RoosterCogburn's latest activity

Yeah, the dreamline is an awesome gun to learn the finer points of perfecting a tune on. with a .25 @ relatively high power i was still...

hi thank you for your help much appreciated 👍 I've got a problem now I'm trying to take the air chamber out and it's getting stuck...

It's definitely a pain in the butt, but you'll be fine, I'm sure you're talking about the two a frame risers that hold the rail? just...

Right on my magic spot with the .177 was 160-120 they’d pack right in.

You can't just crank the wheel to max and bottom out the Internal 1.5mm Screw. you'll end up past the knee and losing power. With the...

thank hi thank you for getting in touch with me i now have with my partner done 2 o ring's 1 near the regulator and 1 near the barrel...

unless you have a regulator tester it's going to be difficult. Also with 177 I don't know the operating pressures best for the...

Dreamline isn't the slouch people think. A dreamtac .25 with a 15cc power plenum can produce 58-60fpe. Add the huma power tune spring...

Finally after USPS got done playing around the world we go, I got parts to finish up the 1377 and the 1377 PCP regulated. Just filled to...

Cracked apart the Uragan and took the reg up to 132.5bar. Was at 125b getting just over 41.5-45.5 FPE depending on projectile. Now...

H&N slugs have been my go-to ammo for years especially the 25gr Gen2 slugs that are extremely accurate/precise in my FX Impact MK2. It...

where in the fill cycle did you get that cluster in the neck? i'd fill to that pressure and utilize solely that range if you're...

Orderd .308 150gr BARS slugs, scope cover from ScopeShield and PCP Tank Valve 30mpa 300bar Air Tank Valve.

Completely agree. The wind is why I shoot slugs to begin with. Where I live it’s always windy…. But it shocks me that I still these...