Kenjeepman's latest activity

I had asked them how to get the v3+ spring because the spare part diagram list the original 7x31 spring. Was told to request it in the...

V3-+ long spring 1.500 Fully collapsed.750 W/ .250 striker depth = 1.010 spring when installed. At high power it wont take much to...

Theres a reason Huben has max power numbers of 40/30 fpe .. not sure .177. My 25 is at 38 fpe with no issues. Theres no stop for the...

The first v3+ upgrade kit i got had a striker with a small hole and no plug. Longer spring of coarse. This combo was not consistent...

Blue or white? huben has a multiple different donuts in use. Blue, white, thinner, thicker. The original blue donut in my 25 broke apart...

Very much so (acts) like a regular, been thinking this ever since i went down the rabbit hole learning how this think operates.

Ive had the same issue where the firing valve would not close slowly letting out the air. Eventually sealing up towards the end of the...

inside the firing valve. A oring and peek backing seal. I believe early valves were threaded together. Theres no way to screw/unscrew...

Right now i have the jsb 16’s at around 15 ft lbs. 2 mags 20 down to 20 mpa. Hopefully this weekend i can up the power see if i can get...

I'm having same issues as kenjeepman. props to him for putting this work in. Mine is a 177 and I have a great 4 mag tune at 12ftlb...

Usually out. If you can not put the gun in safe the striker needs to be reset manually.

Theres 3 springs in use. The original 7x31 spring thats also in the spare bag. A slightly longer spring which is the K1 spring and the...

And Huben likes to change parts fairly often . Learned some v3 GK1’s had v3+ parts. I ordered a V3+ upgrade kit from Wolfiek and also...

Normal

I prob would of thrown the 22 block in the scrap bin if it wasn’t for Kelly’s help/encouragement. Going to have him make me a custom...