Ltomlin's latest activity

Mine is a little loose until pressurized, then tightens up. Honestly I have no reason to take the valve on and off, so I put it on once...

Got it all back together with new peek poppet today, done in less than 10 minutes, no issues back to work.

Happy Saturday Looking to replace the stock gauge on my zelos (receiver, not stock air tube), and also on my Huben Dream valve on my...

I went with peek option, said it’s better under higher pressure and I’m running mine on higher side. Says it may take a few pressurized...

Funny that’s EXACTLY what I just did! Can’t be too careful.

I haven't ever dry fired it without air in the cylinder.

Found the issue - poppet is broken in half! Not sure what causes that, maybe all the porting I did? Now I have to search for another one...

EDIT ** The air is coming from the breech / barrel when the probe is pulled back. When it’s pushed in it stops hissing. Is that the...

Zeroed my Notos today outside finally ... After 5 shots it went from firing normal with authority to a "plink" sound when I pulled...

Thanks for the input. I hooked it back up to compressor and filled back to 4000 psi, my Huben gauge on the input (fill) side reads...

Hi - good info thanks. And yes, unless my gauge is way off it’s around 1250? Pics of both attached. The valve is ported along with...

Tried some new "copper coated" .22 cal H&N 14.66 grain pellets in the NOTOS today just out of curiosity. Put them up against my normal...

50 was about $15

Got the new 90 durometer Viton orings in today, slightly smaller than standard but very firm. Lubed up and installed on zelos nipple...

I have the exact same plenum in a box still took it off. I thought extras came with it … the port on the rifle has this brown oring...