Ratzy's latest activity

A83 fits perfectly for 1/2-20 adapter

I took my .22 Talon with 18 inch barrel, AliExpress tophat, Trajectron 95gr hammer and heavy spring and set the Huben Power Cricket...

Received my A83 M28x1 to 1/2-20 moderator adapter. Works perfectly, mounted a Reximex Silent Force moderator and loaded up H&N Heavy...

Again, not what I was doing. Whether or not this applies to low or high power was not a criteria. It was, as I have stated, optimizing...

Also, haven't delved into volume limitations. The Condor was set up with high flow tophat, heavy hammer and spring. I'd like to have...

Big bore pellet weights, I haven't done any research there but I imagine it takes a much higher starting pressure to accelerate those...

I didn't miss his point, it had nothing to do with what I was working on. As for your points quite possibly valid but I need a larger...

You are explaining something that I was not looking for. Optimization of plenum volume based upon barrel volume. It has zero to do...

Because the significant other saw the credit card bill.

Many PCPs have a way to adjust hammer spring tension on the fly. Doing so will change valve lift and dwell to be more suited to lighter...

Not saying you are wrong, pointing out my objective was different. I was looking for optimized plenum volume not how much energy. Yes...

We added the MAx 1 in today at the shop will be doing a complete teardown and inspection. Will post our results from factory settings...

I saw all that and did the math to optimize the plenum based upon barrel. I was more interested in the fall over point where the...

Yeah, the great advantage of the AirForce guns is simplicity. 5 screws and 10 minutes a .177 12 inch becomes a .25 24 inch. Upgrades...

On that model i believe it is on top of the motor on the right side. But the other issue is the current draw for the compressor is to...