6gun's latest activity

Well i do"

Now I'm curious if there's a pattern to the failures you're suffering and wonder which orings they are(by rough position description).

I’ve used Mc master-Carr before and they are great to deal with. However if you don’t feel like trying to measure and order, there are...

Even for tiger maple that is an exemptional piece of wood. You don't often see it figured that nicely on veneers for guitar tops...

The restoration of this 1999 Daisy 753 is now complete. The Tiger Maple stock really came to life. I’m thrilled to be the next caretaker...

Huma sells rebuilds, close enough to Europe I'd think.

Thanks to 6gun & DonR for your thoughts as well. Regarding the seals, took to measuring the width of them at outwards edge. New seal...

The loading of the motor. I just started feeding a yh psi till it started loading the motor beyond 1 amp over normal draw. It was...

Stage one is meant to go from atmospheric to like 150 I think. No science was involved with this post. Going 10 over throws off the power

If it's the bench, just tether imo. I almost went down the big bottle road too with my m3 700mm. Glad I didn't.

Yeah, i have a little buddy bottle for hunting. This way the gun stays light, and I can refill air if needed to in the stand or at the...

It can. You just have to do it in stages with cool downs. 97 is what brancato advertises the great white as iirc. I have one. I...

Buy the great white , or buy a used scba. The genset won't really be necessary and a 500 dollar genset doesn't tell me the output or...

Air is 78% n2, so it doesn't matter. I don't use 6K n2, as it is handling large, heavy tanks and requires expensive regulators. I feed...

It's always a try it and find out thing. Airguns are too unique in their setup and too sensitive to minor changes to be able to spit...