Recent content by Teaboy

2021.5

Thanks Ernest, I applied the techniques to a sub 12 in the UK. Obviously the fps is a lot lower (8.4 g at 780 fps) and the start reg pressure is low compared to you unlimited guys. But the process and techniques work. Remove the HST and valve limiter from stage 1 by maxing the HST and backing...

Great review as always, cheers Steve 

2210

Great looking in the laminate stock, nice rifle.

Great that we in the UK can enter, cheers Chris

After an initial setup it's now running very well with a standard deviation of 2.5, well pleased. No creep. Mission accomplished!! Thanks guys for your advice on this issue. Cheers an merry Christmas Just bought this, Daystate Wolverine R in 177. Very good, very different from the impact but...

Carbon shroud is a Airfective stage 1, very quite, great quality and does not look too heavy. Cheers for the advice BarNone, rifle now rebuilt with new reg pistol, testing and tuning tomorrow. Cheers 

Just a bonus pic of my rig, just because.

Thanks frank320 I've been going by Steve's video (AEAC) in which me turns in until the velocity starts to drop then backs out just a bit. Would be good to get confirmation from the horses mouth though. Look forward to you getting a response . Chris 

Thanks frank320 Appreciate your post and will use that info when I retune my rifle, all the best. Chris 

Hi frank320 Did you watch for velocity drop as you turned the valve in or did you look for consistency ? Interested in how you solved the problem. Cheers 

Hi BarNone It's a recent one, one piece cheek rest and serial number under the trigger guard. The new reg piston will be here tomorrow 

Sorry for the incorrect description . In the UK the regulator adjustment screw has the Allen key hole filled with an epoxy to stop you adjusting the reg pressure. Hot needle and pop it out and it's gone.

Whilst waiting for the o rings to arrive I decided to start the regulator disassembly . The valve rod shows signs of being adjusted down whilst under pressure. Before I removed the anti tamper I read up extensively on what to do and what not to do and I'm sure the dimple was not done by me. I...