Recent content by charlie99

  1. charlie99

    Pyramyd AIR - 4th of July Sales!!!

    Is the code "Eagle" a single use? Or once per day? I placed an order then tried to do another order and said the code no longer works. Was about 5 minutes apart. Was for a large order of pellets.
  2. charlie99

    Will dry air dry out occassional moisture intrusion

    I believe what is being asked is if topping off a tank that may have moisture with dry air, if it will remove existing moisture. In my opinion I believe that it would reduce some moisture. I think it's kind of like when you do a transmission flush. You're not removing all of the bad fluid...
  3. charlie99

    Beeman raider and 3d printed moderator

    If its shooting way higher than before using the moderator, your barrel might not me tight on properly. Thats what I would check first and all screws.
  4. charlie99

    Official Thread - Alkin owners - check in!

    I use a dryer plug on mine, and have it connected with a splitter. The yellow with green I connected to ground then the other two dont matter as they are both hot as I understand it. Just cant run the dryer and compressor at same time. I also use a 220v 30A cord that I use for my floor sanding...
  5. charlie99

    Other AirForce Knockoff First Look + Other Pinty Guns

    Hey do you happen to have any more of these adapters made or are you willing to make me one?
  6. charlie99

    Other AirForce Knockoff First Look + Other Pinty Guns

    I have received my pinty rifle/carbine today. In my opinion it's nice for the price. Also it appears that avenger/avenge x magazines work at least in mine. May not be as smooth but they functioned all 10 shots. Also anyone able yo point me in the right direction for m14? Moderator or 1/2 unf...
  7. charlie99

    Air Venturi How often do you drain out water?

    You should not be getting water in your pcp's. You should make sure that the compressor has proper water/moisture filtration prior to filling guns. I personally used a yong heng from the beginning and drained the moisture valve on the compressor every 5 minutes or so. i also replaced the cotton...
  8. charlie99

    Air Venturi Air Venturi Avenger 22 cal

    If it is the original avenger and not the avenge x, then you will need a mod adapter. You can buy the adapter from https://donnyfl.com/products/air-venturi-avenger-extender-1-2-x-20-adapter-a64?_pos=1&_sid=f9557fc77&_ss=r they also sell moderators. I have used this one...
  9. charlie99

    Other AirForce Knockoff First Look + Other Pinty Guns

    My apologies if it's already been asked. Is the rifle version of the pinty also regulated? If anyone knows it would be appreciated.
  10. charlie99

    Hatsan Hatsan flash with Huma regulator, max tank pressure effect

    Pyramid has the regulated flash, and under its specifications it says 250 bar max fill. I would assume that is the maximum safe fill pressure.
  11. charlie99

    Budget Gun Battle!

    Any update on the video results? I'm interested to know the outcome.
  12. charlie99

    Krale And UPS Import charge??

    If you are talking about the bottle regulator, hajimoto sells them and they are here. I ordered one about 2 weeks ago. https://hajimotoproductions.com/index.php/product/hubenpower-zelos-regulator/
  13. charlie99

    Scba filling valve questions

    I have not heard of the gauge to burst on the fireman scba tanks. They are made to go into burning buildings. I have several and they are all good to go for several years.
  14. charlie99

    Need lightweight, cheap 22 PCP Rifle for occasional rabbit elimination

    While not a pcp, I believe that the Diana trailscout would work for only shooting ~200 shots a year. https://www.pyramydair.com/product/diana-trailscout-co2-air-rifle?m=5803#11893 Its a co2 rifle and very light. It takes 3 co2 cartridges, but you can use 1,2, or 3 by replacing empty ones in...