bubbahotep's latest activity

Mine was like 49.5 pounds total package to stay under more expensive 50lb freight weight. I doubt you can stay under freight weight if...

Blackpowder lead rounds have a grease groove. Copper jackets were needed for higher FPS without ridiculous fouling.

Above 950 fps youll get fouling you need to clean out. Lube reduces this fouling. Below 950 fps you do not get lead fouling.

I need a "plumun 90cc" and an "ambidexter side lever design" for my rifles.

Lead fouling starts above 950 fps. Consider lubing your pellets.

i concur the trigger spring is not needed the sear will reset the trigger and if you install the screw and lower the sear screw the...

Did you get the snowpeak t-rex bullpup and wished you got the 35x? Have you seen the 35x-tb coming soon?

The vibration would quickly destroy any relay/contact based timer, do it outside the unit.

750-950 fps.

2:27 they remove the axle screw. The barrel is press fit into the breech. It shouldn't come out of the breech block. I imagine it's...

You can completely tear it down and put it back in a few minutes. Theres several vids

remove two grip screws (phillips #1), lift and pry off the rubbery grip. Remove the remaining six #2 phillips screws and the case should...

It doesn't. I think the barrel axle nut fell off and the extra slop pushed the barrel out eventually. you can see the gasket is more...

no, dont exceed 950fps because of lead fouling. use heavier ammo.

Adjustment screw has no useful effect until you remove the trigger spring. You can get it as light as you want afterwards just by the screw.