for hunting.

I am going to adjust my rifle to shoot them a little faster.

So far I really like the Airmarksman Ace slugs.

They easily fit in the Orion the Iguana Hunter magazines for the DRS.

 

[markhooper]

looks like a hollow point but it also looks like the hollow point is filled with something?
I'd be interested in the slugs hollow point boat tail of you find them.
where did you buy the slugs?
Mark

 

[Impact701]

looks like a hollow point but it also looks like the hollow point is filled with something?
I'd be interested in the slugs hollow point boat tail of you find them.
where did you buy the slugs?
Mark

They are not a hollow point, they have a flat front.

I bought them from Utah Airguns

 

[Ricochet]

They are not a hollow point, they have a flat front.
View attachment 584801

I bought them from Utah Airguns

Was this recovered? or are they this beat up?

 

[Impact701]

I have been shooting them at my KYL target it's 90 yards from my house.

It is very windy today.

Though it's not quite this windy in my yard.

Wind hold was very consistent.

These are probably the best manufactured slugs I have purchased.
The fact that the are packed in a zip lock bag before they are put in a tin helps.

These are slugs from various manufacturers.

I can see why they were competition winning slugs!

 

[Gerry52]

All slugs pictured have a pretty rough finish imho. What's up with that? How'd they get so beat up?

 

[Ricochet]

All slugs pictured have a pretty rough finish imho. What's up with that? How'd they get so beat up?

I agree, looks like they were picked up after laying in the middle of the road for a week. Especially the one far right..

 

[Impact701]

All slugs are fresh out of their respective packaging,whether it was a tin, cylinder or sleeve.

 

[Gerry52]

These are what mine look like after rolling around in a tin for a few weeks that gets carried in my pocket or a pouch. (.22 FX Hybrids on left & Daystate Howlers). I wonder why they don't show the same kind of uneven, marred finish.

 

[MACTEN]

Pure lead is very soft. I'm not sure what brand or mix the 3 on the left are but the one on the right that looks so bad is 100% pure lead which is likely why it looks beat.
But if they shoot like this who really cares. Afterall, the bore puts it's own imprint on them.

 

[CanMike]

FedEx just delivered my Airmarksman Ace slugs.
View attachment 584745

View attachment 584746

View attachment 584747

This is the 1st 10 shot group at 50 yards from my DRS Classic 22 700.

View attachment 584748

View attachment 584749

I have it set up shooting the H&N 34gr Heavy slugs at 975fps. I did not change any settings to shoot the Ace 40.1gr. slugs, they were going 937 fps.

After 5 sight in shots this is the 1st 100 yard group in gusty 12+ mph wind. I held .2 mil to the left for wind.

View attachment 584750

#7 was shooter.
The hole in the target is ⅞ of an inch.

Hopefully Airmarksman comes out with a high BC Boat Tail Hollow Point for hunting.

I am going to adjust my rifle to shoot them a little faster.

So far I really like the Airmarksman Ace slugs.

They easily fit in the Orion the Iguana Hunter magazines for the DRS.

View attachment 584772

Try them at 900/920 FPS as well.. They are similar design to the Altaros slugs and thats is kinda their recommended speed Thanks for Sharing the Pics..

Mike

 

[manabeknives]

These are what mine look like after rolling around in a tin for a few weeks that gets carried in my pocket or a pouch. (.22 FX Hybrids on left & Daystate Howlers). I wonder why they don't show the same kind of uneven, marred finish.View attachment 585674

Hey Gerry,
I receivedtwo tins of the slugs, and they do not look as rough as in the picture.
They are smooth and uniform…not like tree bark
hopefully, I will get a chance to try them out later
Mike

 

[woogie_man]

Waiting patiently to see if @Corbin will release the die set for these slugs....... so I can make my own and see what happen.

Curious to see what you guys think of them.