6gun's latest activity

Cool, Let us know if you see any performance changes with Nitro. I have a Umarex Komplett that I swap between Nitro, co2 and compressed...

I found it for a pretty reasonable price, the air that was in my tank came from a quality compressor, Air Tex which has a coalesce and...

Mostly because nitrogen is dry. If you put nitrogen into a contaminated container it defeats the purpose of nitrogen altogether aside...

It won't matter much, most of the air we breathe is nitrogen anyhow. The only concern is how much moisture you may or may not have in...

18s and even 25 grain monsters should be fine stock. If it's not enough then perhaps a 14 gram hammer. I made some just above that...

Let's just say conventional 7/8-14 reloading press threads. I'd start swaging if they were on par with a good set of dies price wise.

Will Corbin slug dies function in RCBS Rockcrsher press, or a Dillon press?

The S-Type Slug Forming dies are made Strictly for the S-Press... But Corbin used to make make Pellet Swage Die to be used with a...

There's one cheater move for dried pump seals that I have used along with simple green (not together) . It is not ideal because it...

The rubber cups in the early pump heads can be replaced. You just have to dig the old rubber out of the head and then cut those teeth...

I know one of us will end up getting it. Even if it takes some overly complex mounting system or good velcro to get around the cap...

I'm thinking that's the route I will end up having to take! Just thought I'd post on here first to see if anybody had any place to get...

See those 4 stainless socket head cap screws in the rubber? I'm thinking remove the rubber pads and make some small suede covered...

392 was my first air rifle. Now I want to find this steroid kit, but mac1ag looks abandoned.

The rifle is a sort of long story but I got it and three more at Academy some years back for $35 each. I gave one to my sister, life...