bubbahotep's latest activity

i concur the trigger spring is not needed the sear will reset the trigger and if you install the screw and lower the sear screw the...

Did you get the snowpeak t-rex bullpup and wished you got the 35x? Have you seen the 35x-tb coming soon?

The vibration would quickly destroy any relay/contact based timer, do it outside the unit.

750-950 fps.

2:27 they remove the axle screw. The barrel is press fit into the breech. It shouldn't come out of the breech block. I imagine it's...

You can completely tear it down and put it back in a few minutes. Theres several vids

remove two grip screws (phillips #1), lift and pry off the rubbery grip. Remove the remaining six #2 phillips screws and the case should...

It doesn't. I think the barrel axle nut fell off and the extra slop pushed the barrel out eventually. you can see the gasket is more...

no, dont exceed 950fps because of lead fouling. use heavier ammo.

Adjustment screw has no useful effect until you remove the trigger spring. You can get it as light as you want afterwards just by the screw.

Easy hair trigger upgrade, remove trigger spring, thats all! Adjust the existing highlighted screw inwards to further reduce trigger...

This $20 black one is one piece and 1.3mm instead of 1mm like blue from my measurements. and is one piece instead of bolted...

Couldnt resist getting $400 semi auto pistol threaded for silencer for $255 refurb with the freedom20 20% discount code...

Buy whatever thickness springwire and wrap around a bolt of the same pattern. Drilling a hole near the bolthead to hold the start of the...

pretty much should i inspect tank everytime i need to change media. With normal earth physics id expect it to dry eventually or even be...