Recent content by laalex

Thanks for the heads up. Thinking of tuning mine when I get the time.

If I’m not mistaken it’s a b18/19. Crosman makes them cheaper.

Sounds like the anti bear trap is jammed. Possibly something in the linkage is bent. The main spring is definitely compressed so I would not recommend trying to open it up with your spring compressor. As mentioned earlier take it carefully out of the stock and inspect the cocking linkage and...

I’d go 460 all the way. I have a D48 and a 350 and the 48 is way easier to shoot accurately. 48 is not a bad option either. Don’t believe the tripe about it’s awkward to use at the bench it’s easier than a break barrel once you learn how. Good luck with it whatever you decide.

I have 2 of the edge versions. Built like a tank but very rough shot cycle and very heavy heavy triggers. No aftermarket trigger trigger so diy if you want better. Flying flying dragon Diana clones or gamo better entry level options imo 

$496.55

I use on of these to repair and flare the skirts of JSB pellets. No need to throw out the ones with bent skirts. As an added bonus, I get an additional 30-40 fps with the 13.4 gr. pellets out of my D48. Good luck with the 95, she's a beauty...

For the sake of argument, take a .177 cal. barrel and a .22 cal. barrel of identical lengths, block one end of each and fill with water. Pour the water out into equal size glass tubes an see which contains more water. The .22 contains more of course, and by a fair margin. So the .22 barrel...

These have a great reputation, however I can't tell you firsthand that they are any better than the one you ordered: http://www.airgunsofarizona.com/scope-mounts/sportsmatch-hop19c-1-pc-1-inch-high-scope-mount-with-0.75mm-droop-compensation/ IIRC, there is a Vortek kit that fits the...

Do yourself a favor and add $54.99 to your budget and get one of these: https://www.walmart.com/ip/RWS-Model-34-P-.177-Air-Gun-Synthetic-Stock-Black/44680696. It's in a different class than the Crosman "Nitro Piston" and Hatsan guns that populate the "Refurbished Airguns" page on many...

Found this @ AGD. Like the poster above I've never owned one, but they tend to get good reviews. When the Diana 34's come up as refurbs they are around the same price, which to me is as good as it gets for under $200. BTW, I have two refurbs from AGD and both were immaculate when I...

My 34 rubbed a bit when I first got it. I think the woodwork was off--not the action. I removed about 1/32" from one side and all was good. The 350 is a heck of a rifle but will test your patience. Scotty

34 no question. I've owned 1 Hatsan- a model 85. Stoutly built with a good barrel. Terrible trigger (Quattro) and generally rough around the edges. With a good tune probably a decent hunter with more power than the 34. My 34 was spot on accurate and adequate power for squirrel hunting-great...

Here ya go: http://www.airrifleheadquarters.com/catalog/item/251488/7718385.htm http://vortekproducts.com/ourstore/airgun%20Springs/OEM%20Springs?product_id=127 Good luck. BTW, my old Crosman Phantom, which was a direct copy of the Gamo, did high 700's with those same...

Your issue is most likely due to the lube in the chamber having to warm up. Temperatures in the compression tube get up very high for a small fraction of a second at each shot. The lube thickens when cool. I would recommend against putting "chamber lube" through the transfer port--tends to...