BriarpatchMtn's latest activity
BriarpatchMtn replied to the thread Issues with brand new GX CS4 compressor.Simply tell them you wouldn't have a clue as to what you'd be looking at, or for. Even if you have the mechanical ability I'd play dumb...- BriarpatchMtn replied to the thread Nickel, Dime, Dollars 😂.Just in from work. 94's outside, 70% humidity. Clock on wall says 87 degrees in living room. But with ceiling fans, and mountain breeze...
- BriarpatchMtn replied to the thread Compressor Safety.Don't trust print on cheap hose. Forgot I had this pic. Max I fill is 4500 psi
- BriarpatchMtn replied to the thread CS4i? Is there an issue?.I had a poor crimped connector on the negative wire where diode jumps the wires. Ran fine, didn't notice it until wiring in a hour...
- BriarpatchMtn replied to the thread One way valve for filling scba tanks..It will hold air indefinitely, just like an air gun, so long as there isn't an o-ring leak. Would take more $$ to install a gauge into...
- BriarpatchMtn replied to the thread GX CS4 100hrs Cylinder Pulled, Was it Worth It.Just did a 6.8 cylinder top off from about 245 to 310bar. Took 55 minutes straight run. Head temp reached 120F and water 110F (Ambient...
- BriarpatchMtn replied to the thread GX CS4 100hrs Cylinder Pulled, Was it Worth It.Around 28 seconds. This really wasn't worth the effort since everything was working. What's 3 or 4 seconds. Well know the saying, "If it...
- BriarpatchMtn posted the thread GX CS4 100hrs Cylinder Pulled, Was it Worth It in Tanks, Pumps, Compressors.Apologies for a long one I'm assuming that it hasn't been just me watching the hour meter climb and wondering whether, "Have I been...
- Swag gotta have swag, oh and a scale to weigh stuff and tools to maintain stuff and a safe to store stuff hmmmm gotta have a supply of...
- I am fortunate enough to have started down the PCP road within budget over 10 years ago. $1000 bought me a brand new gen 1 Marauder, a...
- BriarpatchMtn replied to the thread Nickel, Dime, Dollars 😂.Back woods living has it's perks. Can start mowing my grass at 5am on a Sunday morning and no one around to complain. Could shoot out my...
- BriarpatchMtn replied to the thread Nickel, Dime, Dollars 😂.Honey I only want pellet gun and a compressor. Well ok. 18 months later I getting the look :cautious:. Still shoveling the hole deeper...
- BriarpatchMtn replied to the thread Issues with brand new GX CS4 compressor.I'm certainly not an expert or know all on the GX4 compressors, far more knowledgeable people on the forums than me. Have had mine 18...
- BriarpatchMtn replied to the thread Stoeger Updated Warranty Replacement for XM1 Bullshark Arrived From Benelli Today.@JimD Have book marked several of you post on things done with your guns. Going to wait till I learn more about what my gun wants before...
- BriarpatchMtn replied to the thread Correct way to fill a brand new Zelos without pressure via a CS4-I.Lots of threads here about the GX compressors to research and get information. Mine's the CS4 and just hit 100hrs, am going to do a tear...
