Recent content by kpaoletti

Does anyone still shoot the original Evanix Select Fire guns that had the full auto switch?

Want to buy an Evanix Conquest in 9mm (0.35). Send pictures, serial number and price. Please no scammers

Regardless how much I turn it it still leaks. Plastic washer must have taken a set. Probably need a new washer. Thanks

What is the best way to seal a pressure gage to prevent leaks. Doesn't appear to be an o-ring only threads.

Setscrews removed but still can not get tank to move. Any suggestions? Thanks

Still need help. Have the two setscrews on the bottom of the frame removed but tank will not come out. Is it threaded into frame or does it just pull out. Is there something other than the two set screws holding it in? Thanks

Thanks for your reply. Took setsecrews out and looked into holes. Hole nearest trigger showed groove but back hole showed some brass object. Do you have to remove set screws or just loosen? Any hints on how you get the tank out of the frame? Thanks

Sortie developed air leak. Need information on how to remove tank from gun and replace o-rings.

Just wanted to see if anyone else has developed shipping problems. I used to have no problems shipping but now UPS says they will open and inspect the package at their hub if I tell them it is an airgun. The local UPS store says the rules have changed and now you have to tell them what is in...

Send me an email at [email protected]. I may have something you want.

I am looking for some suggestions on the best way to sell off my airgun collection. I have 32 air rifles and pistols. Some are NIB and all have been shot very little. Almost all of the airguns have a full automatic feature. I am 89 years old now and will be downsizing soon. Any comments...

Anyone have an email address to order the flanges? Thanks

Hi, I can not give any advice on returning but I do have some experience on getting them working. I bought both a 0.22 and 0.25 Sortie and had to do a lot of adjustments to get them to work properly. But once I found the proper air pressure, hammer setting and reloading muzzle cap position...

If I use the correct settings and pellets I have no problem with the magazine jamming or the gun firing in semiauto mode.. If the bolt does not retract completely it will not allow the magazine to rotate but this is not jamming. If I want to test a magazine I load it with pellets and then...

Saw your collection of full auto airguns and am glad to see I am not the only crazy collector. A couple of years ago I decided I would collect only semi and full auto BB and pellet guns. Now I have 7 pistols and 16 rifles in my collection. I keep telling myself no more guns and then run across...