Treefrog's latest activity
Treefrog reacted to DixieTriggerMan's post in the thread Daisy Daisy 499B Muzzle Velocity with
Like. I sent an email to Daisy this morning about my 499B. I'm sure their first priority is answering "real" customer questions about parts...- My 499b with a high power spring is shooting 423-424
- Treefrog replied to the thread Gamo Lead shavings.It looks like an alignment issue. I'd look at the magazine each time I cocked it to make sure that the pellets are aligned with the...
- I did some lead testing on a target 8 pumps in the green marks, 7 pumps in the black marker, 10 pumps on the orange arrows. 13.43gr JSB...
- Directly from Crosman using the Comeback2025 code. And they have them in stock.
- Needed for what? Benchrest? Hunting? I hunt. As long as my pellets or slugs behave accurately & consistently I've never had a need to...
- Treefrog reacted to Murfdurf82's post in the thread Crosman Crosman 1322 w MELLONAIR flat top trail and error with Like. I have a 1322 and I bought a 15" barrel, Flat top piston/valve installed and the exhaust port is opened +24%. Installed is a stock...
- Newly acquired Daisy 853. This particular one has a Elm wood stock. I haven’t seen these. Went through the entire gun. Total...
- Treefrog reacted to Powerstroke's post in the thread Seneca/Sam Yang Seneca Dragonfly MK 2 with Like. ***FLASH*** Working again! I didn't do anything...lol Just shot about 100 pellets, it's easy to pump but I'm worn out. Getting to...
- Treefrog reacted to Hateful McNasty's post in the thread Seneca/Sam Yang Seneca Dragonfly MK 2 with Like. Oil that is ... Texas tea..
- Treefrog reacted to Powerstroke's post in the thread Seneca/Sam Yang Seneca Dragonfly MK 2 with Like. Working now! The middle linkage near the end of the barrel needed a lot of oil!!! Working now, just pumped to 15 pumps and shot a C.P...
- With an oversize air tube a cobalt 327 main spring and a model 25 shot tube my model 111 40 red Ryder is shooting 365 fps. It is a...
- Treefrog reacted to Bear-of-Grayling's post in the thread Crosman Crossman 760 Powermaster with Like. It is likely, either the adjustment on the piston length (early ones are adjustable) to hold proper pressure or possibly a worn front...
- I found this one at my local gun shop in unusable shape. (853C) I'm about 40 miles South of the Canadian Border. Got the parts to...
- Hello all, I have a problem with an old powermaster from the 70’s. It’s a buddy of mines gun and I was trying to get it working for him...