AlanMcD's latest activity

As you are rebuilding it, be sure to inspect the sealing surfaces where the o-rings sit in their grooves and against the tube to make...

Maybe Tom Kaye himself would tell us. Anybody know him well enough to ask? I’ve never met him, but I think a few here know him.

One big factor in whether a regulator will help with shot to shot consistency is the size of the reservoir vs. the number of shots you...

Just clarifying that Jack probably means filling the tank in stages for the initial fill from empty. Most folks do top offs in one run...

Eye protection is always a good idea when filling a gun or doing anything with HPA for that matter. Ideally you would be wearing them to...

There are a few other things too - gen 2 added a depinger, and changed the valve springs as well, but the biggest change was the...

I have a couple of JSAR aluminum tubed Marauders and they are phenomenal. I also have a bottled Marauder that I built up that is great...

I wasn't looking for a Marauder (in any caliber), but she's one of those finds you (read that, I) simply cannot NOT glom onto. 💸...

I’ll provide you some context from someone who got into this hobby the same way you may be about to. I needed a tool to eliminate...

Maybe a trap and relocate the GH 's ? Cage traps are less than $100 OR a cage trap and gangland style head shot with a gun you already...

True, but I remembered you were looking at the CS-4 . . .

The other thing you could do (outside the box thinking here) is store it in the garage in a way that it can't freeze. One thought is to...

To degas any gun i usually just loosen the reg gauge till it starts to leak and wait for it to stop. No big deal

Almost all of those bottles have an M18 x 1.5 thread on them, but some mount via a separate valve that allows the bottle to be removed...

Jim nailed it - there was no upper limit of recommendation until after the K1/K2 models were in the market for a while. This was...