nervoustrig's latest activity

When degassing a Gauntlet clear the gun first. If you forget the pressure reaches low enough the hammer lets loose and a pellet goes...

Golf balls sending a pellet back at the shooter is a repeated theme over the years. One I didn’t anticipate was 10m shooting with a low...

Just FYI, one of the $30 infrared chronographs will do fine for basic PCP tuning. https://www.amazon.com/dp/B098XJLHGT For example...

Check that the hammer spring tension is adjusted properly. If it is set too heavy, the gun will expel more air than necessary and be...

Well... I was making these parts for a friend and noticed just HOW MUCH the chip pile was for these 3 little parts. Not having a CNC...

How long is the barrel?

Classic description of a failure of the fill port O-ring...

30W silicone oil is a good weight for hand pumps. I can’t comment on the preferred type for lubricating slugs. As far as using...

Have you tried removing the side cocking lever/putting the gun back to the previous state? If accuracy returns, you will have a cause...

Killed 15 last night. Made a video of 10 of the kills. Look closely at the first head shot you’ll see and you’ll notice the blood...

If it’s a real basket case, look into electrolysis rust removal. The nice thing about it is it will remove all rust, including in the...

Scott, I think you read it as the Superpoints. He’s referring to the H-Points:

I haven’t used the Super H-Points in a while but I remember my first airgun shot them well, and they were absolute wrecking balls on...

Casting another vote for the cheap clamp-on. I have multiple chronographs including an FX and a ProChrono but the little $30 clamp-on...

30 bucks. Rechargeable and reliable. https://www.amazon.com/dp/B098XJLHGT?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1