Ratzy's latest activity

Yeah, figured that out when I put the butt plate back on. Then I had to find the adjusting screw for the pressure. Inside the 2 slot...

Yes and a plenum

Well, JTS 33.96GR pellets down range at 960FPS with reg setting of 220bar. Mechanism pretty loud at that pressure. Uses a lot of air...

If recent history is a clue on the barrel the M60/Zelos seems to be a solid build.

Cranking it up was next on my todo list. Mine looks to be factory set as has been reported to 190bar. I'll probably go up to 220bar...

How hard do you have to detune a rifle to make .177 go slow like that.

I am an old school engineer and firmly believe in KISS. The modern high end guns are just far too complex. I see people spend $2500 or...

Thanks, I'll await your results. It is well put together and the trigger is a good feel right out of the box. I'm not one that likes...

I on the other hand have several. Gauntlet G30 Evanix Sniper X2 Airforce Talon and Condor AEA Terminator .30 Frankly my Hatsan Barrage...

I'm with ya on being a little underwhelmed. I think the first batch they made a mistake with the transfer ports. As I said in the...

Not only are they amazing at fishing faster than just about anyone state side, their customer service is SUPERB! I bought a huma reg...

In my engineering experiments with plenums transfer ports were something I intentionally avoided and used the Airforce platform...

I'm getting 70fpe with the 35g cast peanut slugs but at 210 bar. The 4mm barrel TP is anemic. I didn't get to the valve but I'm...

Advertised power was 120j/88fpe with .22 slugs I'm getting 90j/66fpe with .25 46gr slugs or .25 33.8gr pellets with factory setup...

I'm not impressed so far. Advertised 120 joules/88FPE with .22 slugs I'm getting 90 joules/66FPE with .25 slugs or pellets. Everything...