Search results for query: *

Hi There, I experienced the same when I got my Avenger. Earlier I experimented with barrel bands, and I don't believe in fixing the barrel with the air tank/s. So I designed a new front for my Avenger that fixes the two pressure pipes together by clamping the the three parts together with m3...

Correction you have to shoot 3-4 shots to reach the speed with a new first time selected speed. When the 4 shots within speed +/- 4 fps are shot it stores the settings for that speed. So if you come back to like 800 fps it will already know what pulse and voltage are needed. You can check if...

Sorry for late reply. I think the problem is that in Factory mode the rifle will automatic get the right speed if the requested speed and the measured speed on the integrated chronograph is within +/- 100 fps. With your entered request 800 fps and the result measured 600ish the factory mode will...

I dont know if it will match the Athlon Midas TAC 5-25x56? But i made one for my Midas Tac. One push over version and one with easy click on system. (You fix the small adaptor to the turret and) The parallax wheel can be pushed on and will be fixed by three small spring loaded balls. Private me...

Sorry I did not get to answer you before. Yes I have been printing with a heavy updated Creality printer for about 4 years gaining a lot of practical experience. Then in January this year I bought a Bambu Lab P1S Combo with AMS filament system. By from the very first prints I discovered that all...

This looks more like diy 3d print

Good Reason hehe - Do not ask my wife for a good reason :cool: Accuracy, Accuracy, for the most. - and I also like to fill 10 magz and then shoot. I designed magazines for many different rifles - mostly for the fun to be able to design something that works better, easier to use and have more...

I havent checked but a 20 gr. Zan fits easily in the .177 magz. I can check what i can fit into my DIY magz for the DW/AW

Hi to all. The video will be a bit delayed. I will need to secure that Soren gets a new diy adaption of one rifle barrel to another of his rifles. When his rifle can shoot slugs I will start at the video. So video will not be tomorrow. But its not forgotten. Engfred

Hmmmm .... Yes and no and hhhmmm. When you make your own custom pellet og slug setting like as an example Zan 20 gr slugs. You need to prepare to get three minimum 3 slug speeds. This is the maximum speed you can shoot them. The lowest interesting speed you will shoot the slug and minimum one...

Daam, Expensive picture to show- Now my Delta Wolf also needs long ones too :-)

Hi All, I did not see this thread before today. I am doing good progress setting up standard Factory settings for my .177 DW HP with 23" barrel. So I prepared Factory settings for following (The Pellets and Slugs in my stock) Pellets JSB 8.44 gr. OK JSB 10.34 gr. OK JSB 13.43 gr. OK JSB...

Hi Bassman Do a quality check on your scope. Take your scope of the rifle and fix to a solid bench so you can move your head up and down and to the sides without touching the rifle stock and by that the scope. Next set up a target like 30 yards away. I dont know if your cheap scope has got...

Interesting a new M16 thread- a few years ago there was a lot of hype about these M16 and M16a and Diana Outlaw. I bought a M16 in .177 to test out and because it was cheap. When I received it and opened the box, there were a bunch of steel pins in the bottom of the box. And it could not...

Thanks for your reply. If you look for maximum expansion - Especially the JSB Knockout slugs expands very good due to the use of a much softer lead than like H&N slugs. Anyway the amout of liners comes with how FX releases new lines. My Crown was born with a STX liner in 500 mm .177. Then i...

Very light with Tin compared to lead.

JaceSpace Are you getting same accuracy with like 25 gr slugs with Superior liner as with the Superior Heavy in .22? If I don't get better slug performance at 100 meter I am disappointed - I now waited 9 weeks for a Superior Heavy liner to come home. In Denmark this is like a FAC barrel...

Hehe thats ok. So I am still on my own figuring out the results. I will post information on my test after the weekend. Best regards from Denmark

Just saw this old thread. How was the results of changing valve springs? I just purchased 4 different and lighter forced valve springs to test in my FX Crown gen.1 My worries is how much weaker could the valve spring be? I found 4 standard springs giving from half the force up to a reduction...

I dont really know but i think it is the best barrel out there. It shoots just about any pellets ok. Some types perfect, and shoots a lot of slugs very well too. But with the Knockouts too be exceptional. Impressing is the large speed window, compared with FX liners.