Recent content by sagen

Tube size has almost nothing to do with light transmission as objective lens size has almost nothing to do with FOV.

That's what I was figuring was going on so I stopped trying to get those to group but the Premiers commonly go for $6 a tin of 500 so commonly it's not worth trying to save a few pennies.

They are hollowpoints but I have not noticed a difference in how they group vs domes. The Crossman wadcutters in the carton shoot terribly in this gun though, like a shotgun group.

Do polymags fit in your mags okay? I've heard some longer stuff doesn't fit super well.

Did some shooting with the L2 today testing what velocity the premiers like. Set the reg pressure to 95 bar and that got me around 695-700 FPS. This was at 35 yards sitting supported with unsorted pellets(pretty sure I had a few dented skirts if the fliers are any indicator. With this tune in 22...

I need at least one preferably 2 magazines in .25 cal not looking to spend retail

Works pretty well focusing it can be a pain, it does cut down on the light quite a bit so you might need more illuminaton than normal. More magnification=less light.

This setup has been very good for defending the chicken coop from pests. Leshiy 2 250 .22 West Hunter 3-12x44 L3 Filmless pvs 14 Cheapo adjustable illuminator.

Update: I installed a lane regulator set to 1200 psi and one of those Malaysian straight pull breaches. Still have the bstaley mod but went to a standard hammer spring. I decided to leave the gauge block in place so I can pick up the gun and see if I had some air in it. Very happy with the...

650 should be good I don't really plan on shooting this past 75 ever I have a 25 bobcat set up for that. Just want a very compact little gun that can drive tacks and shoot pests out to 50 yards 

I was planning on regulating my marauder pistol and was thinking about how to properly tune the valve/hammer for proper plenum usage. My first thought was to use something to limit the air in the unregulated cylinder down to the plenum size. (I think on the Huma it is about 5cc) I did some math...

My MSA doesn't have the "push to close" feature that we dont want. 

I use synthetic compressor oil and ran it for a half hour with little load until the oil turned dark then changed it let it cool. After that I went to fill all 4 of my guns and a 45 cubic foot tank to 4500 psi. All took about an hour and a half with coolimg times(only using 2.5 gallons of water)

Where do you buy the leyla? I haven't found a dealer with them.

I just bought a "used" Sniper K in .357 and I'm getting 770-750 fps with the JSB pellets and awesome accuracy at 50 yards. The air venturi 90grn bullets are okay but a 1.5 inch group at 50 isnt great for me. Also just bought a Donnyfl Emperor that I havent tried out yet.