• *The discussion of the creation, fabrication, or modification of airgun moderators is prohibited. The discussion of any "adapters" used to convert an airgun moderator to a firearm silencer will result in immediate termination of the account.*

Gauntlet SL30 Barrel Replacement

So after being down from an injury I finally decided to clean the barrel I received from Thammer. First I ran a mop through it and it snagged towards the last few inches of the barrel. I ran a brush through it with a patch and the same thing happened. It got caught on something. Turned on my larger bore scope and maybe 2” from the end (exit side) of the barrel there’s a deep gouge that goes in deep, it removed 2 of the rifling ribs (not sure what you call them) Tried to slide a pellet through and it’s not making it past that gouge. So much for a replacement barrel. It looks like a screwdriver was pushed in there. Thammer I wish you would have at least looked down the barrel before finally sending it to me it’s visible without any special equipment to the naked eye.

Someone need a barrel to cut down? What a joke.
IMG_4653.jpeg
IMG_4654.jpeg