Recent content by engfred

Hi Doc, I had a FX Crown Gen 1 for 5-6 years and had the same experience. It was bought with a 500 mm barrel and I later bought both .177 and .22 600 mm barrels. I even made a 700 mm DIY barrel too with a near solid 25 mm carbon pipe. The POI shift problem is probably not the Barrel if you have...

Hi it is of course good with the alternativ choise. But I am a left shooter myself - and I have no issues with the magazine at all.

Hi Seb. The problem is probably that the valve is balanced and by that more sensitive to o-ring sticking. A traditional valve have the pressure in plenum to help keeping the valve closed. So when the o-ring sticks the error will only be like between half or one third. So be sure to use the...

Nice to hear you got updated.... Forget about all the pressure talk that comes from people with mechanical rifle experience. Just set the pressure high enough so you can shoot the max. fpe you need. That a certain pressure is needed to obtain accuracy is bull poop. That statement is surely...

Sorry Guys, Here is a fresh link..... Download link to folder: Delta-AlphaWolf Again I cannot say how the rifles will perform in other calibers than .177... But my Deltawolf .177 HP rifle is set to 158 bar - and it shoots everything from 8.44 gr up to 20 gr. very well with this pressure. It...

You cannot mess around the danish weather- Wind is gusty and often changes direction - Saturday I was shooting with Soren with my new Impact M4 - I can say it shoots great - but I did not break any personal records. I look forward to see your Epic shoot "live" some day. I always like the Epic...

Bambu printers really nails it..... I use a P1S with AMS

It is very rifle and especially barrel depending. My RedWolf .177 HP with ART Polygon barrel shoots 13.43 Knockouts like a lazer out to +100 meter My Delta Wolf with the 600 mm ART polygon Barrel shoots the same perfect but best around 920-930 fps. If I shoot them faster fliers start to...

Good point - you might be right - but with my fat cheeks - I don't think the can catch any edges anyway.... :-) But anyway I bought two new set of low scope mounts, since my Delta wolf has adjustable mounts and by that i had to install 10 mm spacers. So for start the Deltawolf scope will be...

I am awaiting to receive my first Impact M4 Sniper hopefully later this week. So since I am a Left shooter I wanted to be prepared. So I did a left and Right version based on a thingiverse left shooter version i found. Mine is more solid than the one found - and also shaped more advanced than a...

Sorry to hear that - Arthritis is poop - and then yes that is a different matter.

Thank you for the nice words. I dont see the point of speed loaders - I just make a bunch of ManuLoaders and fill them all up ready too shoot. As long as the rotors are parked on the X they are closed and all pellets or slugs sits safely in the holes in the rotor. Iven if you give the magz. a...

I was comparing with Sorens updated DW and his newer AW that just did a better job. I also added the Barrel clamp system a 4-6 weeks ago and that gave a lot of stability to the rifle - It is rock solid now. I also remembered that Daystate changed O-ring size on the Aluminium Chronograph holders...

This is my gen 1 compared to the original holder without airstripper This is the first Daystate model in Polymer without airstripper at the bottom and the newer Daystate Aluminium type with integrated Airstripper at the top, so still black colour. The first one has got four holes venting...

Custom converted original pipe shaped Pellet probes to ø1.5 mm Ultra Pin-propes. The ø1.5 pin is to utilizing full area air-flow, corresponding to the opened Transfer ports area that was gained from opening the port from ø3.2 mm hole to oblong holes 3.5 x 5.5 mm. That matters and its like the...