Ltomlin's latest activity

In case any of you in the USA want to try the 7x1.5 mm 90 durometer orings ref above, here is a link to a supplier in VA. I couldn’t...

I’m going to try one slightly smaller and one slightly larger, so yes there may be a slight difference in mine vs yours. I’ll keep you...

Yes the 7x1.5 still gets crushed when putting back on under pressure from the bottle ... Good point on lubing every time ... I will try...

Just an update maybe this will help someone else having issues after converting over to the Huben valve and bottle. If you attempt to...

I am having an issue, I use the new Nate Chrony, and it seems that after every 15-20 shots the velocity starts to drop and eventually I...

Yes its a .25, great gun for the $, I added a cricket valve and the bottle, but this one will actually get a lot of shots from the...

Here you go … my new Zelos also! That one shoots at about 750 fps and 45 lb fpe. It’s a beast that I haven’t even considered digging...

Thanks Thanks - with this 4500 psi .42 liter bottle it should give me upwards of 75-100 shots before dropping pressure below reg @ 1500...

Here are 25 shots with 18 grain at 1500 psi on regulator. Seems to be a good range.

For sure I ended up probably about $800 all in, with air compressor and all the other things I ended up with. I did the drilling and...

Yep I also turned reg down to 1500 and still got avg of 900 fps and 25 fpe. I’ll grab some heavier pellets and go from there. Appreciate...

Hi guys no offense taken and thanks for your reply! No real goal here other than getting ports opened up seeing what this could do power...

Hi guys - I just got done with opening up all the ports, added Huben Dream valve with bottle, 500mm barrel kit from C-88, regulator set...

Yes it was a little scary but I took my time. Messed with the hammer spring a little but honestly not sure I need any more power for any...